[Thu Jun 14 02:25:14 2012] Detection parameters:
  Position = (342.7, 297.9) = 0 40 58.84 85 18 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.2 +/- 11.5
  Background counts = 25.2
  Rate = 0.002 +/- 0.0003

[Thu Jun 14 02:25:14 2012] Off-axis axis estimate = 3.21'
[Thu Jun 14 04:32:22 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 04:32:22 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Thu Jun 14 04:32:22 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908
[Thu Jun 14 04:32:22 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.03"
[Thu Jun 14 05:27:45 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src35.ximg exists
[Thu Jun 14 05:27:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src35.csv
[Thu Jun 14 05:27:45 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src35_1.ximg exists
[Thu Jun 14 05:27:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src35.csv
[Thu Jun 14 05:27:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Thu Jun 14 05:27:46 2012] Fit fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Thu Jun 14 05:28:06 2012] Spatial fit model total counts = 229.818000, observed total counts = 214.000000
[Thu Jun 14 05:28:06 2012] Offset between fit and detection position for source 39 = 0.242270 pixels
[Thu Jun 14 05:28:06 2012] 231.564000 total counts/ 197.300000 bgd. counts: snr = 2.439352
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.242270 pixels
  Position = (342.6, 297.7) = 0 40 59.35 85 18 56.7
  Extent = 3.7 (2.7-5.7)", rotation angle = 0
  Source counts = 34.3 +/- 15.2
  Background counts = 197.3
  Rate = 0.0008 +/- 0.0004
[Thu Jun 14 05:28:06 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 05:28:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 05:28:06 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 05:28:06 2012] Source does appear to be extended
[Thu Jun 14 05:28:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 07:12:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 07:12:10 2012] Initial guess for spatial extent in simple fitting = 3.68"
[Thu Jun 14 07:12:10 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.241
[Thu Jun 14 07:12:10 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 3.68"
[Thu Jun 14 07:59:59 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src35.ximg exists
[Thu Jun 14 07:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src35.csv
[Thu Jun 14 07:59:59 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu Jun 14 07:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src35.csv
[Thu Jun 14 07:59:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 08:00:00 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu Jun 14 08:00:00 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu Jun 14 08:00:00 2012] Fit fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Thu Jun 14 08:00:21 2012] Spatial fit model total counts = 227.418000, observed total counts = 214.000000
[Thu Jun 14 08:00:21 2012] Offset between fit and detection position for source 39 = 0.041366 pixels
[Thu Jun 14 08:00:21 2012] 228.626100 total counts/ 194.293000 bgd. counts: snr = 2.463114
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.041366 pixels
  Position = (342.6, 297.8) = 0 40 59.33 85 18 56.9
  Extent = 3.8 (2.7-5.7)", rotation angle = 0
  Source counts = 34.3 +/- 15.1
  Background counts = 194.3
  Rate = 0.0008 +/- 0.0004
[Thu Jun 14 08:00:21 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 08:00:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 08:00:21 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 08:00:21 2012] Source does appear to be extended
[Thu Jun 14 08:00:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 09:15:01 2012] XMMSAS src. selection expression = ellipse(29754.813600, 25858.990800, 228.558007, 228.558007, 0.000000, X, Y)
[Thu Jun 14 09:15:01 2012] Writing source region out to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src39_src.reg
[Thu Jun 14 09:15:01 2012] Extracting stamp from image fullrun_mos2_xmm0100640101_pi300-10000_cl_sm2.00.img.gz, (329, 285) - (356, 311)
[Thu Jun 14 09:15:01 2012] XMMSAS bgd. selection expression = annulus(29754.813600, 25858.990800, 380.930011, 761.860022, X, Y) && !ellipse(28922.262782, 24969.123800, 298.308809, 298.308809, 0.000000, X, Y)
[Thu Jun 14 09:15:01 2012] Writing fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src39.gif
[Thu Jun 14 09:23:23 2012] Mean detx,y = (-117.78, -5236.78) 
[Thu Jun 14 09:23:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 09:23:28 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 09:23:28 2012] Setting source spectrum file to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Jun 14 09:23:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu Jun 14 09:41:38 2012] Not generating rmf since there are only 34 counts
[Thu Jun 14 09:41:38 2012] rmf not generated due to insufficient counts
[Thu Jun 14 09:46:58 2012] Updating aperture counts using extracted products
[Thu Jun 14 09:46:58 2012] Error reading totcts from fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Jun 14 09:46:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 09:46:58 2012] Using photon index=1.80, rate=0.000828, arf fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src39.arf
[Thu Jun 14 09:46:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 09:46:58 2012] Updating source flux to 1.2e-14
[Thu Jun 14 09:47:09 2012] Source 39 has fewer than 100.000000 counts, skipping spectral fitting