[Thu Jun 14 02:25:13 2012] Detection parameters:
  Position = (335.0, 265.3) = 0 41 27.20 85 16 36.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.9 +/- 20.1
  Background counts = 25.1
  Rate = 0.007 +/- 0.0006

[Thu Jun 14 02:25:14 2012] Off-axis axis estimate = 3.58'
[Thu Jun 14 04:32:22 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 04:32:22 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Thu Jun 14 04:32:22 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.876
[Thu Jun 14 04:32:22 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.22"
[Thu Jun 14 05:27:45 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jun 14 05:27:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src5.csv
[Thu Jun 14 05:27:45 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jun 14 05:27:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src5.csv
[Thu Jun 14 05:27:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jun 14 05:27:46 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jun 14 05:27:46 2012] Fit fullrun_mos2_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jun 14 05:28:06 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.194169 pixels away
[Thu Jun 14 05:28:06 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 05:28:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 05:28:06 2012] Assessing source extent using major
[Thu Jun 14 05:28:06 2012] Source does appear to be extended
[Thu Jun 14 05:28:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 07:12:10 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 07:12:10 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Thu Jun 14 07:12:10 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.876
[Thu Jun 14 07:12:10 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.22"
[Thu Jun 14 07:59:59 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jun 14 07:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src5.csv
[Thu Jun 14 07:59:59 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jun 14 07:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src5.csv
[Thu Jun 14 07:59:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 08:00:00 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jun 14 08:00:00 2012] fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jun 14 08:00:00 2012] Fit fullrun_mos2_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jun 14 08:00:21 2012] Spatial fit model total counts = 363.968000, observed total counts = 364.000000
[Thu Jun 14 08:00:21 2012] Offset between fit and detection position for source 15 = 0.121950 pixels
[Thu Jun 14 08:00:21 2012] 361.771000 total counts/ 194.723000 bgd. counts: snr = 11.971061
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.121950 pixels
  Position = (335.1, 265.4) = 0 41 26.94 85 16 36.2
  Extent = 5.5 (4.7-6.4)", rotation angle = 0
  Source counts = 167.0 +/- 19.0
  Background counts = 194.7
  Rate = 0.004 +/- 0.0005
[Thu Jun 14 08:00:21 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 08:00:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 08:00:21 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 08:00:21 2012] Source does appear to be extended
[Thu Jun 14 08:00:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 09:15:01 2012] XMMSAS src. selection expression = ellipse(29104.931260, 23039.131600, 332.112010, 332.112010, 0.000000, X, Y)
[Thu Jun 14 09:15:01 2012] Writing source region out to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src15_src.reg
[Thu Jun 14 09:15:01 2012] Extracting stamp from image fullrun_mos2_xmm0100640101_pi300-10000_cl_sm2.00.img.gz, (316, 246) - (354, 284)
[Thu Jun 14 09:15:01 2012] XMMSAS bgd. selection expression = annulus(29104.931260, 23039.131600, 553.520016, 1107.040032, X, Y)
[Thu Jun 14 09:15:01 2012] Writing fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src15.gif
[Thu Jun 14 09:17:11 2012] Mean detx,y = (2759.68, -5631.03) 
[Thu Jun 14 09:17:11 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 09:17:17 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 09:17:17 2012] Setting source spectrum file to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Jun 14 09:17:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu Jun 14 09:46:57 2012] Updating aperture counts using extracted products
[Thu Jun 14 09:46:57 2012] Error reading totcts from fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Jun 14 09:46:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 09:46:58 2012] Using photon index=1.80, rate=0.00403, arf fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src15.arf
[Thu Jun 14 09:46:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 09:46:58 2012] Updating source flux to 6.2e-14
[Thu Jun 14 09:47:41 2012] Reading fit data from xmm0100640101/analysis//spectral/fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src15_pl.csv
[Thu Jun 14 09:47:41 2012] Spectral fit parameter nH value = 1.18854e+14
[Thu Jun 14 09:47:41 2012] Spectral fit parameter PhoIndex value = 2.45576
[Thu Jun 14 09:47:41 2012] Failed to get F(0.3-8.0) from xmm0100640101/analysis//spectral/fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src15_pl.csv, possibly due to different flux energy range selected
[Thu Jun 14 09:47:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 09:47:41 2012] Using Nh = 1.2e+14, photon index=2.46, rate=0.00403, arf fullrun_mos2_xmm0100640101_pi300-10000_pass1_cl_src15.arf
[Thu Jun 14 09:47:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 09:47:41 2012] Updating source flux to 5e-14