[Thu Jun 14 02:24:43 2012] Detection parameters:
  Position = (308.4, 217.7) = 0 43 1.46 85 13 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.9 +/- 13.4
  Background counts = 22.8
  Rate = 0.004 +/- 0.0005

[Thu Jun 14 02:24:43 2012] Off-axis axis estimate = 5.90'
[Thu Jun 14 03:40:37 2012] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 03:40:37 2012] Initial guess for spatial extent in simple fitting = 9.38"
[Thu Jun 14 03:40:37 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.886
[Thu Jun 14 03:40:37 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.38"
[Thu Jun 14 04:32:21 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src13.ximg exists
[Thu Jun 14 04:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src13.csv
[Thu Jun 14 04:32:21 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Jun 14 04:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src13.csv
[Thu Jun 14 04:32:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 04:32:22 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Jun 14 04:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jun 14 04:32:22 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Jun 14 04:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jun 14 04:32:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 05:28:00 2012] Source 40 is offset by 5.084659 and -6.633191 pixels which is larger than
2 X fitted extent = 1.213821 x 1.213821, not incorporating fit results
[Thu Jun 14 05:28:00 2012] Source 40 is offset by 4.437970 and -7.853282 pixels which is larger than
2 X fitted extent = 5.067127 x 5.067127, not incorporating fit results
[Thu Jun 14 05:28:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 05:28:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 05:28:00 2012] Assessing source extent using major
[Thu Jun 14 05:28:00 2012] Source does appear to be extended
[Thu Jun 14 05:28:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 06:26:23 2012] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 06:26:23 2012] Initial guess for spatial extent in simple fitting = 9.38"
[Thu Jun 14 06:26:23 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.886
[Thu Jun 14 06:26:23 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.38"
[Thu Jun 14 07:12:09 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src13.ximg exists
[Thu Jun 14 07:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src13.csv
[Thu Jun 14 07:12:09 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Jun 14 07:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src13.csv
[Thu Jun 14 07:12:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 07:12:10 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Jun 14 07:12:10 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jun 14 07:12:10 2012] Fit fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Jun 14 08:00:15 2012] Spatial fit model total counts = 272.189000, observed total counts = 266.000000
[Thu Jun 14 08:00:15 2012] Offset between fit and detection position for source 40 = 0.133825 pixels
[Thu Jun 14 08:00:15 2012] 275.676200 total counts/ 219.577000 bgd. counts: snr = 3.785849
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.133825 pixels
  Position = (308.3, 217.5) = 0 43 1.74 85 13 8.9
  Extent = 5.1 (3.5-7.4)", rotation angle = 0
  Source counts = 56.1 +/- 16.6
  Background counts = 219.6
  Rate = 0.001 +/- 0.0004
[Thu Jun 14 08:00:16 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 08:00:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 08:00:16 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 08:00:16 2012] Source does appear to be extended
[Thu Jun 14 08:00:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 08:57:37 2012] XMMSAS src. selection expression = ellipse(26773.488400, 18877.971600, 308.982609, 308.982609, 0.000000, X, Y)
[Thu Jun 14 08:57:37 2012] Writing source region out to fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src40_src.reg
[Thu Jun 14 08:57:37 2012] Extracting stamp from image fullrun_mos1_xmm0100640101_pi300-10000_cl_sm2.00.img.gz, (291, 200) - (326, 235)
[Thu Jun 14 08:57:37 2012] XMMSAS bgd. selection expression = annulus(26773.488400, 18877.971600, 514.971015, 1029.942030, X, Y) && !ellipse(27219.811127, 20215.950043, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 08:57:37 2012] Writing fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src40.gif
[Thu Jun 14 09:00:27 2012] Mean detx,y = (-4654.18, -7673.45) 
[Thu Jun 14 09:00:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 09:00:33 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 09:00:33 2012] Setting source spectrum file to fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Jun 14 09:00:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Thu Jun 14 09:12:56 2012] Not generating rmf since there are only 56 counts
[Thu Jun 14 09:12:56 2012] rmf not generated due to insufficient counts
[Thu Jun 14 09:46:57 2012] Updating aperture counts using extracted products
[Thu Jun 14 09:46:57 2012] Error reading totcts from fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Jun 14 09:46:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 09:46:57 2012] Using photon index=1.80, rate=0.00136, arf fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src40.arf
[Thu Jun 14 09:46:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 09:46:57 2012] Updating source flux to 3e-14
[Thu Jun 14 09:47:00 2012] Flag b found in src. 40 procflags, skipping spectral fitting
[Thu Jun 14 09:47:00 2012] Source 40 has fewer than 100.000000 counts, skipping spectral fitting