[Sat Jun 15 04:42:38 2013] Detection parameters:
  Position = (116.8, 187.0) = 22 29 17.65 -5 25 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.5 +/- 10.4
  Background counts = 9.6
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 04:42:38 2013] Off-axis axis estimate = 15.45'
[Sat Jun 15 07:58:41 2013] Using EEF radius (= 14.15 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 07:58:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 07:58:41 2013] Initial guess for spatial extent in simple fitting = 14.15"
[Sat Jun 15 07:58:41 2013] source mask rpix=3.3, npix_max = 56, mask sum = 62, frac = 1.100
[Sat Jun 15 07:58:41 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 14.15"
[Sat Jun 15 08:54:02 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src30.ximg exists
[Sat Jun 15 08:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src30.csv
[Sat Jun 15 08:54:02 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat Jun 15 08:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src30.csv
[Sat Jun 15 08:54:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:54:03 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat Jun 15 08:54:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sat Jun 15 08:54:03 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Jun 15 08:54:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sat Jun 15 08:54:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:54:35 2013] Warning, spatial fit 30 centroid is now closest to src. 31
[Sat Jun 15 08:54:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:54:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:54:35 2013] Assessing source extent using major
[Sat Jun 15 08:54:35 2013] Source does appear to be extended
[Sat Jun 15 08:54:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 11:52:44 2013] Using EEF radius (= 14.15 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 11:52:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 11:52:44 2013] Initial guess for spatial extent in simple fitting = 14.15"
[Sat Jun 15 11:52:44 2013] source mask rpix=3.3, npix_max = 56, mask sum = 62, frac = 1.100
[Sat Jun 15 11:52:44 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 14.15"
[Sat Jun 15 12:53:32 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src30.ximg exists
[Sat Jun 15 12:53:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src30.csv
[Sat Jun 15 12:53:32 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat Jun 15 12:53:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src30.csv
[Sat Jun 15 12:53:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:53:33 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat Jun 15 12:53:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sat Jun 15 12:53:33 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Jun 15 12:53:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sat Jun 15 12:53:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:54:08 2013] Spatial fit model total counts = 188.821000, observed total counts = 147.000000
[Sat Jun 15 12:54:08 2013] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 12:54:08 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 12:54:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 12:54:08 2013] Assessing source extent using major
[Sat Jun 15 12:54:08 2013] Source does appear to be extended
[Sat Jun 15 12:54:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 15:20:31 2013] XMMSAS src. selection expression = ellipse(10112.449783, 16216.845352, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 15:20:31 2013] Writing source region out to fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src33_src.reg
[Sat Jun 15 15:20:31 2013] Extracting stamp from image fullrun_mos2_xmm0100440101_pi300-10000_cl_sm2.00.img.gz, (79, 149) - (154, 224)
[Sat Jun 15 15:20:31 2013] XMMSAS bgd. selection expression = annulus(10112.449783, 16216.845352, 1087.500000, 2175.000000, X, Y) && !ellipse(11145.334503, 17345.871338, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 15:20:31 2013] Writing fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src33.gif
[Sat Jun 15 15:28:14 2013] Mean detx,y = (-10271.85, 12885.64) 
[Sat Jun 15 15:28:15 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 15:28:32 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 15:28:32 2013] Setting source spectrum file to fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Jun 15 15:28:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat Jun 15 15:45:08 2013] Not generating rmf since there are only 55 counts
[Sat Jun 15 15:45:08 2013] rmf not generated due to insufficient counts
[Sat Jun 15 15:47:54 2013] Updating aperture counts using extracted products
[Sat Jun 15 15:47:54 2013] Total counts from fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 95.00
[Sat Jun 15 15:47:54 2013] Total counts from fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src33_bgd.pi.gz = 201.00
[Sat Jun 15 15:47:54 2013] Got source and background scale factors 1141410.000000, 4199718.000000
[Sat Jun 15 15:47:54 2013] User source parameters:
  Position = (116.8, 187.0) = 22 29 17.65 -5 25 58.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 40.4 +/- 10.8
  Background aperture counts = 54.6
  Rate = 0.0009 +/- 0.0002

[Sat Jun 15 15:47:54 2013] Updating counts from extracted products
[Sat Jun 15 15:47:54 2013] Set source signif. to 40.37/7.39 = 5.46
[Sat Jun 15 15:47:56 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 15:47:56 2013] Using photon index=1.80, rate=0.000882, arf fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src33.arf
[Sat Jun 15 15:47:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 15:47:56 2013] Updating source flux to 3.3e-14
[Sat Jun 15 15:48:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 15:48:04 2013] xmm0100440101/analysis//spectral/fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete