[Mon Jul  9 00:01:22 2012] Detection parameters:
  Position = (166.0, 287.9) = 0 51 23.57 85 18 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1355.2 +/- 44.2
  Background counts = 15.4
  Rate = 0.02 +/- 0.0008

[Mon Jul  9 00:01:23 2012] Off-axis axis estimate = 9.63'
[Mon Jul  9 00:04:43 2012] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 00:04:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  9 00:04:43 2012] Initial guess for spatial extent in simple fitting = 11.24"
[Mon Jul  9 00:04:43 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.946
[Mon Jul  9 00:04:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.24"
[Mon Jul  9 01:36:17 2012] fullrun_mos1_xmm0100640201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul  9 01:36:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640201_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 01:36:17 2012] fullrun_mos1_xmm0100640201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul  9 01:36:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640201_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 01:36:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100640201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100640201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 01:36:18 2012] fullrun_mos1_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul  9 01:36:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul  9 01:36:18 2012] fullrun_mos1_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul  9 01:36:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul  9 01:36:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100640201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 02:59:02 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.746790 pixels away
[Mon Jul  9 02:59:03 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 02:59:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 02:59:03 2012] Assessing source extent using major
[Mon Jul  9 02:59:03 2012] Source does appear to be extended
[Mon Jul  9 02:59:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 03:01:48 2012] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 03:01:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  9 03:01:48 2012] Initial guess for spatial extent in simple fitting = 11.24"
[Mon Jul  9 03:01:48 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.946
[Mon Jul  9 03:01:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.24"
[Mon Jul  9 04:23:57 2012] fullrun_mos1_xmm0100640201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul  9 04:23:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640201_pi300-10000_cl_pass1_src1.csv
[Mon Jul  9 04:23:57 2012] fullrun_mos1_xmm0100640201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul  9 04:23:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640201_pi300-10000_cl_pass1_src1.csv
[Mon Jul  9 04:23:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100640201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100640201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 04:23:58 2012] fullrun_mos1_xmm0100640201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul  9 04:23:58 2012] fullrun_mos1_xmm0100640201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul  9 04:23:58 2012] Fit fullrun_mos1_xmm0100640201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul  9 05:41:41 2012] Spatial fit model total counts = 1588.230000, observed total counts = 1547.000000
[Mon Jul  9 05:41:41 2012] Offset between fit and detection position for source 1 = 0.207303 pixels
[Mon Jul  9 05:41:41 2012] 1593.509000 total counts/ 557.899000 bgd. counts: snr = 43.844835
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.207303 pixels
  Position = (166.2, 287.7) = 0 51 22.94 85 18 5.2
  Extent = 6.8 (6.4-7.1)", rotation angle = 0
  Source counts = 1035.6 +/- 39.9
  Background counts = 557.9
  Rate = 0.02 +/- 0.0007
[Mon Jul  9 05:41:41 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 05:41:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 05:41:41 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 05:41:41 2012] Source does appear to be extended
[Mon Jul  9 05:41:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 05:43:48 2012] Counts = 1035.610000, rescaling region sizes by 2.000000
[Mon Jul  9 05:43:48 2012] XMMSAS src. selection expression = ellipse(14408.956600, 24985.569200, 813.984023, 813.984023, 0.000000, X, Y)
[Mon Jul  9 05:43:48 2012] Writing source region out to fullrun_mos1_xmm0100640201_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul  9 05:43:48 2012] Extracting stamp from image fullrun_mos1_xmm0100640201_pi300-10000_cl_sm2.00.img.gz, (119, 241) - (213, 335)
[Mon Jul  9 05:43:48 2012] XMMSAS bgd. selection expression = annulus(14408.956600, 24985.569200, 2713.280078, 5426.560156, X, Y) && !ellipse(19428.384420, 21089.738800, 364.561610, 364.561610, 0.000000, X, Y) && !ellipse(10240.292763, 28217.475555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19883.349213, 29796.705566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8528.315933, 31086.927673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16525.982361, 28840.549866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18842.194077, 22253.685028, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  9 05:43:48 2012] Writing fullrun_mos1_xmm0100640201_pi300-10000_pass1_cl_src1.gif
[Mon Jul  9 05:43:52 2012] Mean detx,y = (9040.80, -6212.02) 
[Mon Jul  9 05:43:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 05:44:29 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 05:44:29 2012] Setting source spectrum file to fullrun_mos1_xmm0100640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  9 05:44:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100640201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul  9 07:11:52 2012] Updating aperture counts using extracted products
[Mon Jul  9 07:11:52 2012] Error reading totcts from fullrun_mos1_xmm0100640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  9 07:11:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 07:11:53 2012] Using photon index=1.80, rate=0.0178, arf fullrun_mos1_xmm0100640201_pi300-10000_pass1_cl_src1.arf
[Mon Jul  9 07:11:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 07:11:53 2012] Updating source flux to 3.4e-13
[Mon Jul  9 07:12:46 2012] Reading fit data from xmm0100640201/analysis//spectral/fullrun_mos1_xmm0100640201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul  9 07:12:46 2012] Spectral fit parameter nH value = 1.89021e+21
[Mon Jul  9 07:12:46 2012] Spectral fit parameter PhoIndex value = 2.82042
[Mon Jul  9 07:12:46 2012] Failed to get F(0.3-8.0) from xmm0100640201/analysis//spectral/fullrun_mos1_xmm0100640201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul  9 07:12:46 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 07:12:46 2012] Using Nh = 1.9e+21, photon index=2.82, rate=0.0178, arf fullrun_mos1_xmm0100640201_pi300-10000_pass1_cl_src1.arf
[Mon Jul  9 07:12:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 07:12:46 2012] Updating source flux to 2.6e-13