[Sat Jun 23 10:09:27 2012] Detection parameters:
  Position = (403.6, 155.5) = 20 53 18.66 44 12 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.1 +/- 7.6
  Background counts = 3.6
  Rate = 0.007 +/- 0.001

[Sat Jun 23 10:09:29 2012] Off-axis axis estimate = 12.87'
[Sat Jun 23 10:11:45 2012] Using EEF radius (= 12.86 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 10:11:45 2012] Initial guess for spatial extent in simple fitting = 12.86"
[Sat Jun 23 10:11:45 2012] source mask rpix=3.0, npix_max = 47, mask sum = 39, frac = 0.816
[Sat Jun 23 10:11:45 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.86"
[Sat Jun 23 12:30:00 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jun 23 12:30:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src7.csv
[Sat Jun 23 12:30:00 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jun 23 12:30:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src7.csv
[Sat Jun 23 12:30:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:30:00 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jun 23 12:30:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun 23 12:30:00 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jun 23 12:30:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun 23 12:30:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 14:23:53 2012] Spatial fit model total counts = 117.296000, observed total counts = 82.000000
[Sat Jun 23 14:23:53 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 23 14:23:53 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:23:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:23:53 2012] Assessing source extent using major
[Sat Jun 23 14:23:53 2012] Source does appear to be extended
[Sat Jun 23 14:23:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 14:23:53 2012] Deleting source due to low Poisson probability 0.9