[Thu Jun 14 02:25:14 2012] Detection parameters:
  Position = (275.5, 303.0) = 0 44 57.44 85 19 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.5 +/- 11.7
  Background counts = 24.5
  Rate = 0.002 +/- 0.0003

[Thu Jun 14 02:25:14 2012] Off-axis axis estimate = 1.69'
[Thu Jun 14 04:32:22 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 04:32:22 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Jun 14 04:32:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 18, frac = 0.954
[Thu Jun 14 04:32:22 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.27"
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src37.ximg exists
[Thu Jun 14 05:27:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src37.csv
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu Jun 14 05:27:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src37.csv
[Thu Jun 14 05:27:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu Jun 14 05:27:46 2012] Fit fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Thu Jun 14 05:28:06 2012] Source 38 is offset by 7.234644 and 6.668940 pixels which is larger than
2 X fitted extent = 6.689242 x 6.689242, not incorporating fit results
[Thu Jun 14 05:28:06 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 05:28:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 05:28:06 2012] Assessing source extent using major
[Thu Jun 14 05:28:06 2012] Source does appear to be extended
[Thu Jun 14 05:28:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 07:12:10 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 07:12:10 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Jun 14 07:12:10 2012] source mask rpix=1.7, npix_max = 18, mask sum = 18, frac = 0.954
[Thu Jun 14 07:12:10 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 7.27"
[Thu Jun 14 07:59:59 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src37.ximg exists
[Thu Jun 14 07:59:59 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu Jun 14 07:59:59 2012] Fit fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src37 appears to have run properly
[Thu Jun 14 08:00:00 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu Jun 14 08:00:00 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu Jun 14 08:00:00 2012] Fit fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Thu Jun 14 08:00:21 2012] Source 38 is offset by 7.234644 and 6.668940 pixels which is larger than
2 X fitted extent = 6.689242 x 6.689242, not incorporating fit results
[Thu Jun 14 08:00:21 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 08:00:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 08:00:21 2012] Assessing source extent using major
[Thu Jun 14 08:00:21 2012] Source does appear to be extended
[Thu Jun 14 08:00:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 09:15:01 2012] XMMSAS src. selection expression = ellipse(23923.948029, 26310.731750, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 09:15:01 2012] Writing source region out to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src38_src.reg
[Thu Jun 14 09:15:01 2012] Extracting stamp from image fullrun_mos2_xmm0100640101_pi300-10000_cl_sm2.00.img.gz, (238, 265) - (313, 340)
[Thu Jun 14 09:15:01 2012] XMMSAS bgd. selection expression = annulus(23923.948029, 26310.731750, 1087.500000, 2175.000000, X, Y)
[Thu Jun 14 09:15:01 2012] Writing fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src38.gif
[Thu Jun 14 09:23:40 2012] Mean detx,y = (1487.60, 356.90) 
[Thu Jun 14 09:23:41 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 09:23:46 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 09:23:46 2012] Setting source spectrum file to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Jun 14 09:23:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Thu Jun 14 09:41:45 2012] Not generating rmf since there are only 62 counts
[Thu Jun 14 09:41:45 2012] rmf not generated due to insufficient counts
[Thu Jun 14 09:46:58 2012] Updating aperture counts using extracted products
[Thu Jun 14 09:46:58 2012] Error reading totcts from fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Jun 14 09:46:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 09:46:58 2012] Using photon index=1.80, rate=0.00154, arf fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src38.arf
[Thu Jun 14 09:46:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 09:46:58 2012] Updating source flux to 1.6e-14
[Thu Jun 14 09:47:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting