[Sat Jun 15 04:41:40 2013] Detection parameters:
  Position = (166.1, 358.6) = 22 29 3.27 -5 13 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.3 +/- 19.1
  Background counts = 37.0
  Rate = 0.003 +/- 0.0004

[Sat Jun 15 04:41:42 2013] Off-axis axis estimate = 10.54'
[Sat Jun 15 04:44:59 2013] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:44:59 2013] Initial guess for spatial extent in simple fitting = 11.70"
[Sat Jun 15 04:44:59 2013] source mask rpix=2.7, npix_max = 40, mask sum = 21, frac = 0.516
[Sat Jun 15 04:44:59 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 11.70"
[Sat Jun 15 06:49:51 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun 15 06:49:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src6.csv
[Sat Jun 15 06:49:51 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun 15 06:49:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src6.csv
[Sat Jun 15 06:49:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 06:49:52 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun 15 06:49:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 15 06:49:52 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun 15 06:49:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 15 06:49:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:54:19 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.379518 pixels away
[Sat Jun 15 08:54:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:54:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:54:20 2013] Assessing source extent using major
[Sat Jun 15 08:54:20 2013] Source does appear to be extended
[Sat Jun 15 08:54:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 08:54:52 2013] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 08:54:52 2013] Initial guess for spatial extent in simple fitting = 11.70"
[Sat Jun 15 08:54:52 2013] source mask rpix=2.7, npix_max = 40, mask sum = 21, frac = 0.516
[Sat Jun 15 08:54:52 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 11.70"
[Sat Jun 15 10:58:06 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun 15 10:58:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src6.csv
[Sat Jun 15 10:58:06 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun 15 10:58:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src6.csv
[Sat Jun 15 10:58:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 10:58:07 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun 15 10:58:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 15 10:58:07 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun 15 10:58:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 15 10:58:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:53:49 2013] Source 7 is offset by 1.807204 and 1.601626 pixels which is larger than
2 X fitted extent = 1.344533 x 7.266069, not incorporating fit results
[Sat Jun 15 12:53:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 12:53:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 12:53:53 2013] Assessing source extent using major
[Sat Jun 15 12:53:53 2013] Source does appear to be extended
[Sat Jun 15 12:53:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:26 2013] XMMSAS src. selection expression = ellipse(14404.357742, 31149.647430, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:26 2013] Writing source region out to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src7_src.reg
[Sat Jun 15 12:54:26 2013] Extracting stamp from image fullrun_pn_xmm0100440101_pi300-10000_cl_sm2.00.img.gz, (129, 321) - (204, 396)
[Sat Jun 15 12:54:26 2013] XMMSAS bgd. selection expression = annulus(14404.357742, 31149.647430, 1087.500000, 2175.000000, X, Y) && !ellipse(13852.824524, 29982.398315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13325.503845, 29396.178467, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:26 2013] Writing fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src7.gif
[Sat Jun 15 12:59:04 2013] Mean detx,y = (11603.05, 2456.55) 
[Sat Jun 15 12:59:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 12:59:21 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 12:59:21 2013] Setting source spectrum file to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Jun 15 12:59:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Jun 15 14:02:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 14:02:41 2013] rmf not generated due to insufficient counts
[Sat Jun 15 15:47:28 2013] Updating aperture counts using extracted products
[Sat Jun 15 15:47:28 2013] Total counts from fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 288.00
[Sat Jun 15 15:47:28 2013] Total counts from fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 1735.00
[Sat Jun 15 15:47:28 2013] Got source and background scale factors 1032435.000000, 8948120.000000
[Sat Jun 15 15:47:28 2013] User source parameters:
  Position = (166.1, 358.6) = 22 29 3.27 -5 13 42.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 87.8 +/- 18.0
  Background aperture counts = 200.2
  Rate = 0.002 +/- 0.0004

[Sat Jun 15 15:47:28 2013] Updating counts from extracted products
[Sat Jun 15 15:47:28 2013] Set source signif. to 87.82/14.15 = 6.21
[Sat Jun 15 15:47:42 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 15:47:42 2013] Using photon index=1.80, rate=0.00203, arf fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src7.arf
[Sat Jun 15 15:47:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 15:47:42 2013] Updating source flux to 1.8e-14
[Sat Jun 15 15:48:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 15:48:13 2013] xmm0100440101/analysis//spectral/fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete