[Sat Jun 15 04:41:41 2013] Detection parameters:
  Position = (264.7, 244.0) = 22 28 34.58 -5 21 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 677.1 +/- 32.1
  Background counts = 37.2
  Rate = 0.02 +/- 0.001

[Sat Jun 15 04:41:42 2013] Off-axis axis estimate = 4.65'
[Sat Jun 15 04:44:59 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 04:44:59 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Sat Jun 15 04:44:59 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.991
[Sat Jun 15 04:44:59 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 8.75"
[Sat Jun 15 06:49:51 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jun 15 06:49:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src20.csv
[Sat Jun 15 06:49:51 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jun 15 06:49:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src20.csv
[Sat Jun 15 06:49:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 06:49:52 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jun 15 06:49:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun 15 06:49:52 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jun 15 06:49:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun 15 06:49:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:54:20 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 11.186210 pixels away
[Sat Jun 15 08:54:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:54:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:54:20 2013] Assessing source extent using major
[Sat Jun 15 08:54:20 2013] Source does appear to be extended
[Sat Jun 15 08:54:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 08:54:52 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 08:54:52 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Sat Jun 15 08:54:52 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.991
[Sat Jun 15 08:54:52 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 8.75"
[Sat Jun 15 10:58:06 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src20.ximg exists
[Sat Jun 15 10:58:06 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Jun 15 10:58:06 2013] Fit fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_src20 appears to have run properly
[Sat Jun 15 10:58:07 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Jun 15 10:58:07 2013] fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Jun 15 10:58:07 2013] Fit fullrun_pn_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Jun 15 12:53:50 2013] Spatial fit model total counts = 1002.530000, observed total counts = 937.000000
[Sat Jun 15 12:53:50 2013] Offset between fit and detection position for source 22 = 0.074590 pixels
[Sat Jun 15 12:53:50 2013] 1010.550000 total counts/ 539.686000 bgd. counts: snr = 20.268654
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.074590 pixels
  Position = (264.7, 243.9) = 22 28 34.56 -5 21 52.5
  Extent = 5.2 (4.7-5.6)", rotation angle = 0
  Source counts = 470.9 +/- 31.8
  Background counts = 539.7
  Rate = 0.01 +/- 0.0007
[Sat Jun 15 12:53:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 12:53:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 12:53:53 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 12:53:53 2013] Source does appear to be extended
[Sat Jun 15 12:53:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:26 2013] XMMSAS src. selection expression = ellipse(22983.348000, 21174.769800, 310.935609, 310.935609, 0.000000, X, Y)
[Sat Jun 15 12:54:26 2013] Writing source region out to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src22_src.reg
[Sat Jun 15 12:54:26 2013] Extracting stamp from image fullrun_pn_xmm0100440101_pi300-10000_cl_sm2.00.img.gz, (247, 226) - (283, 262)
[Sat Jun 15 12:54:26 2013] XMMSAS bgd. selection expression = annulus(22983.348000, 21174.769800, 518.226015, 1036.452030, X, Y)
[Sat Jun 15 12:54:26 2013] Writing fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src22.gif
[Sat Jun 15 13:11:37 2013] Mean detx,y = (105.26, -3977.66) 
[Sat Jun 15 13:11:40 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:11:53 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:11:54 2013] Setting source spectrum file to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jun 15 13:11:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Jun 15 15:47:31 2013] Updating aperture counts using extracted products
[Sat Jun 15 15:47:31 2013] Total counts from fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 560.00
[Sat Jun 15 15:47:31 2013] Total counts from fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 477.00
[Sat Jun 15 15:47:31 2013] Got source and background scale factors 307200.000000, 2150631.000000
[Sat Jun 15 15:47:31 2013] User source parameters:
  Position = (264.7, 243.9) = 22 28 34.56 -5 21 52.5
  Extent = 5.2 (4.7-5.6)", rotation angle = 0
  Source aperture counts = 491.9 +/- 24.7
  Background aperture counts = 68.1
  Rate = 0.01 +/- 0.0006

[Sat Jun 15 15:47:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 15:47:43 2013] Using photon index=1.80, rate=0.0109, arf fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src22.arf
[Sat Jun 15 15:47:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 15:47:43 2013] Updating source flux to 5.8e-14
[Sat Jun 15 15:48:13 2013] xmm0100440101/analysis//spectral/fullrun_pn_xmm0100440101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete