[Mon Jul  9 00:01:48 2012] Detection parameters:
  Position = (313.1, 232.8) = 0 42 43.49 85 14 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 580.0 +/- 29.2
  Background counts = 16.5
  Rate = 0.01 +/- 0.0007

[Mon Jul  9 00:01:49 2012] Off-axis axis estimate = 4.87'
[Mon Jul  9 01:36:19 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 01:36:19 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Mon Jul  9 01:36:19 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.970
[Mon Jul  9 01:36:19 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.87"
[Mon Jul  9 02:58:50 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jul  9 02:58:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_src2.csv
[Mon Jul  9 02:58:50 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jul  9 02:58:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_src2.csv
[Mon Jul  9 02:58:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 02:58:50 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jul  9 02:58:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Jul  9 02:58:50 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jul  9 02:58:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Jul  9 02:58:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 02:59:12 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 11.363941 pixels away
[Mon Jul  9 02:59:12 2012] Source 19 is offset by -3.553620 and 5.213531 pixels which is larger than
2 X fitted extent = 1.077595 x 1.077595, not incorporating fit results
[Mon Jul  9 02:59:12 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 02:59:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 02:59:12 2012] Assessing source extent using major
[Mon Jul  9 02:59:12 2012] Source does appear to be extended
[Mon Jul  9 02:59:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 04:23:59 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 04:23:59 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Mon Jul  9 04:23:59 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.970
[Mon Jul  9 04:23:59 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.87"
[Mon Jul  9 05:41:26 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jul  9 05:41:26 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jul  9 05:41:26 2012] Fit fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_src2 appears to have run properly
[Mon Jul  9 05:41:27 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jul  9 05:41:27 2012] fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jul  9 05:41:27 2012] Fit fullrun_mos2_xmm0100640201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Jul  9 05:41:51 2012] Spatial fit model total counts = 669.960000, observed total counts = 618.000000
[Mon Jul  9 05:41:51 2012] Offset between fit and detection position for source 19 = 0.105749 pixels
[Mon Jul  9 05:41:51 2012] 667.911000 total counts/ 243.457000 bgd. counts: snr = 27.203169
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.105749 pixels
  Position = (313.1, 232.8) = 0 42 43.24 85 14 15.7
  Extent = 5.9 (5.3-6.5)" x 4.8 (4.2-5.4)", rotation angle = 2 (343-27) degrees
  Source counts = 424.5 +/- 25.8
  Background counts = 243.5
  Rate = 0.007 +/- 0.0004
[Mon Jul  9 05:41:51 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 05:41:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 05:41:51 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 05:41:51 2012] Source does appear to be extended
[Mon Jul  9 05:41:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Mon Jul  9 06:31:47 2012] XMMSAS src. selection expression = ellipse(27194.852280, 20201.583400, 352.176010, 286.870208, 2.424950, X, Y)
[Mon Jul  9 06:31:47 2012] Writing source region out to fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src19_src.reg
[Mon Jul  9 06:31:47 2012] Extracting stamp from image fullrun_mos2_xmm0100640201_pi300-10000_cl_sm2.00.img.gz, (293, 213) - (333, 253)
[Mon Jul  9 06:31:47 2012] XMMSAS bgd. selection expression = annulus(27194.852280, 20201.583400, 586.960017, 1173.920034, X, Y) && !ellipse(26757.143066, 18894.153000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28935.021118, 18177.611038, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  9 06:31:47 2012] Writing fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src19.gif
[Mon Jul  9 06:33:34 2012] Mean detx,y = (6091.04, -4835.86) 
[Mon Jul  9 06:33:35 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 06:33:49 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 06:33:49 2012] Setting source spectrum file to fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jul  9 06:33:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Jul  9 07:11:54 2012] Updating aperture counts using extracted products
[Mon Jul  9 07:11:54 2012] Error reading totcts from fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jul  9 07:11:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 07:11:55 2012] Using photon index=1.80, rate=0.0073, arf fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src19.arf
[Mon Jul  9 07:11:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 07:11:55 2012] Updating source flux to 1.3e-13
[Mon Jul  9 07:12:46 2012] Flag b found in src. 19 procflags, skipping spectral fitting
[Mon Jul  9 07:13:28 2012] Reading fit data from xmm0100640201/analysis//spectral/fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src19_pl.csv
[Mon Jul  9 07:13:28 2012] Spectral fit parameter nH value = 1.11279e+22
[Mon Jul  9 07:13:28 2012] Spectral fit parameter PhoIndex value = 9.98
[Mon Jul  9 07:13:28 2012] Failed to get F(0.3-8.0) from xmm0100640201/analysis//spectral/fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src19_pl.csv, possibly due to different flux energy range selected
[Mon Jul  9 07:13:28 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 07:13:28 2012] Using Nh = 1.1e+22, photon index=9.98, rate=0.0073, arf fullrun_mos2_xmm0100640201_pi300-10000_pass1_cl_src19.arf
[Mon Jul  9 07:13:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 07:13:28 2012] Updating source flux to 7.3e-14