[Sat Jun 15 04:42:37 2013] Detection parameters:
  Position = (129.5, 329.0) = 22 29 13.93 -5 15 39.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.4 +/- 10.1
  Background counts = 10.8
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 04:42:38 2013] Off-axis axis estimate = 12.44'
[Sat Jun 15 07:58:41 2013] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 07:58:41 2013] Initial guess for spatial extent in simple fitting = 12.65"
[Sat Jun 15 07:58:41 2013] source mask rpix=2.9, npix_max = 46, mask sum = 40, frac = 0.861
[Sat Jun 15 07:58:41 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 12.65"
[Sat Jun 15 08:54:02 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src28.ximg exists
[Sat Jun 15 08:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src28.csv
[Sat Jun 15 08:54:02 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat Jun 15 08:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src28.csv
[Sat Jun 15 08:54:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:54:03 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat Jun 15 08:54:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat Jun 15 08:54:03 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Jun 15 08:54:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat Jun 15 08:54:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:54:35 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.067688 pixels away
[Sat Jun 15 08:54:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:54:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:54:35 2013] Assessing source extent using major
[Sat Jun 15 08:54:35 2013] Source does appear to be extended
[Sat Jun 15 08:54:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 11:52:44 2013] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 11:52:44 2013] Initial guess for spatial extent in simple fitting = 12.65"
[Sat Jun 15 11:52:44 2013] source mask rpix=2.9, npix_max = 46, mask sum = 40, frac = 0.861
[Sat Jun 15 11:52:44 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 12.65"
[Sat Jun 15 12:53:32 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src28.ximg exists
[Sat Jun 15 12:53:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src28.csv
[Sat Jun 15 12:53:32 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src28_1.ximg exists
[Sat Jun 15 12:53:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src28.csv
[Sat Jun 15 12:53:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 12:53:33 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sat Jun 15 12:53:33 2013] fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sat Jun 15 12:53:33 2013] Fit fullrun_mos2_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sat Jun 15 12:54:08 2013] Spatial fit model total counts = 175.305000, observed total counts = 164.000000
[Sat Jun 15 12:54:08 2013] Offset between fit and detection position for source 17 = 0.225072 pixels
[Sat Jun 15 12:54:08 2013] 174.314100 total counts/ 143.612000 bgd. counts: snr = 2.561962
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.225072 pixels
  Position = (129.7, 329.2) = 22 29 13.89 -5 15 41.6
  Extent = 3.2" x 3.2", rotation angle = 0
  Source counts = 30.7 +/- 13.2
  Background counts = 143.6
  Rate = 0.0007 +/- 0.0003
[Sat Jun 15 12:54:08 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 12:54:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 12:54:08 2013] Assessing source extent using major
[Sat Jun 15 12:54:08 2013] Source does appear to be extended
[Sat Jun 15 12:54:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 15:20:31 2013] XMMSAS src. selection expression = ellipse(11232.358400, 28590.979600, 189.756005, 189.756005, 0.000000, X, Y)
[Sat Jun 15 15:20:31 2013] Writing source region out to fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src17_src.reg
[Sat Jun 15 15:20:31 2013] Extracting stamp from image fullrun_mos2_xmm0100440101_pi300-10000_cl_sm2.00.img.gz, (119, 318) - (141, 340)
[Sat Jun 15 15:20:31 2013] XMMSAS bgd. selection expression = annulus(11232.358400, 28590.979600, 316.260009, 632.520018, X, Y)
[Sat Jun 15 15:20:31 2013] Writing fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src17.gif
[Sat Jun 15 15:27:47 2013] Mean detx,y = (-13516.69, 917.97) 
[Sat Jun 15 15:27:48 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 15:27:55 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 15:27:55 2013] Setting source spectrum file to fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jun 15 15:27:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Jun 15 15:44:59 2013] Not generating rmf since there are only 30 counts
[Sat Jun 15 15:44:59 2013] rmf not generated due to insufficient counts
[Sat Jun 15 15:47:53 2013] Updating aperture counts using extracted products
[Sat Jun 15 15:47:53 2013] Total counts from fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 39.00
[Sat Jun 15 15:47:54 2013] Total counts from fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 57.00
[Sat Jun 15 15:47:54 2013] Got source and background scale factors 110400.000000, 800400.000000
[Sat Jun 15 15:47:54 2013] User source parameters:
  Position = (129.7, 329.2) = 22 29 13.89 -5 15 41.6
  Extent = 3.2" x 3.2", rotation angle = 0
  Source aperture counts = 31.1 +/- 7.3
  Background aperture counts = 7.9
  Rate = 0.0007 +/- 0.0002

[Sat Jun 15 15:47:56 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 15:47:56 2013] Using photon index=1.80, rate=0.000671, arf fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src17.arf
[Sat Jun 15 15:47:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 15:47:56 2013] Updating source flux to 2.9e-14
[Sat Jun 15 15:48:02 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 15 15:48:04 2013] xmm0100440101/analysis//spectral/fullrun_mos2_xmm0100440101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete