[Thu Jun 14 02:25:13 2012] Detection parameters:
  Position = (256.3, 466.9) = 0 46 12.29 85 31 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.6 +/- 13.6
  Background counts = 22.8
  Rate = 0.002 +/- 0.0003

[Thu Jun 14 02:25:14 2012] Off-axis axis estimate = 12.59'
[Thu Jun 14 04:32:22 2012] Using EEF radius (= 12.72 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 04:32:22 2012] Initial guess for spatial extent in simple fitting = 12.72"
[Thu Jun 14 04:32:22 2012] source mask rpix=2.9, npix_max = 46, mask sum = 47, frac = 1.002
[Thu Jun 14 04:32:22 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 12.72"
[Thu Jun 14 05:27:45 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src26.ximg exists
[Thu Jun 14 05:27:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src26.csv
[Thu Jun 14 05:27:45 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Jun 14 05:27:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src26.csv
[Thu Jun 14 05:27:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Jun 14 05:27:46 2012] Fit fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Thu Jun 14 05:28:06 2012] Warning, spatial fit 26 centroid is now closest to src. 21
[Thu Jun 14 05:28:06 2012] Spatial fit model total counts = 294.193000, observed total counts = 272.000000
[Thu Jun 14 05:28:06 2012] Offset between fit and detection position for source 2 = 2.043197 pixels
[Thu Jun 14 05:28:06 2012] Warning, changing simple spatial fit ID from 26 to 46
[Thu Jun 14 05:28:06 2012] 295.522000 total counts/ 260.843000 bgd. counts: snr = 2.147222
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.043197 pixels
  Position = (255.7, 468.8) = 0 46 14.99 85 31 20.8
  Extent = 17.2 (12.8-24.7)" x 6.3 (3.8-11.2)", rotation angle = 108 (98-136) degrees
  Source counts = 34.7 +/- 17.2
  Background counts = 260.8
  Rate = 0.0008 +/- 0.0004
[Thu Jun 14 05:28:06 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 05:28:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 05:28:06 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 05:28:06 2012] Source does appear to be extended
[Thu Jun 14 05:28:06 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Thu Jun 14 07:12:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 07:12:10 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Thu Jun 14 07:12:10 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.028
[Thu Jun 14 07:12:10 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 11.73"
[Thu Jun 14 07:59:59 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src26.ximg exists
[Thu Jun 14 07:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src26.csv
[Thu Jun 14 07:59:59 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu Jun 14 07:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src26.csv
[Thu Jun 14 07:59:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 08:00:00 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu Jun 14 08:00:00 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Jun 14 08:00:00 2012] Fit fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Thu Jun 14 08:00:21 2012] Warning, spatial fit 26 centroid is now closest to src. 21
[Thu Jun 14 08:00:21 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 08:00:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 08:00:21 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 08:00:21 2012] Source does appear to be extended
[Thu Jun 14 08:00:21 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Thu Jun 14 09:15:01 2012] XMMSAS src. selection expression = ellipse(22193.070000, 40736.648000, 1029.018030, 378.651611, 108.060000, X, Y)
[Thu Jun 14 09:15:01 2012] Writing source region out to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 14 09:15:01 2012] Extracting stamp from image fullrun_mos2_xmm0100640101_pi300-10000_cl_sm2.00.img.gz, (197, 410) - (315, 528)
[Thu Jun 14 09:15:01 2012] XMMSAS bgd. selection expression = annulus(22193.070000, 40736.648000, 1715.030049, 3430.060099, X, Y) && !ellipse(21202.227400, 39844.108600, 318.216009, 318.216009, 0.000000, X, Y) && !ellipse(24220.599762, 41687.230377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23122.230000, 39211.570000, 1972.136057, 1972.136057, 0.000000, X, Y)
[Thu Jun 14 09:15:01 2012] Writing fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src2.gif
[Thu Jun 14 09:21:22 2012] Mean detx,y = (-11336.21, 7126.61) 
[Thu Jun 14 09:21:22 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 09:21:39 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 09:21:39 2012] Setting source spectrum file to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 14 09:21:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 14 09:37:39 2012] Not generating rmf since there are only 34 counts
[Thu Jun 14 09:37:39 2012] rmf not generated due to insufficient counts
[Thu Jun 14 09:46:58 2012] Updating aperture counts using extracted products
[Thu Jun 14 09:46:58 2012] Error reading totcts from fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 14 09:46:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 09:46:58 2012] Using photon index=1.80, rate=0.000836, arf fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src2.arf
[Thu Jun 14 09:46:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 09:46:58 2012] Updating source flux to 2e-14
[Thu Jun 14 09:47:09 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting