[Thu Jun 14 02:24:42 2012] Detection parameters:
  Position = (166.4, 287.8) = 0 51 23.53 85 18 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1201.5 +/- 41.4
  Background counts = 21.2
  Rate = 0.03 +/- 0.001

[Thu Jun 14 02:24:43 2012] Off-axis axis estimate = 9.60'
[Thu Jun 14 03:40:37 2012] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 03:40:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 03:40:37 2012] Initial guess for spatial extent in simple fitting = 11.23"
[Thu Jun 14 03:40:37 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Thu Jun 14 03:40:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.23"
[Thu Jun 14 04:32:21 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 14 04:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 04:32:21 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 14 04:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 04:32:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 04:32:22 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 14 04:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 14 04:32:22 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 14 04:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 14 04:32:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100640101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 05:28:00 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.208571 pixels away
[Thu Jun 14 05:28:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 05:28:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 05:28:00 2012] Assessing source extent using major
[Thu Jun 14 05:28:00 2012] Source does appear to be extended
[Thu Jun 14 05:28:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 06:26:23 2012] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 06:26:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 06:26:23 2012] Initial guess for spatial extent in simple fitting = 11.23"
[Thu Jun 14 06:26:23 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Thu Jun 14 06:26:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.23"
[Thu Jun 14 07:12:09 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 14 07:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 07:12:09 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 14 07:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 07:12:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 07:12:09 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 14 07:12:09 2012] fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 14 07:12:09 2012] Fit fullrun_mos1_xmm0100640101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 14 08:00:15 2012] Spatial fit model total counts = 1511.580000, observed total counts = 1461.000000
[Thu Jun 14 08:00:15 2012] Offset between fit and detection position for source 1 = 0.227444 pixels
[Thu Jun 14 08:00:15 2012] 1513.068000 total counts/ 569.230000 bgd. counts: snr = 39.559753
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.227444 pixels
  Position = (166.6, 287.7) = 0 51 22.85 85 18 4.5
  Extent = 7.1 (6.7-7.6)", rotation angle = 0
  Source counts = 943.8 +/- 38.9
  Background counts = 569.2
  Rate = 0.02 +/- 0.0009
[Thu Jun 14 08:00:16 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 08:00:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 08:00:16 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 08:00:16 2012] Source does appear to be extended
[Thu Jun 14 08:00:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 08:57:36 2012] XMMSAS src. selection expression = ellipse(14446.090740, 24982.966600, 423.203412, 423.203412, 0.000000, X, Y)
[Thu Jun 14 08:57:36 2012] Writing source region out to fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 14 08:57:36 2012] Extracting stamp from image fullrun_mos1_xmm0100640101_pi300-10000_cl_sm2.00.img.gz, (142, 263) - (191, 312)
[Thu Jun 14 08:57:36 2012] XMMSAS bgd. selection expression = annulus(14446.090740, 24982.966600, 705.339020, 1410.678041, X, Y)
[Thu Jun 14 08:57:36 2012] Writing fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src1.gif
[Thu Jun 14 08:57:40 2012] Mean detx,y = (9021.92, -6228.15) 
[Thu Jun 14 08:57:41 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 08:57:55 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 08:57:55 2012] Setting source spectrum file to fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 08:57:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 14 09:46:57 2012] Updating aperture counts using extracted products
[Thu Jun 14 09:46:57 2012] Error reading totcts from fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 09:46:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 09:46:57 2012] Using photon index=1.80, rate=0.0228, arf fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 09:46:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 09:46:57 2012] Updating source flux to 5.1e-13
[Thu Jun 14 09:47:09 2012] Reading fit data from xmm0100640101/analysis//spectral/fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 14 09:47:09 2012] Spectral fit parameter nH value = 1.50944e+21
[Thu Jun 14 09:47:09 2012] Spectral fit parameter PhoIndex value = 2.563
[Thu Jun 14 09:47:09 2012] Failed to get F(0.3-8.0) from xmm0100640101/analysis//spectral/fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 14 09:47:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 09:47:09 2012] Using Nh = 1.5e+21, photon index=2.56, rate=0.0228, arf fullrun_mos1_xmm0100640101_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 09:47:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 09:47:09 2012] Updating source flux to 4.2e-13