[Thu Jun 14 02:24:43 2012] Detection parameters:
  Position = (313.4, 232.9) = 0 42 43.67 85 14 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 365.4 +/- 23.5
  Background counts = 23.0
  Rate = 0.01 +/- 0.0009

[Thu Jun 14 02:24:43 2012] Off-axis axis estimate = 4.87'
[Thu Jun 14 03:40:37 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 03:40:37 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Thu Jun 14 03:40:37 2012] source mask rpix=2.0, npix_max = 25, mask sum = 22, frac = 0.854
[Thu Jun 14 03:40:37 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.86"
[Thu Jun 14 04:32:21 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 14 04:32:21 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 14 04:32:21 2012] Fit fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src3 appears to have run properly
[Thu Jun 14 04:32:22 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 14 04:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 14 04:32:22 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 14 04:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 14 04:32:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 05:28:00 2012] Warning, spatial fit 3 centroid is now closest to src. 40
[Thu Jun 14 05:28:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 05:28:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 05:28:00 2012] Assessing source extent using major
[Thu Jun 14 05:28:00 2012] Source does appear to be extended
[Thu Jun 14 05:28:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 06:26:23 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 06:26:23 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Thu Jun 14 06:26:23 2012] source mask rpix=2.0, npix_max = 25, mask sum = 22, frac = 0.854
[Thu Jun 14 06:26:23 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.86"
[Thu Jun 14 07:12:09 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 14 07:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 14 07:12:09 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 14 07:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 14 07:12:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 07:12:09 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 14 07:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun 14 07:12:09 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 14 07:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun 14 07:12:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 08:00:15 2012] Spatial fit model total counts = 498.319000, observed total counts = 438.000000
[Thu Jun 14 08:00:15 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 14 08:00:16 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 08:00:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 08:00:16 2012] Assessing source extent using major
[Thu Jun 14 08:00:16 2012] Source does appear to be extended
[Thu Jun 14 08:00:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 08:57:37 2012] XMMSAS src. selection expression = ellipse(27219.811127, 20215.950043, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 08:57:37 2012] Writing source region out to fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src12_src.reg
[Thu Jun 14 08:57:37 2012] Extracting stamp from image fullrun_mos1_xmm0100640101_pi300-10000_cl_sm2.00.img.gz, (276, 195) - (351, 270)
[Thu Jun 14 08:57:37 2012] XMMSAS bgd. selection expression = annulus(27219.811127, 20215.950043, 1087.500000, 2175.000000, X, Y) && !ellipse(29093.526367, 23040.046295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26773.488400, 18877.971600, 411.976812, 411.976812, 0.000000, X, Y)
[Thu Jun 14 08:57:37 2012] Writing fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src12.gif
[Thu Jun 14 08:58:18 2012] Mean detx,y = (-4612.12, -6237.40) 
[Thu Jun 14 08:58:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 08:58:34 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 08:58:34 2012] Setting source spectrum file to fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 14 08:58:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jun 14 09:08:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 14 09:08:51 2012] rmf not generated due to insufficient counts
[Thu Jun 14 09:46:57 2012] Updating aperture counts using extracted products
[Thu Jun 14 09:46:57 2012] Error reading totcts from fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 14 09:46:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 09:46:57 2012] Using photon index=1.80, rate=0.0138, arf fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src12.arf
[Thu Jun 14 09:46:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 09:46:57 2012] Updating source flux to 2.2e-13
[Thu Jun 14 09:47:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting