[Sat Jun 15 04:42:37 2013] Detection parameters:
  Position = (302.7, 377.6) = 22 28 23.49 -5 12 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.3 +/- 10.0
  Background counts = 12.4
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 04:42:38 2013] Off-axis axis estimate = 5.75'
[Sat Jun 15 07:58:41 2013] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 07:58:41 2013] Initial guess for spatial extent in simple fitting = 9.30"
[Sat Jun 15 07:58:41 2013] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.862
[Sat Jun 15 07:58:41 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 9.30"
[Sat Jun 15 08:54:02 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jun 15 08:54:02 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jun 15 08:54:02 2013] Fit fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src20 appears to have run properly
[Sat Jun 15 08:54:03 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jun 15 08:54:03 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jun 15 08:54:03 2013] Fit fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sat Jun 15 08:54:35 2013] Spatial fit model total counts = 182.764000, observed total counts = 170.000000
[Sat Jun 15 08:54:35 2013] Offset between fit and detection position for source 9 = 0.257864 pixels
[Sat Jun 15 08:54:35 2013] 179.969000 total counts/ 140.587000 bgd. counts: snr = 3.321431
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.257864 pixels
  Position = (302.5, 377.7) = 22 28 23.56 -5 12 10.7
  Extent = 4.7 (3.4-6.1)", rotation angle = 0
  Source counts = 39.4 +/- 13.4
  Background counts = 140.6
  Rate = 0.0009 +/- 0.0003
[Sat Jun 15 08:54:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:54:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:54:35 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 08:54:35 2013] Source does appear to be extended
[Sat Jun 15 08:54:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 11:52:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 11:52:44 2013] Initial guess for spatial extent in simple fitting = 4.70"
[Sat Jun 15 11:52:44 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.901
[Sat Jun 15 11:52:44 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 4.70"
[Sat Jun 15 12:53:32 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src20.ximg exists
[Sat Jun 15 12:53:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src20.csv
[Sat Jun 15 12:53:32 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Jun 15 12:53:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src20.csv
[Sat Jun 15 12:53:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:53:33 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Jun 15 12:53:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Jun 15 12:53:33 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Jun 15 12:53:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Jun 15 12:53:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:54:08 2013] Warning, spatial fit 20 centroid is now closest to src. 10
[Sat Jun 15 12:54:08 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 12:54:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 12:54:08 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 12:54:08 2013] Source does appear to be extended
[Sat Jun 15 12:54:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 15:20:31 2013] XMMSAS src. selection expression = ellipse(26267.962600, 32811.482600, 281.995808, 281.995808, 0.000000, X, Y)
[Sat Jun 15 15:20:31 2013] Writing source region out to fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src9_src.reg
[Sat Jun 15 15:20:31 2013] Extracting stamp from image fullrun_mos2_xmm0100440101_pi300-10000_cl_sm2.00.img.gz, (286, 361) - (319, 394)
[Sat Jun 15 15:20:31 2013] XMMSAS bgd. selection expression = annulus(26267.962600, 32811.482600, 469.993014, 939.986027, X, Y) && !ellipse(26216.522000, 31693.834000, 564.924016, 408.431212, 27.327436, X, Y)
[Sat Jun 15 15:20:31 2013] Writing fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src9.gif
[Sat Jun 15 15:25:38 2013] Mean detx,y = (-859.67, -8209.67) 
[Sat Jun 15 15:25:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 15:25:50 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 15:25:50 2013] Setting source spectrum file to fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Jun 15 15:25:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Jun 15 15:44:18 2013] Not generating rmf since there are only 39 counts
[Sat Jun 15 15:44:18 2013] rmf not generated due to insufficient counts
[Sat Jun 15 15:47:52 2013] Updating aperture counts using extracted products
[Sat Jun 15 15:47:52 2013] Total counts from fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 54.00
[Sat Jun 15 15:47:52 2013] Total counts from fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src9_bgd.pi.gz = 120.00
[Sat Jun 15 15:47:53 2013] Got source and background scale factors 234892.000000, 1620764.000000
[Sat Jun 15 15:47:53 2013] User source parameters:
  Position = (302.5, 377.7) = 22 28 23.56 -5 12 10.7
  Extent = 4.7 (3.4-6.1)", rotation angle = 0
  Source aperture counts = 36.6 +/- 8.4
  Background aperture counts = 17.4
  Rate = 0.0008 +/- 0.0002

[Sat Jun 15 15:47:55 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 15:47:55 2013] Using photon index=1.80, rate=0.00086, arf fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src9.arf
[Sat Jun 15 15:47:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 15:47:55 2013] Updating source flux to 1.9e-14
[Sat Jun 15 15:48:02 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 15 15:48:04 2013] xmm0100440101/analysis//spectral/fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete