[Sat Jun 15 04:42:38 2013] Detection parameters:
  Position = (264.9, 243.9) = 22 28 34.51 -5 21 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 241.7 +/- 19.3
  Background counts = 13.5
  Rate = 0.006 +/- 0.0005

[Sat Jun 15 04:42:38 2013] Off-axis axis estimate = 4.64'
[Sat Jun 15 07:58:41 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 07:58:41 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Sat Jun 15 07:58:41 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.991
[Sat Jun 15 07:58:41 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 8.75"
[Sat Jun 15 08:54:01 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jun 15 08:54:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src7.csv
[Sat Jun 15 08:54:01 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jun 15 08:54:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src7.csv
[Sat Jun 15 08:54:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:54:02 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jun 15 08:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun 15 08:54:02 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jun 15 08:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun 15 08:54:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:54:35 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 10.852859 pixels away
[Sat Jun 15 08:54:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:54:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:54:35 2013] Assessing source extent using major
[Sat Jun 15 08:54:35 2013] Source does appear to be extended
[Sat Jun 15 08:54:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 11:52:44 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 11:52:44 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Sat Jun 15 11:52:44 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.991
[Sat Jun 15 11:52:44 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 8.75"
[Sat Jun 15 12:53:32 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src7.ximg exists
[Sat Jun 15 12:53:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src7.csv
[Sat Jun 15 12:53:32 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Jun 15 12:53:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src7.csv
[Sat Jun 15 12:53:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:53:32 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Jun 15 12:53:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Jun 15 12:53:32 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Jun 15 12:53:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Jun 15 12:53:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:54:08 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 10.852859 pixels away
[Sat Jun 15 12:54:08 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 12:54:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 12:54:08 2013] Assessing source extent using major
[Sat Jun 15 12:54:08 2013] Source does appear to be extended
[Sat Jun 15 12:54:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 15:20:31 2013] XMMSAS src. selection expression = ellipse(22996.617981, 21169.902069, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 15:20:31 2013] Writing source region out to fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src27_src.reg
[Sat Jun 15 15:20:31 2013] Extracting stamp from image fullrun_mos2_xmm0100440101_pi300-10000_cl_sm2.00.img.gz, (227, 206) - (302, 281)
[Sat Jun 15 15:20:31 2013] XMMSAS bgd. selection expression = annulus(22996.617981, 21169.902069, 1087.500000, 2175.000000, X, Y) && !ellipse(20583.648660, 22733.695000, 501.016014, 331.124810, 27.157602, X, Y)
[Sat Jun 15 15:20:31 2013] Writing fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src27.gif
[Sat Jun 15 15:22:00 2013] Mean detx,y = (79.21, 3824.68) 
[Sat Jun 15 15:22:00 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 15:22:11 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 15:22:11 2013] Setting source spectrum file to fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Jun 15 15:22:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Jun 15 15:39:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 15:39:26 2013] rmf not generated due to insufficient counts
[Sat Jun 15 15:47:51 2013] Updating aperture counts using extracted products
[Sat Jun 15 15:47:51 2013] Total counts from fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 282.00
[Sat Jun 15 15:47:51 2013] Total counts from fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 700.00
[Sat Jun 15 15:47:51 2013] Got source and background scale factors 1277328.000000, 10321924.000000
[Sat Jun 15 15:47:51 2013] User source parameters:
  Position = (264.9, 243.9) = 22 28 34.51 -5 21 52.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 195.4 +/- 17.8
  Background aperture counts = 86.6
  Rate = 0.004 +/- 0.0004

[Sat Jun 15 15:47:51 2013] Updating counts from extracted products
[Sat Jun 15 15:47:51 2013] Set source signif. to 195.38/9.31 = 20.99
[Sat Jun 15 15:47:55 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 15:47:55 2013] Using photon index=1.80, rate=0.00427, arf fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src27.arf
[Sat Jun 15 15:47:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 15:47:55 2013] Updating source flux to 6.6e-14
[Sat Jun 15 15:48:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 15:48:04 2013] xmm0100440101/analysis//spectral/fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete