[Sat Jun 15 04:42:09 2013] Detection parameters:
  Position = (246.0, 372.3) = 22 28 40.00 -5 12 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.1 +/- 10.8
  Background counts = 12.0
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 04:42:09 2013] Off-axis axis estimate = 6.56'
[Sat Jun 15 06:49:53 2013] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 06:49:53 2013] Initial guess for spatial extent in simple fitting = 9.71"
[Sat Jun 15 06:49:53 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.837
[Sat Jun 15 06:49:53 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 9.71"
[Sat Jun 15 07:58:40 2013] fullrun_mos1_xmm0100440101_pi300-10000_cl_pass0_src16.ximg exists
[Sat Jun 15 07:58:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100440101_pi300-10000_cl_pass0_src16.csv
[Sat Jun 15 07:58:40 2013] fullrun_mos1_xmm0100440101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Jun 15 07:58:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100440101_pi300-10000_cl_pass0_src16.csv
[Sat Jun 15 07:58:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100440101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100440101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 07:58:41 2013] fullrun_mos1_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Jun 15 07:58:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jun 15 07:58:41 2013] fullrun_mos1_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Jun 15 07:58:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jun 15 07:58:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100440101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 08:54:28 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 13.177255 pixels away
[Sat Jun 15 08:54:28 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 08:54:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 08:54:28 2013] Assessing source extent using major
[Sat Jun 15 08:54:28 2013] Source does appear to be extended
[Sat Jun 15 08:54:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:58:08 2013] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 10:58:08 2013] Initial guess for spatial extent in simple fitting = 9.71"
[Sat Jun 15 10:58:08 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.837
[Sat Jun 15 10:58:08 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 9.71"
[Sat Jun 15 11:52:43 2013] fullrun_mos1_xmm0100440101_pi300-10000_cl_pass1_src16.ximg exists
[Sat Jun 15 11:52:43 2013] fullrun_mos1_xmm0100440101_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Jun 15 11:52:43 2013] Fit fullrun_mos1_xmm0100440101_pi300-10000_cl_pass1_src16 appears to have run properly
[Sat Jun 15 11:52:43 2013] fullrun_mos1_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Jun 15 11:52:43 2013] fullrun_mos1_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Jun 15 11:52:43 2013] Fit fullrun_mos1_xmm0100440101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Jun 15 12:54:01 2013] Spatial fit model total counts = 199.509000, observed total counts = 187.000000
[Sat Jun 15 12:54:01 2013] Offset between fit and detection position for source 28 = 0.131626 pixels
[Sat Jun 15 12:54:01 2013] 195.626500 total counts/ 150.879000 bgd. counts: snr = 3.642960
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.131626 pixels
  Position = (245.9, 372.2) = 22 28 40.03 -5 12 34.7
  Extent = 4.9 (3.4-7.7)" x 2.9 (2.4-4.0)", rotation angle = 116 (90-218) degrees
  Source counts = 44.7 +/- 14.0
  Background counts = 150.9
  Rate = 0.001 +/- 0.0003
[Sat Jun 15 12:54:01 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 12:54:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 12:54:01 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 12:54:01 2013] Source does appear to be extended
[Sat Jun 15 12:54:01 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.84
[Sat Jun 15 14:50:44 2013] XMMSAS src. selection expression = ellipse(21346.898720, 32331.163200, 294.598808, 175.751405, 115.890407, X, Y)
[Sat Jun 15 14:50:44 2013] Writing source region out to fullrun_mos1_xmm0100440101_pi300-10000_pass1_cl_src28_src.reg
[Sat Jun 15 14:50:44 2013] Extracting stamp from image fullrun_mos1_xmm0100440101_pi300-10000_cl_sm2.00.img.gz, (229, 355) - (263, 389)
[Sat Jun 15 14:50:44 2013] XMMSAS bgd. selection expression = annulus(21346.898720, 32331.163200, 490.998014, 981.996028, X, Y) && !ellipse(22474.129240, 32086.975400, 437.046413, 437.046413, 0.000000, X, Y)
[Sat Jun 15 14:50:44 2013] Writing fullrun_mos1_xmm0100440101_pi300-10000_pass1_cl_src28.gif
[Sat Jun 15 14:54:29 2013] Mean detx,y = (-5895.81, 5111.55) 
[Sat Jun 15 14:54:30 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 14:54:45 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 14:54:45 2013] Setting source spectrum file to fullrun_mos1_xmm0100440101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Jun 15 14:54:45 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0100440101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Jun 15 15:18:29 2013] Not generating rmf since there are only 44 counts
[Sat Jun 15 15:18:29 2013] rmf not generated due to insufficient counts
[Sat Jun 15 15:47:46 2013] Updating aperture counts using extracted products
[Sat Jun 15 15:47:46 2013] Total counts from fullrun_mos1_xmm0100440101_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 53.00
[Sat Jun 15 15:47:46 2013] Total counts from fullrun_mos1_xmm0100440101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 149.00
[Sat Jun 15 15:47:46 2013] Got source and background scale factors 158024.000000, 1868728.000000
[Sat Jun 15 15:47:46 2013] User source parameters:
  Position = (245.9, 372.2) = 22 28 40.03 -5 12 34.7
  Extent = 4.9 (3.4-7.7)" x 2.9 (2.4-4.0)", rotation angle = 116 (90-218) degrees
  Source aperture counts = 40.4 +/- 8.3
  Background aperture counts = 12.6
  Rate = 0.0009 +/- 0.0002

[Sat Jun 15 15:47:49 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 15:47:49 2013] Using photon index=1.80, rate=0.000978, arf fullrun_mos1_xmm0100440101_pi300-10000_pass1_cl_src28.arf
[Sat Jun 15 15:47:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 15:47:49 2013] Updating source flux to 2.3e-14
[Sat Jun 15 15:47:58 2013] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 15 15:48:02 2013] xmm0100440101/analysis//spectral/fullrun_mos1_xmm0100440101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete