[Wed Aug  1 10:02:40 2012] Detection parameters:
  Position = (417.4, 319.2) = 0 5 49.37 20 13 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.4 +/- 10.9
  Background counts = 7.7
  Rate = 0.004 +/- 0.0006

[Wed Aug  1 10:02:41 2012] Off-axis axis estimate = 8.75'
[Wed Aug  1 14:21:27 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 14:21:27 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Wed Aug  1 14:21:27 2012] source mask rpix=2.5, npix_max = 35, mask sum = 22, frac = 0.618
[Wed Aug  1 14:21:27 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.80"
[Wed Aug  1 14:59:06 2012] fullrun_mos1_xmm0101040101_pi300-10000_cl_pass0_src7.ximg exists
[Wed Aug  1 14:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101040101_pi300-10000_cl_pass0_src7.csv
[Wed Aug  1 14:59:06 2012] fullrun_mos1_xmm0101040101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Aug  1 14:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101040101_pi300-10000_cl_pass0_src7.csv
[Wed Aug  1 14:59:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101040101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101040101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 14:59:06 2012] fullrun_mos1_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Aug  1 14:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Aug  1 14:59:06 2012] fullrun_mos1_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Aug  1 14:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Aug  1 14:59:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 16:06:43 2012] Spatial fit model total counts = 151.968000, observed total counts = 110.000000
[Wed Aug  1 16:06:43 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  1 16:06:43 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 16:06:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 16:06:43 2012] Assessing source extent using major
[Wed Aug  1 16:06:43 2012] Source does appear to be extended
[Wed Aug  1 16:06:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 16:06:43 2012] Deleting source due to low Poisson probability 0.9