[Thu Jun 14 02:25:13 2012] Detection parameters:
  Position = (227.8, 414.5) = 0 47 54.72 85 27 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.3 +/- 11.3
  Background counts = 24.9
  Rate = 0.002 +/- 0.0005

[Thu Jun 14 02:25:14 2012] Off-axis axis estimate = 9.85'
[Thu Jun 14 04:32:22 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 04:32:22 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Thu Jun 14 04:32:22 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.086
[Thu Jun 14 04:32:22 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 11.35"
[Thu Jun 14 05:27:45 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src30.ximg exists
[Thu Jun 14 05:27:45 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Jun 14 05:27:45 2012] Fit fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src30 appears to have run properly
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Jun 14 05:27:46 2012] Fit fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Thu Jun 14 05:28:06 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 14.970965 pixels away
[Thu Jun 14 05:28:06 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 05:28:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 05:28:06 2012] Assessing source extent using major
[Thu Jun 14 05:28:06 2012] Source does appear to be extended
[Thu Jun 14 05:28:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 07:12:10 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 07:12:10 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Thu Jun 14 07:12:10 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.086
[Thu Jun 14 07:12:10 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 11.35"
[Thu Jun 14 07:59:59 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src30.ximg exists
[Thu Jun 14 07:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src30.csv
[Thu Jun 14 07:59:59 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src30_1.ximg exists
[Thu Jun 14 07:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src30.csv
[Thu Jun 14 07:59:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 08:00:00 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Thu Jun 14 08:00:00 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Thu Jun 14 08:00:00 2012] Fit fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Thu Jun 14 08:00:21 2012] Source 26 is offset by -9.659886 and -1.494901 pixels which is larger than
2 X fitted extent = 1.304979 x 1.304979, not incorporating fit results
[Thu Jun 14 08:00:21 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 08:00:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 08:00:21 2012] Assessing source extent using major
[Thu Jun 14 08:00:21 2012] Source does appear to be extended
[Thu Jun 14 08:00:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 09:15:01 2012] XMMSAS src. selection expression = ellipse(19768.355911, 36010.570648, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 09:15:01 2012] Writing source region out to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src26_src.reg
[Thu Jun 14 09:15:01 2012] Extracting stamp from image fullrun_mos2_xmm0100640101_pi300-10000_cl_sm2.00.img.gz, (190, 377) - (265, 452)
[Thu Jun 14 09:15:01 2012] XMMSAS bgd. selection expression = annulus(19768.355911, 36010.570648, 1087.500000, 2175.000000, X, Y) && !ellipse(23122.230000, 39211.570000, 1972.136057, 1972.136057, 0.000000, X, Y)
[Thu Jun 14 09:15:01 2012] Writing fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src26.gif
[Thu Jun 14 09:22:09 2012] Mean detx,y = (-6109.64, 7666.67) 
[Thu Jun 14 09:22:09 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 09:22:19 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 09:22:19 2012] Setting source spectrum file to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Jun 14 09:22:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Jun 14 09:38:00 2012] Not generating rmf since there are only 43 counts
[Thu Jun 14 09:38:00 2012] rmf not generated due to insufficient counts
[Thu Jun 14 09:46:58 2012] Updating aperture counts using extracted products
[Thu Jun 14 09:46:58 2012] Error reading totcts from fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Jun 14 09:46:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 09:46:58 2012] Using photon index=1.80, rate=0.0018, arf fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src26.arf
[Thu Jun 14 09:46:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 09:46:58 2012] Updating source flux to 3.2e-14
[Thu Jun 14 09:47:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting