[Wed Aug  1 10:03:16 2012] Detection parameters:
  Position = (320.0, 305.0) = 0 6 19.44 20 12 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177548.5 +/- 483.7
  Background counts = 14.1
  Rate = 5 +/- 0.01

[Wed Aug  1 10:03:18 2012] Off-axis axis estimate = 1.64'
[Wed Aug  1 14:59:06 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 14:59:06 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Aug  1 14:59:06 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Wed Aug  1 14:59:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Wed Aug  1 16:06:20 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  1 16:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 16:06:20 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  1 16:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 16:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 16:06:20 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  1 16:06:20 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  1 16:06:20 2012] Fit fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  1 16:06:49 2012] Spatial fit model total counts = 158604.000000, observed total counts = 160760.000000
[Wed Aug  1 16:06:49 2012] Offset between fit and detection position for source 2 = 0.146680 pixels
[Wed Aug  1 16:06:49 2012] 158384.000000 total counts/ 25600.000000 bgd. counts: snr = 829.900000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.146680 pixels
  Position = (319.9, 305.0) = 0 6 19.49 20 12 9.2
  Extent = 6.1 (6.1-6.2)", rotation angle = 0
  Source counts = 132784.0 +/- 398.0
  Background counts = 25600.0
  Rate = 4 +/- 0.01
[Wed Aug  1 16:06:49 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 16:06:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 16:06:49 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 16:06:49 2012] Source does appear to be extended
[Wed Aug  1 16:06:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 18:50:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 18:50:25 2012] Initial guess for spatial extent in simple fitting = 6.14"
[Wed Aug  1 18:50:25 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.095
[Wed Aug  1 18:50:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.14"
[Wed Aug  1 19:09:40 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  1 19:09:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0101040101_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 19:09:40 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  1 19:09:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0101040101_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 19:09:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101040101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101040101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 19:09:40 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  1 19:09:40 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  1 19:09:40 2012] Fit fullrun_mos2_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  1 19:09:51 2012] Spatial fit model total counts = 158595.000000, observed total counts = 160760.000000
[Wed Aug  1 19:09:51 2012] Offset between fit and detection position for source 2 = 0.000567 pixels
[Wed Aug  1 19:09:51 2012] 158376.000000 total counts/ 25600.000000 bgd. counts: snr = 829.850000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000567 pixels
  Position = (319.9, 305.0) = 0 6 19.49 20 12 9.2
  Extent = 6.1 (6.1-6.2)", rotation angle = 0
  Source counts = 132776.0 +/- 398.0
  Background counts = 25600.0
  Rate = 4 +/- 0.01
[Wed Aug  1 19:09:51 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 19:09:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 19:09:51 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 19:09:51 2012] Source does appear to be extended
[Wed Aug  1 19:09:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 23:38:43 2012] Counts = 132776.000000, rescaling region sizes by 3.000000
[Wed Aug  1 23:38:43 2012] XMMSAS src. selection expression = ellipse(27783.116340, 26485.415400, 1104.719432, 1104.719432, 0.000000, X, Y)
[Wed Aug  1 23:38:43 2012] Writing source region out to fullrun_mos2_xmm0101040101_pi300-10000_pass1_cl_src2_src.reg
[Wed Aug  1 23:38:43 2012] Extracting stamp from image fullrun_mos2_xmm0101040101_pi300-10000_cl_sm2.00.img.gz, (256, 241) - (383, 368)
[Wed Aug  1 23:38:43 2012] XMMSAS bgd. selection expression = annulus(27783.116340, 26485.415400, 5523.597159, 11047.194318, X, Y) && !ellipse(29151.478000, 26232.130800, 1208.424035, 1208.424035, 0.000000, X, Y) && !ellipse(28459.816010, 26016.063324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28762.176056, 26992.676025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27938.820400, 23928.675600, 1224.224035, 348.584810, 86.271201, X, Y)
[Wed Aug  1 23:38:43 2012] Writing fullrun_mos2_xmm0101040101_pi300-10000_pass1_cl_src2.gif
[Wed Aug  1 23:38:54 2012] Mean detx,y = (-127.00, -206.12) 
[Wed Aug  1 23:38:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 23:42:03 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 23:42:03 2012] Setting source spectrum file to fullrun_mos2_xmm0101040101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Aug  1 23:42:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0101040101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Aug  2 00:01:29 2012] Updating aperture counts using extracted products
[Thu Aug  2 00:01:29 2012] Error reading totcts from fullrun_mos2_xmm0101040101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug  2 00:01:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 00:01:29 2012] Using photon index=1.80, rate=3.9, arf fullrun_mos2_xmm0101040101_pi300-10000_pass1_cl_src2.arf
[Thu Aug  2 00:01:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 00:01:29 2012] Updating source flux to 4e-11
[Thu Aug  2 00:02:21 2012] Reading fit data from xmm0101040101/analysis//spectral/fullrun_mos2_xmm0101040101_pi300-10000_pass1_cl_src2_pl.csv
[Thu Aug  2 00:02:21 2012] Spectral fit parameter nH value = 4.92594e+19
[Thu Aug  2 00:02:21 2012] Spectral fit parameter PhoIndex value = 2.42317
[Thu Aug  2 00:02:21 2012] Failed to get F(0.3-8.0) from xmm0101040101/analysis//spectral/fullrun_mos2_xmm0101040101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Aug  2 00:02:21 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 00:02:21 2012] Using Nh = 4.9e+19, photon index=2.42, rate=3.9, arf fullrun_mos2_xmm0101040101_pi300-10000_pass1_cl_src2.arf
[Thu Aug  2 00:02:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 00:02:21 2012] Updating source flux to 3.3e-11