[Tue Jul 24 04:06:37 2012] Detection parameters:
  Position = (317.2, 305.9) = 15 3 35.62 47 38 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 477.3 +/- 31.5
  Background counts = 32.6
  Rate = 0.02 +/- 0.001

[Tue Jul 24 04:06:38 2012] Off-axis axis estimate = 1.46'
[Tue Jul 24 04:09:23 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 04:09:23 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Tue Jul 24 04:09:23 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.869
[Tue Jul 24 04:09:23 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.16"
[Tue Jul 24 06:17:22 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jul 24 06:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src2.csv
[Tue Jul 24 06:17:22 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jul 24 06:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src2.csv
[Tue Jul 24 06:17:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 06:17:23 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jul 24 06:17:23 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jul 24 06:17:23 2012] Fit fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jul 24 07:04:52 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Tue Jul 24 07:04:52 2012] Spatial fit model total counts = 1885.470000, observed total counts = 1878.000000
[Tue Jul 24 07:04:52 2012] Offset between fit and detection position for source 2 = 1.720407 pixels
[Tue Jul 24 07:04:52 2012] Warning, changing simple spatial fit ID from 2 to 3
[Tue Jul 24 07:04:52 2012] 1913.526000 total counts/ 854.426000 bgd. counts: snr = 36.232620
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.720407 pixels
  Position = (318.8, 305.4) = 15 3 34.91 47 38 11.6
  Extent = 14.7 (14.7-29.5)", rotation angle = 0
  Source counts = 1059.1 +/- 43.7
  Background counts = 854.4
  Rate = 0.07 +/- 0.003
[Tue Jul 24 07:04:52 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 07:04:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 07:04:52 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 07:04:52 2012] Source does appear to be extended
[Tue Jul 24 07:04:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 07:04:52 2012] Source is confused with source 3
[Tue Jul 24 07:05:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 24 07:05:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 24 07:05:04 2012] Initial guess for spatial extent in simple fitting = 14.73"
[Tue Jul 24 07:05:04 2012] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.927
[Tue Jul 24 07:05:04 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 14.73"
[Tue Jul 24 08:03:09 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jul 24 08:03:09 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src2.csv
[Tue Jul 24 08:03:09 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jul 24 08:03:09 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src2.csv
[Tue Jul 24 08:03:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 08:03:10 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jul 24 08:03:10 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jul 24 08:03:10 2012] Fit fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jul 24 08:20:01 2012] Warning, spatial fit 2 centroid is now closest to src. 4
[Tue Jul 24 08:20:01 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 08:20:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 08:20:01 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 08:20:01 2012] Source does appear to be extended
[Tue Jul 24 08:20:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 08:20:06 2012] Counts = 1059.100000, rescaling region sizes by 2.000000
[Tue Jul 24 08:20:06 2012] XMMSAS src. selection expression = ellipse(27687.786000, 26521.914000, 1767.288051, 1767.288051, 0.000000, X, Y)
[Tue Jul 24 08:20:06 2012] Writing source region out to fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src2_src.reg
[Tue Jul 24 08:20:06 2012] Extracting stamp from image fullrun_pn_xmm0100650101_pi300-10000_cl_sm2.00.img.gz, (217, 204) - (420, 407)
[Tue Jul 24 08:20:06 2012] XMMSAS bgd. selection expression = annulus(27687.786000, 26521.914000, 5890.960170, 11781.920339, X, Y) && !ellipse(25139.357600, 27779.694400, 1659.124402, 1659.124402, 0.000000, X, Y) && !ellipse(28004.684000, 26263.886000, 1145.536033, 1145.536033, 0.000000, X, Y) && !ellipse(28377.314000, 26089.576000, 2331.760067, 2331.760067, 0.000000, X, Y) && !ellipse(29460.473718, 25574.298428, 1333.576038, 413.309060, 27.849946, X, Y) && !ellipse(30068.706527, 25259.139665, 1302.808037, 425.674818, 28.485222, X, Y) && !ellipse(30401.600000, 25075.918000, 1302.808037, 1302.808037, 0.000000, X, Y) && !ellipse(30843.573600, 24874.375200, 1333.576038, 419.163212, 27.857500, X, Y) && !ellipse(32575.730000, 23990.114000, 1529.112044, 1529.112044, 0.000000, X, Y) && !ellipse(34928.228165, 22779.322456, 1640.432047, 405.667349, 28.902995, X, Y) && !ellipse(37747.628876, 21359.517624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16290.343201, 30910.062897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33836.011383, 32017.510132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23354.856000, 28698.776000, 1159.864033, 1159.864033, 0.000000, X, Y) && !ellipse(24378.956329, 29227.424805, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 24 08:20:06 2012] Writing fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src2.gif
[Tue Jul 24 08:25:43 2012] Mean detx,y = (283.12, 2312.23) 
[Tue Jul 24 08:25:47 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 08:29:39 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 08:29:39 2012] Setting source spectrum file to fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul 24 08:29:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jul 24 11:04:19 2012] Updating aperture counts using extracted products
[Tue Jul 24 11:04:19 2012] Error reading totcts from fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul 24 11:04:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 11:04:20 2012] Using photon index=1.80, rate=0.0688, arf fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src2.arf
[Tue Jul 24 11:04:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 11:04:20 2012] Updating source flux to 2.1e-13
[Tue Jul 24 11:04:58 2012] Flag c found in src. 2 procflags, skipping spectral fitting