[Thu Jun 14 02:25:14 2012] Detection parameters:
  Position = (253.9, 239.3) = 0 46 11.94 85 14 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.1 +/- 12.4
  Background counts = 23.0
  Rate = 0.002 +/- 0.0004

[Thu Jun 14 02:25:14 2012] Off-axis axis estimate = 5.37'
[Thu Jun 14 04:32:22 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 04:32:22 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Thu Jun 14 04:32:22 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.928
[Thu Jun 14 04:32:22 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 9.11"
[Thu Jun 14 05:27:45 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src20.ximg exists
[Thu Jun 14 05:27:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src20.csv
[Thu Jun 14 05:27:45 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Jun 14 05:27:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src20.csv
[Thu Jun 14 05:27:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Jun 14 05:27:46 2012] Fit fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Jun 14 05:28:06 2012] Spatial fit model total counts = 256.049000, observed total counts = 253.000000
[Thu Jun 14 05:28:06 2012] Offset between fit and detection position for source 44 = 1.479417 pixels
[Thu Jun 14 05:28:06 2012] 254.961300 total counts/ 68.605300 bgd. counts: snr = 22.499069
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 1.479417 pixels
  Position = (252.4, 239.1) = 0 46 17.01 85 14 41.3
  Extent = 18.2 (18.2-36.4)", rotation angle = 0
  Source counts = 186.4 +/- 16.0
  Background counts = 68.6
  Rate = 0.004 +/- 0.0004
[Thu Jun 14 05:28:06 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 05:28:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 05:28:06 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 05:28:06 2012] Source does appear to be extended
[Thu Jun 14 05:28:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 05:28:06 2012] Source is confused with source 45
[Thu Jun 14 07:12:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 07:12:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 07:12:10 2012] Initial guess for spatial extent in simple fitting = 18.22"
[Thu Jun 14 07:12:10 2012] source mask rpix=4.2, npix_max = 87, mask sum = 90, frac = 1.023
[Thu Jun 14 07:12:10 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 18.22"
[Thu Jun 14 07:59:59 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src20.ximg exists
[Thu Jun 14 07:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src20.csv
[Thu Jun 14 07:59:59 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Jun 14 07:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src20.csv
[Thu Jun 14 07:59:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 08:00:00 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Jun 14 08:00:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jun 14 08:00:00 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Jun 14 08:00:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jun 14 08:00:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 08:00:21 2012] Warning, spatial fit 20 centroid is now closest to src. 42
[Thu Jun 14 08:00:21 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 08:00:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 08:00:21 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 08:00:21 2012] Source does appear to be extended
[Thu Jun 14 08:00:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 09:15:01 2012] XMMSAS src. selection expression = ellipse(21912.640200, 20749.487400, 1093.362031, 1093.362031, 0.000000, X, Y)
[Thu Jun 14 09:15:01 2012] Writing source region out to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src44_src.reg
[Thu Jun 14 09:15:01 2012] Extracting stamp from image fullrun_mos2_xmm0100640101_pi300-10000_cl_sm2.00.img.gz, (190, 176) - (315, 302)
[Thu Jun 14 09:15:01 2012] XMMSAS bgd. selection expression = annulus(21912.640200, 20749.487400, 1822.270052, 3644.540105, X, Y) && !ellipse(19413.472748, 21012.530518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21260.662600, 20616.115200, 537.813615, 537.813615, 0.000000, X, Y) && !ellipse(18780.933200, 22237.292600, 682.255220, 682.255220, 0.000000, X, Y) && !ellipse(23626.309480, 21591.964000, 306.648009, 306.648009, 0.000000, X, Y)
[Thu Jun 14 09:15:01 2012] Writing fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src44.gif
[Thu Jun 14 09:19:53 2012] Mean detx,y = (7577.44, 314.56) 
[Thu Jun 14 09:19:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 09:20:15 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 09:20:15 2012] Setting source spectrum file to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Thu Jun 14 09:20:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Thu Jun 14 09:46:58 2012] Updating aperture counts using extracted products
[Thu Jun 14 09:46:58 2012] Error reading totcts from fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Thu Jun 14 09:46:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 09:46:58 2012] Using photon index=1.80, rate=0.00449, arf fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src44.arf
[Thu Jun 14 09:46:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 09:46:58 2012] Updating source flux to 6.5e-14
[Thu Jun 14 09:47:09 2012] Flag c found in src. 44 procflags, skipping spectral fitting