[Wed Aug  1 10:03:17 2012] Detection parameters:
  Position = (499.2, 344.9) = 0 5 24.06 20 15 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.8 +/- 9.9
  Background counts = 7.2
  Rate = 0.002 +/- 0.0003

[Wed Aug  1 10:03:18 2012] Off-axis axis estimate = 14.94'
[Wed Aug  1 14:59:06 2012] Using EEF radius (= 13.90 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 14:59:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  1 14:59:06 2012] Initial guess for spatial extent in simple fitting = 13.90"
[Wed Aug  1 14:59:06 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.025
[Wed Aug  1 14:59:06 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 13.90"
[Wed Aug  1 16:06:20 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src21.ximg exists
[Wed Aug  1 16:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src21.csv
[Wed Aug  1 16:06:20 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Aug  1 16:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src21.csv
[Wed Aug  1 16:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 16:06:21 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Aug  1 16:06:21 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Aug  1 16:06:21 2012] Fit fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Wed Aug  1 16:06:49 2012] Spatial fit model total counts = 179.992000, observed total counts = 180.000000
[Wed Aug  1 16:06:49 2012] Offset between fit and detection position for source 17 = 0.342323 pixels
[Wed Aug  1 16:06:49 2012] 184.691900 total counts/ 164.371000 bgd. counts: snr = 1.585004
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.342323 pixels
  Position = (498.9, 345.1) = 0 5 24.15 20 15 3.1
  Extent = 3.5 (3.5-5.4)", rotation angle = 0
  Source counts = 20.3 +/- 13.6
  Background counts = 164.4
  Rate = 0.0006 +/- 0.0004
  Deleting source due to low Poisson probability