[Tue Jul 24 04:06:37 2012] Detection parameters:
  Position = (289.6, 319.9) = 15 3 47.49 47 39 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220154.6 +/- 537.2
  Background counts = 36.0
  Rate = 9 +/- 0.02

[Tue Jul 24 04:06:38 2012] Off-axis axis estimate = 1.69'
[Tue Jul 24 04:09:23 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 04:09:23 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Jul 24 04:09:23 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Tue Jul 24 04:09:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Tue Jul 24 06:17:22 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 24 06:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 06:17:22 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 24 06:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 06:17:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 06:17:23 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 24 06:17:23 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 24 06:17:23 2012] Fit fullrun_pn_xmm0100650101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul 24 07:04:52 2012] Spatial fit model total counts = 185561.000000, observed total counts = 190929.000000
[Tue Jul 24 07:04:52 2012] Offset between fit and detection position for source 1 = 0.091590 pixels
[Tue Jul 24 07:04:52 2012] 185624.000000 total counts/ 25600.000000 bgd. counts: snr = 1000.150000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.091590 pixels
  Position = (289.5, 319.9) = 15 3 47.52 47 39 14.5
  Extent = 6.9 (6.9-6.9)", rotation angle = 0
  Source counts = 160024.0 +/- 430.8
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.03
[Tue Jul 24 07:04:52 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 07:04:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 07:04:52 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 07:04:52 2012] Source does appear to be extended
[Tue Jul 24 07:04:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 07:05:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 24 07:05:04 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Tue Jul 24 07:05:04 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.145
[Tue Jul 24 07:05:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.91"
[Tue Jul 24 08:03:09 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 24 08:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src1.csv
[Tue Jul 24 08:03:09 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 24 08:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src1.csv
[Tue Jul 24 08:03:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 08:03:10 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 24 08:03:10 2012] fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 24 08:03:10 2012] Fit fullrun_pn_xmm0100650101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul 24 08:20:01 2012] Spatial fit model total counts = 185526.000000, observed total counts = 190929.000000
[Tue Jul 24 08:20:01 2012] Offset between fit and detection position for source 1 = 0.000008 pixels
[Tue Jul 24 08:20:01 2012] 185589.000000 total counts/ 25600.000000 bgd. counts: snr = 999.931250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000008 pixels
  Position = (289.5, 319.9) = 15 3 47.52 47 39 14.5
  Extent = 6.9 (6.9-6.9)", rotation angle = 0
  Source counts = 159989.0 +/- 430.8
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.03
[Tue Jul 24 08:20:01 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 08:20:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 08:20:01 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 08:20:01 2012] Source does appear to be extended
[Tue Jul 24 08:20:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 08:20:06 2012] Counts = 159989.000000, rescaling region sizes by 3.000000
[Tue Jul 24 08:20:06 2012] XMMSAS src. selection expression = ellipse(25139.357600, 27779.694400, 1244.343301, 1244.343301, 0.000000, X, Y)
[Tue Jul 24 08:20:06 2012] Writing source region out to fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul 24 08:20:06 2012] Extracting stamp from image fullrun_pn_xmm0100650101_pi300-10000_cl_sm2.00.img.gz, (218, 248) - (361, 391)
[Tue Jul 24 08:20:06 2012] XMMSAS bgd. selection expression = annulus(25139.357600, 27779.694400, 6221.716507, 12443.433014, X, Y) && !ellipse(27687.786000, 26521.914000, 1178.192034, 1178.192034, 0.000000, X, Y) && !ellipse(28004.684000, 26263.886000, 1145.536033, 1145.536033, 0.000000, X, Y) && !ellipse(28377.314000, 26089.576000, 2331.760067, 2331.760067, 0.000000, X, Y) && !ellipse(29460.473718, 25574.298428, 1333.576038, 413.309060, 27.849946, X, Y) && !ellipse(30068.706527, 25259.139665, 1302.808037, 425.674818, 28.485222, X, Y) && !ellipse(30401.600000, 25075.918000, 1302.808037, 1302.808037, 0.000000, X, Y) && !ellipse(30843.573600, 24874.375200, 1333.576038, 419.163212, 27.857500, X, Y) && !ellipse(32575.730000, 23990.114000, 1529.112044, 1529.112044, 0.000000, X, Y) && !ellipse(34928.228165, 22779.322456, 1640.432047, 405.667349, 28.902995, X, Y) && !ellipse(37747.628876, 21359.517624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16290.343201, 30910.062897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12009.016861, 30529.591888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33836.011383, 32017.510132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23354.856000, 28698.776000, 1159.864033, 1159.864033, 0.000000, X, Y) && !ellipse(24378.956329, 29227.424805, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 24 08:20:06 2012] Writing fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src1.gif
[Tue Jul 24 08:20:25 2012] Mean detx,y = (250.25, -56.05) 
[Tue Jul 24 08:20:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 08:25:27 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 08:25:28 2012] Setting source spectrum file to fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 24 08:25:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul 24 11:04:19 2012] Updating aperture counts using extracted products
[Tue Jul 24 11:04:19 2012] Error reading totcts from fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 24 11:04:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 11:04:20 2012] Using photon index=1.80, rate=10.4, arf fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src1.arf
[Tue Jul 24 11:04:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 11:04:20 2012] Updating source flux to 3.1e-11
[Tue Jul 24 11:07:08 2012] Reading fit data from xmm0100650101/analysis//spectral/fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jul 24 11:07:08 2012] Spectral fit parameter nH value = 3.89661e+21
[Tue Jul 24 11:07:08 2012] Spectral fit parameter PhoIndex value = 5.02161
[Tue Jul 24 11:07:08 2012] Failed to get F(0.3-8.0) from xmm0100650101/analysis//spectral/fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jul 24 11:07:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 11:07:08 2012] Using Nh = 3.9e+21, photon index=5.02, rate=10.4, arf fullrun_pn_xmm0100650101_pi300-10000_pass1_cl_src1.arf
[Tue Jul 24 11:07:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 11:07:08 2012] Updating source flux to 1.8e-11