[Mon Aug 27 03:56:15 2012] Detection parameters:
  Position = (297.2, 322.2) = 20 37 21.66 75 36 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 16748.2 +/- 152.5
  Background counts = 24.5
  Rate = 1 +/- 0.009

[Mon Aug 27 03:56:15 2012] Off-axis axis estimate = 1.73'
[Mon Aug 27 04:49:30 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 04:49:30 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Aug 27 04:49:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon Aug 27 04:49:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Aug 27 04:54:21 2012] fullrun_mos2_xmm0100650201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 27 04:54:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0100650201_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 04:54:21 2012] fullrun_mos2_xmm0100650201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 27 04:54:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0100650201_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 04:54:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100650201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100650201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 04:54:21 2012] fullrun_mos2_xmm0100650201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 27 04:54:21 2012] fullrun_mos2_xmm0100650201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 27 04:54:21 2012] Fit fullrun_mos2_xmm0100650201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 27 04:54:27 2012] Spatial fit model total counts = 14191.100000, observed total counts = 13916.000000
[Mon Aug 27 04:54:27 2012] Offset between fit and detection position for source 1 = 0.237510 pixels
[Mon Aug 27 04:54:27 2012] 14216.910000 total counts/ 3202.110000 bgd. counts: snr = 194.651831
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.237510 pixels
  Position = (297.0, 322.4) = 20 37 21.87 75 36 2.6
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 11014.8 +/- 119.2
  Background counts = 3202.1
  Rate = 0.7 +/- 0.007
[Mon Aug 27 04:54:27 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 04:54:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 04:54:27 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 04:54:27 2012] Source does appear to be extended
[Mon Aug 27 04:54:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 06:32:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 27 06:32:50 2012] Initial guess for spatial extent in simple fitting = 5.67"
[Mon Aug 27 06:32:50 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.922
[Mon Aug 27 06:32:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.67"
[Mon Aug 27 06:35:26 2012] fullrun_mos2_xmm0100650201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 27 06:35:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100650201_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 06:35:26 2012] fullrun_mos2_xmm0100650201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 27 06:35:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100650201_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 06:35:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100650201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100650201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 06:35:26 2012] fullrun_mos2_xmm0100650201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 27 06:35:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100650201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Aug 27 06:35:26 2012] fullrun_mos2_xmm0100650201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 27 06:35:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100650201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Aug 27 06:35:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100650201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100650201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 06:35:31 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Mon Aug 27 06:35:31 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 06:35:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 06:35:31 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 06:35:31 2012] Source does appear to be extended
[Mon Aug 27 06:35:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 06:59:42 2012] Counts = 11014.800000, rescaling region sizes by 3.000000
[Mon Aug 27 06:59:42 2012] XMMSAS src. selection expression = ellipse(25790.265860, 27998.493200, 1021.050029, 1021.050029, 0.000000, X, Y)
[Mon Aug 27 06:59:42 2012] Writing source region out to fullrun_mos2_xmm0100650201_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 27 06:59:42 2012] Extracting stamp from image fullrun_mos2_xmm0100650201_pi300-10000_cl_sm2.00.img.gz, (238, 264) - (356, 381)
[Mon Aug 27 06:59:42 2012] XMMSAS bgd. selection expression = annulus(25790.265860, 27998.493200, 5105.250147, 10210.500294, X, Y) && !ellipse(22326.053162, 33166.867004, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 27 06:59:42 2012] Writing fullrun_mos2_xmm0100650201_pi300-10000_pass1_cl_src1.gif
[Mon Aug 27 06:59:46 2012] Mean detx,y = (-39.32, 49.84) 
[Mon Aug 27 06:59:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 07:03:24 2012] grppha failed
[Mon Aug 27 07:03:24 2012] Setting source spectrum file to fullrun_mos2_xmm0100650201_pi300-10000_pass1_cl_src1_src.pi.gz
[Mon Aug 27 07:03:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100650201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 27 07:04:20 2012] Updating aperture counts using extracted products
[Mon Aug 27 07:04:20 2012] Error reading totcts from fullrun_mos2_xmm0100650201_pi300-10000_pass1_cl_src1_src.pi.gz
[Mon Aug 27 07:04:20 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 07:04:22 2012] Source 1 has no response, skipping
[Mon Aug 27 07:04:23 2012] xmm0100650201/analysis//spectral/fullrun_mos2_xmm0100650201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete