[Sat Jun 15 04:41:40 2013] Detection parameters:
  Position = (245.6, 371.9) = 22 28 40.12 -5 12 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.0 +/- 18.1
  Background counts = 36.4
  Rate = 0.006 +/- 0.0006

[Sat Jun 15 04:41:42 2013] Off-axis axis estimate = 6.56'
[Sat Jun 15 04:44:59 2013] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:44:59 2013] Initial guess for spatial extent in simple fitting = 9.71"
[Sat Jun 15 04:44:59 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.005
[Sat Jun 15 04:44:59 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.71"
[Sat Jun 15 06:49:51 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 15 06:49:51 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src5.csv
[Sat Jun 15 06:49:51 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 15 06:49:51 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src5.csv
[Sat Jun 15 06:49:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 06:49:52 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 15 06:49:52 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 15 06:49:52 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 15 06:49:52 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 15 06:49:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:54:19 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.977872 pixels away
[Sat Jun 15 08:54:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:54:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:54:20 2013] Assessing source extent using major
[Sat Jun 15 08:54:20 2013] Source does appear to be extended
[Sat Jun 15 08:54:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 08:54:52 2013] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 08:54:52 2013] Initial guess for spatial extent in simple fitting = 9.71"
[Sat Jun 15 08:54:52 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.005
[Sat Jun 15 08:54:52 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.71"
[Sat Jun 15 10:58:06 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 15 10:58:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src5.csv
[Sat Jun 15 10:58:06 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 15 10:58:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src5.csv
[Sat Jun 15 10:58:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 10:58:07 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 15 10:58:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 15 10:58:07 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 15 10:58:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 15 10:58:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:53:49 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.410614 pixels away
[Sat Jun 15 12:53:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 12:53:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 12:53:53 2013] Assessing source extent using major
[Sat Jun 15 12:53:53 2013] Source does appear to be extended
[Sat Jun 15 12:53:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:26 2013] XMMSAS src. selection expression = ellipse(21320.115662, 32306.061371, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:26 2013] Writing source region out to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun 15 12:54:26 2013] Extracting stamp from image fullrun_pn_xmm0100440101_pi300-10000_cl_sm2.00.img.gz, (208, 334) - (283, 409)
[Sat Jun 15 12:54:26 2013] XMMSAS bgd. selection expression = annulus(21320.115662, 32306.061371, 1087.500000, 2175.000000, X, Y) && !ellipse(19343.280411, 33342.093628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23023.629580, 32499.702800, 400.161612, 371.431211, 76.727572, X, Y) && !ellipse(23367.873383, 29355.960083, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:26 2013] Writing fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src6.gif
[Sat Jun 15 12:58:29 2013] Mean detx,y = (5478.84, 5969.46) 
[Sat Jun 15 12:58:31 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 12:58:45 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 12:58:45 2013] Setting source spectrum file to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 15 12:58:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun 15 14:02:29 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 14:02:29 2013] rmf not generated due to insufficient counts
[Sat Jun 15 15:47:28 2013] Updating aperture counts using extracted products
[Sat Jun 15 15:47:28 2013] Total counts from fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 419.00
[Sat Jun 15 15:47:28 2013] Total counts from fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1647.00
[Sat Jun 15 15:47:28 2013] Got source and background scale factors 1126273.000000, 8671433.000000
[Sat Jun 15 15:47:28 2013] User source parameters:
  Position = (245.6, 371.9) = 22 28 40.12 -5 12 36.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 205.1 +/- 21.5
  Background aperture counts = 213.9
  Rate = 0.005 +/- 0.0005

[Sat Jun 15 15:47:28 2013] Updating counts from extracted products
[Sat Jun 15 15:47:28 2013] Set source signif. to 205.08/14.63 = 14.02
[Sat Jun 15 15:47:42 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 15:47:42 2013] Using photon index=1.80, rate=0.00474, arf fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src6.arf
[Sat Jun 15 15:47:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 15:47:42 2013] Updating source flux to 2.4e-14
[Sat Jun 15 15:48:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 15:48:13 2013] xmm0100440101/analysis//spectral/fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete