[Wed Aug  1 10:03:16 2012] Detection parameters:
  Position = (410.0, 457.5) = 0 5 51.59 20 23 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.9 +/- 7.7
  Background counts = 7.3
  Rate = 0.0009 +/- 0.0002

[Wed Aug  1 10:03:18 2012] Off-axis axis estimate = 14.08'
[Wed Aug  1 14:59:06 2012] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 14:59:06 2012] Initial guess for spatial extent in simple fitting = 13.47"
[Wed Aug  1 14:59:06 2012] source mask rpix=3.1, npix_max = 51, mask sum = 53, frac = 1.024
[Wed Aug  1 14:59:06 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 13.47"
[Wed Aug  1 16:06:20 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src30.ximg exists
[Wed Aug  1 16:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src30.csv
[Wed Aug  1 16:06:20 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Aug  1 16:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src30.csv
[Wed Aug  1 16:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 16:06:21 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Aug  1 16:06:21 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Aug  1 16:06:21 2012] Fit fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Aug  1 16:06:49 2012] Spatial fit model total counts = 158.262000, observed total counts = 155.000000
[Wed Aug  1 16:06:49 2012] Offset between fit and detection position for source 11 = 0.385908 pixels
[Wed Aug  1 16:06:49 2012] 158.869300 total counts/ 142.030000 bgd. counts: snr = 1.412973
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.385908 pixels
  Position = (409.8, 457.8) = 0 5 51.66 20 23 13.6
  Extent = 3.4" x 3.4", rotation angle = 0
  Source counts = 16.8 +/- 12.6
  Background counts = 142.0
  Rate = 0.0005 +/- 0.0004
  Deleting source due to low Poisson probability