[Mon Jul  9 00:01:49 2012] Detection parameters:
  Position = (309.0, 289.8) = 0 42 57.11 85 18 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.2 +/- 11.9
  Background counts = 17.4
  Rate = 0.001 +/- 0.0002

[Mon Jul  9 00:01:49 2012] Off-axis axis estimate = 0.99'
[Mon Jul  9 01:36:19 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 01:36:19 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Mon Jul  9 01:36:19 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.914
[Mon Jul  9 01:36:19 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 6.92"
[Mon Jul  9 02:58:50 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_src41.ximg exists
[Mon Jul  9 02:58:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_src41.csv
[Mon Jul  9 02:58:50 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_src41_1.ximg exists
[Mon Jul  9 02:58:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_src41.csv
[Mon Jul  9 02:58:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 02:58:51 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Mon Jul  9 02:58:51 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Mon Jul  9 02:58:51 2012] Fit fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Mon Jul  9 02:59:12 2012] Spatial fit model total counts = 245.000000, observed total counts = 245.000000
[Mon Jul  9 02:59:12 2012] Offset between fit and detection position for source 50 = 0.113026 pixels
[Mon Jul  9 02:59:12 2012] 241.053900 total counts/ 194.109000 bgd. counts: snr = 3.369501
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.113026 pixels
  Position = (309.0, 289.7) = 0 42 57.28 85 18 23.4
  Extent = 4.7 (3.2-6.6)", rotation angle = 0
  Source counts = 46.9 +/- 15.5
  Background counts = 194.1
  Rate = 0.0008 +/- 0.0003
[Mon Jul  9 02:59:12 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 02:59:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 02:59:12 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 02:59:12 2012] Source does appear to be extended
[Mon Jul  9 02:59:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 04:23:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  9 04:23:59 2012] Initial guess for spatial extent in simple fitting = 4.73"
[Mon Jul  9 04:23:59 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.191
[Mon Jul  9 04:23:59 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 4.73"
[Mon Jul  9 05:41:27 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_src40.ximg exists
[Mon Jul  9 05:41:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_src40.csv
[Mon Jul  9 05:41:27 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_src40_1.ximg exists
[Mon Jul  9 05:41:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_src40.csv
[Mon Jul  9 05:41:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 05:41:28 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Mon Jul  9 05:41:28 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Mon Jul  9 05:41:28 2012] Fit fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Mon Jul  9 05:41:51 2012] Warning, spatial fit 40 centroid is now closest to src. 53
[Mon Jul  9 05:41:51 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 05:41:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 05:41:51 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 05:41:51 2012] Source does appear to be extended
[Mon Jul  9 05:41:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 06:31:47 2012] XMMSAS src. selection expression = ellipse(26831.968860, 25154.336200, 283.688558, 283.688558, 0.000000, X, Y)
[Mon Jul  9 06:31:47 2012] Writing source region out to fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src50_src.reg
[Mon Jul  9 06:31:47 2012] Extracting stamp from image fullrun_mos2_xmm0100640201_pi300-10000_cl_sm2.00.img.gz, (293, 273) - (325, 306)
[Mon Jul  9 06:31:47 2012] XMMSAS bgd. selection expression = annulus(26831.968860, 25154.336200, 472.814264, 945.628528, X, Y)
[Mon Jul  9 06:31:47 2012] Writing fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src50.gif
[Mon Jul  9 06:43:14 2012] Mean detx,y = (1579.71, -2737.27) 
[Mon Jul  9 06:43:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 06:43:19 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 06:43:19 2012] Setting source spectrum file to fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Jul  9 06:43:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Mon Jul  9 07:08:44 2012] Not generating rmf since there are only 46 counts
[Mon Jul  9 07:08:44 2012] rmf not generated due to insufficient counts
[Mon Jul  9 07:11:55 2012] Updating aperture counts using extracted products
[Mon Jul  9 07:11:55 2012] Error reading totcts from fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Jul  9 07:11:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 07:11:55 2012] Using photon index=1.80, rate=0.000808, arf fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src50.arf
[Mon Jul  9 07:11:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 07:11:55 2012] Updating source flux to 9.9e-15
[Mon Jul  9 07:12:46 2012] Source 50 has fewer than 100.000000 counts, skipping spectral fitting