[Tue Jul 24 04:06:37 2012] Detection parameters:
  Position = (280.8, 336.5) = 15 3 51.28 47 40 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.1 +/- 22.4
  Background counts = 34.9
  Rate = 0.007 +/- 0.001

[Tue Jul 24 04:06:38 2012] Off-axis axis estimate = 3.04'
[Tue Jul 24 04:09:23 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 04:09:23 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Tue Jul 24 04:09:23 2012] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.969
[Tue Jul 24 04:09:23 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.95"
[Tue Jul 24 06:17:23 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src35.ximg exists
[Tue Jul 24 06:17:23 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Jul 24 06:17:23 2012] Fit fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src35 appears to have run properly
[Tue Jul 24 06:17:24 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Jul 24 06:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Jul 24 06:17:24 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Jul 24 06:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Jul 24 06:17:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 07:04:52 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 13.242210 pixels away
[Tue Jul 24 07:04:52 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 07:04:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 07:04:52 2012] Assessing source extent using major
[Tue Jul 24 07:04:52 2012] Source does appear to be extended
[Tue Jul 24 07:04:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 07:05:04 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 07:05:04 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Tue Jul 24 07:05:04 2012] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.969
[Tue Jul 24 07:05:04 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.95"
[Tue Jul 24 08:03:10 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src18.ximg exists
[Tue Jul 24 08:03:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src18.csv
[Tue Jul 24 08:03:10 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Jul 24 08:03:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src18.csv
[Tue Jul 24 08:03:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 08:03:10 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Jul 24 08:03:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Jul 24 08:03:10 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Jul 24 08:03:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Jul 24 08:03:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 08:20:01 2012] Spatial fit model total counts = 2416.590000, observed total counts = 2155.000000
[Tue Jul 24 08:20:01 2012] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 24 08:20:01 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 08:20:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 08:20:01 2012] Assessing source extent using major
[Tue Jul 24 08:20:01 2012] Source does appear to be extended
[Tue Jul 24 08:20:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 08:20:06 2012] XMMSAS src. selection expression = ellipse(24378.956329, 29227.424805, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 24 08:20:06 2012] Writing source region out to fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src35_src.reg
[Tue Jul 24 08:20:06 2012] Extracting stamp from image fullrun_pn_xmm0100650101_pi300-10000_cl_sm2.00.img.gz, (243, 299) - (318, 374)
[Tue Jul 24 08:20:06 2012] XMMSAS bgd. selection expression = annulus(24378.956329, 29227.424805, 1087.500000, 2175.000000, X, Y) && !ellipse(25139.357600, 27779.694400, 1659.124402, 1659.124402, 0.000000, X, Y) && !ellipse(27687.786000, 26521.914000, 1178.192034, 1178.192034, 0.000000, X, Y) && !ellipse(28377.314000, 26089.576000, 2331.760067, 2331.760067, 0.000000, X, Y) && !ellipse(23354.856000, 28698.776000, 1159.864033, 1159.864033, 0.000000, X, Y)
[Tue Jul 24 08:20:06 2012] Writing fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src35.gif
[Tue Jul 24 09:03:02 2012] Mean detx,y = (1183.89, -1306.83) 
[Tue Jul 24 09:03:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 09:03:28 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 09:03:29 2012] Setting source spectrum file to fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Jul 24 09:03:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue Jul 24 10:32:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 24 10:32:00 2012] rmf not generated due to insufficient counts
[Tue Jul 24 11:04:20 2012] Updating aperture counts using extracted products
[Tue Jul 24 11:04:20 2012] Error reading totcts from fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Jul 24 11:04:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 11:04:20 2012] Using photon index=1.80, rate=0.00695, arf fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src35.arf
[Tue Jul 24 11:04:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 11:04:20 2012] Updating source flux to 2.6e-14
[Tue Jul 24 11:04:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting