[Sat Jun 15 04:41:42 2013] Detection parameters:
  Position = (296.5, 263.3) = 22 28 25.30 -5 20 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.4 +/- 12.4
  Background counts = 41.0
  Rate = 0.003 +/- 0.0005

[Sat Jun 15 04:41:42 2013] Off-axis axis estimate = 2.55'
[Sat Jun 15 04:44:59 2013] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:44:59 2013] Initial guess for spatial extent in simple fitting = 7.70"
[Sat Jun 15 04:44:59 2013] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.873
[Sat Jun 15 04:44:59 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 7.70"
[Sat Jun 15 06:49:51 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src65.ximg exists
[Sat Jun 15 06:49:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src65.csv
[Sat Jun 15 06:49:51 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src65_1.ximg exists
[Sat Jun 15 06:49:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src65.csv
[Sat Jun 15 06:49:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 06:49:53 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sat Jun 15 06:49:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sat Jun 15 06:49:53 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sat Jun 15 06:49:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sat Jun 15 06:49:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:54:20 2013] Source 68 is offset by -1.295604 and -4.215197 pixels which is larger than
2 X fitted extent = 0.901986 x 0.901986, not incorporating fit results
[Sat Jun 15 08:54:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:54:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:54:20 2013] Assessing source extent using major
[Sat Jun 15 08:54:20 2013] Source does appear to be extended
[Sat Jun 15 08:54:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 08:54:52 2013] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 08:54:52 2013] Initial guess for spatial extent in simple fitting = 7.70"
[Sat Jun 15 08:54:52 2013] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.873
[Sat Jun 15 08:54:52 2013] Giving source the simple spatial ID 65 for pass 1, mean size = 7.70"
[Sat Jun 15 10:58:06 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src65.ximg exists
[Sat Jun 15 10:58:07 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src65.csv
[Sat Jun 15 10:58:07 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src65_1.ximg exists
[Sat Jun 15 10:58:07 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src65.csv
[Sat Jun 15 10:58:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 10:58:08 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Sat Jun 15 10:58:08 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src65.csv
[Sat Jun 15 10:58:08 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Sat Jun 15 10:58:08 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src65.csv
[Sat Jun 15 10:58:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:53:53 2013] Source 68 is offset by 7.565490 and -2.888505 pixels which is larger than
2 X fitted extent = 7.021747 x 7.021747, not incorporating fit results
[Sat Jun 15 12:53:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 12:53:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 12:53:53 2013] Assessing source extent using major
[Sat Jun 15 12:53:53 2013] Source does appear to be extended
[Sat Jun 15 12:53:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:28 2013] XMMSAS src. selection expression = ellipse(25747.079651, 22861.885864, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:28 2013] Writing source region out to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src68_src.reg
[Sat Jun 15 12:54:28 2013] Extracting stamp from image fullrun_pn_xmm0100440101_pi300-10000_cl_sm2.00.img.gz, (259, 226) - (334, 301)
[Sat Jun 15 12:54:28 2013] XMMSAS bgd. selection expression = annulus(25747.079651, 22861.885864, 1087.500000, 2175.000000, X, Y) && !ellipse(25417.789200, 25418.903600, 489.802414, 489.802414, 0.000000, X, Y) && !ellipse(24401.628000, 24819.136600, 1163.472033, 299.256009, 326.327000, X, Y) && !ellipse(26926.531281, 23180.476105, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:28 2013] Writing fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src68.gif
[Sat Jun 15 13:48:46 2013] Mean detx,y = (-1750.35, -1545.36) 
[Sat Jun 15 13:48:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:49:24 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:49:24 2013] Setting source spectrum file to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat Jun 15 13:49:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sat Jun 15 14:46:08 2013] Not generating rmf since there are only 87 counts
[Sat Jun 15 14:46:08 2013] rmf not generated due to insufficient counts
[Sat Jun 15 15:47:40 2013] Updating aperture counts using extracted products
[Sat Jun 15 15:47:40 2013] Total counts from fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src68_src_b10.pi.gz = 256.00
[Sat Jun 15 15:47:40 2013] Total counts from fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src68_bgd.pi.gz = 1786.00
[Sat Jun 15 15:47:40 2013] Got source and background scale factors 749604.000000, 7379507.000000
[Sat Jun 15 15:47:41 2013] User source parameters:
  Position = (296.5, 263.3) = 22 28 25.30 -5 20 29.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 74.6 +/- 17.0
  Background aperture counts = 181.4
  Rate = 0.002 +/- 0.0004

[Sat Jun 15 15:47:41 2013] Updating counts from extracted products
[Sat Jun 15 15:47:41 2013] Set source signif. to 74.58/13.47 = 5.54
[Sat Jun 15 15:47:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 15:47:43 2013] Using photon index=1.80, rate=0.00172, arf fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src68.arf
[Sat Jun 15 15:47:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 15:47:44 2013] Updating source flux to 1.4e-14
[Sat Jun 15 15:48:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 15:48:13 2013] xmm0100440101/analysis//spectral/fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src68_pl.csv not found, spectral fit skipped or did not complete