[Sat Jun 15 04:41:41 2013] Detection parameters:
  Position = (225.8, 152.6) = 22 28 45.90 -5 28 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193.7 +/- 28.7
  Background counts = 32.9
  Rate = 0.004 +/- 0.0007

[Sat Jun 15 04:41:42 2013] Off-axis axis estimate = 11.81'
[Sat Jun 15 04:44:59 2013] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:44:59 2013] Initial guess for spatial extent in simple fitting = 12.33"
[Sat Jun 15 04:44:59 2013] source mask rpix=2.8, npix_max = 44, mask sum = 23, frac = 0.517
[Sat Jun 15 04:44:59 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 12.33"
[Sat Jun 15 06:49:51 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src33.ximg exists
[Sat Jun 15 06:49:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src33.csv
[Sat Jun 15 06:49:51 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat Jun 15 06:49:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src33.csv
[Sat Jun 15 06:49:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 06:49:52 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat Jun 15 06:49:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sat Jun 15 06:49:52 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat Jun 15 06:49:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sat Jun 15 06:49:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:54:20 2013] Spatial fit model total counts = 611.144000, observed total counts = 506.000000
[Sat Jun 15 08:54:20 2013] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 08:54:20 2013] Warning, spatial fit 33 centroid is now closest to src. 18
[Sat Jun 15 08:54:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:54:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:54:20 2013] Assessing source extent using major
[Sat Jun 15 08:54:20 2013] Source does appear to be extended
[Sat Jun 15 08:54:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 08:54:52 2013] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 08:54:52 2013] Initial guess for spatial extent in simple fitting = 12.33"
[Sat Jun 15 08:54:52 2013] source mask rpix=2.8, npix_max = 44, mask sum = 23, frac = 0.517
[Sat Jun 15 08:54:52 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 12.33"
[Sat Jun 15 10:58:06 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src33.ximg exists
[Sat Jun 15 10:58:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src33.csv
[Sat Jun 15 10:58:06 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src33_1.ximg exists
[Sat Jun 15 10:58:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src33.csv
[Sat Jun 15 10:58:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 10:58:07 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sat Jun 15 10:58:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sat Jun 15 10:58:07 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sat Jun 15 10:58:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sat Jun 15 10:58:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:53:50 2013] Spatial fit model total counts = 610.391000, observed total counts = 506.000000
[Sat Jun 15 12:53:50 2013] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 12:53:53 2013] Spatial fit model total counts = 640.571000, observed total counts = 479.000000
[Sat Jun 15 12:53:53 2013] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 12:53:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 12:53:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 12:53:53 2013] Assessing source extent using major
[Sat Jun 15 12:53:53 2013] Source does appear to be extended
[Sat Jun 15 12:53:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:27 2013] XMMSAS src. selection expression = ellipse(19597.552567, 13229.957306, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:27 2013] Writing source region out to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src35_src.reg
[Sat Jun 15 12:54:27 2013] Extracting stamp from image fullrun_pn_xmm0100440101_pi300-10000_cl_sm2.00.img.gz, (188, 115) - (263, 190)
[Sat Jun 15 12:54:27 2013] XMMSAS bgd. selection expression = annulus(19597.552567, 13229.957306, 1087.500000, 2175.000000, X, Y) && !ellipse(20134.906601, 12569.428497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20996.138367, 16123.081665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19394.789307, 15720.255310, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:27 2013] Writing fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src35.gif
[Sat Jun 15 13:21:39 2013] Mean detx,y = (565.53, -12594.47) 
[Sat Jun 15 13:21:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:22:01 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:22:01 2013] Setting source spectrum file to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat Jun 15 13:22:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sat Jun 15 14:30:14 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 14:30:14 2013] rmf not generated due to insufficient counts
[Sat Jun 15 15:47:34 2013] Updating aperture counts using extracted products
[Sat Jun 15 15:47:34 2013] Total counts from fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 283.00
[Sat Jun 15 15:47:34 2013] Total counts from fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src35_bgd.pi.gz = 1539.00
[Sat Jun 15 15:47:34 2013] Got source and background scale factors 916318.000000, 8844022.000000
[Sat Jun 15 15:47:34 2013] User source parameters:
  Position = (225.8, 152.6) = 22 28 45.90 -5 28 28.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 123.5 +/- 17.8
  Background aperture counts = 159.5
  Rate = 0.003 +/- 0.0004

[Sat Jun 15 15:47:34 2013] Updating counts from extracted products
[Sat Jun 15 15:47:34 2013] Set source signif. to 123.55/12.63 = 9.78
[Sat Jun 15 15:47:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 15:47:43 2013] Using photon index=1.80, rate=0.00286, arf fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src35.arf
[Sat Jun 15 15:47:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 15:47:43 2013] Updating source flux to 8.6e-14
[Sat Jun 15 15:48:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 15:48:13 2013] xmm0100440101/analysis//spectral/fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete