[Sat Jun 23 10:09:28 2012] Detection parameters: Position = (291.8, 256.0) = 20 54 3.92 44 19 22.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 129.2 +/- 15.4 Background counts = 7.8 Rate = 0.03 +/- 0.004 [Sat Jun 23 10:09:29 2012] Off-axis axis estimate = 3.12' [Sat Jun 23 10:11:45 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting [Sat Jun 23 10:11:45 2012] Initial guess for spatial extent in simple fitting = 7.99" [Sat Jun 23 10:11:45 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916 [Sat Jun 23 10:11:45 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.99" [Sat Jun 23 12:30:00 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src33.ximg exists [Sat Jun 23 12:30:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src33.csv [Sat Jun 23 12:30:00 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src33_1.ximg exists [Sat Jun 23 12:30:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src33.csv [Sat Jun 23 12:30:00 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src33_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 23 12:30:01 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists [Sat Jun 23 12:30:01 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists [Sat Jun 23 12:30:01 2012] Fit fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly [Sat Jun 23 14:23:53 2012] Spatial fit model total counts = 473.454000, observed total counts = 476.000000 [Sat Jun 23 14:23:53 2012] Offset between fit and detection position for source 34 = 6.455775 pixels [Sat Jun 23 14:23:53 2012] 442.973000 total counts/ 199.686000 bgd. counts: snr = 17.216509 Spatial fit parameters: Offset between fit and detection position for source 34 = 6.455775 pixels Position = (294.8, 261.7) = 20 54 2.69 44 19 46.6 Extent = 13.0 (10.8-16.0)", rotation angle = 0 Source counts = 243.3 +/- 21.0 Background counts = 199.7 Rate = 0.05 +/- 0.004 [Sat Jun 23 14:23:53 2012] Vigneting correction estimate = 1.000000 [Sat Jun 23 14:23:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 23 14:23:53 2012] Assessing source extent using major axis lower bound [Sat Jun 23 14:23:53 2012] Source does appear to be extended [Sat Jun 23 14:23:53 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 23 14:23:53 2012] Source is confused with source 32 [Sat Jun 23 14:24:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 23 14:24:06 2012] Initial guess for spatial extent in simple fitting = 12.99" [Sat Jun 23 14:24:06 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.008 [Sat Jun 23 14:24:06 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 12.99" [Sat Jun 23 16:46:18 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_src26.ximg exists [Sat Jun 23 16:46:18 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_src26_1.ximg exists [Sat Jun 23 16:46:18 2012] Fit fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_src26 appears to have run properly [Sat Jun 23 16:46:19 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists [Sat Jun 23 16:46:19 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists [Sat Jun 23 16:46:19 2012] Fit fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly [Sat Jun 23 17:18:26 2012] Spatial fit model total counts = 1199.350000, observed total counts = 1182.000000 [Sat Jun 23 17:18:26 2012] Offset between fit and detection position for source 34 = 4.619587 pixels [Sat Jun 23 17:18:26 2012] Warning, changing simple spatial fit ID from 26 to 24 [Sat Jun 23 17:18:26 2012] 1136.149000 total counts/ 564.805000 bgd. counts: snr = 24.040772 Spatial fit parameters: Offset between fit and detection position for source 34 = 4.619587 pixels Position = (292.3, 257.8) = 20 54 3.71 44 19 29.7 Extent = 20.9 (20.9-20.9)", rotation angle = 0 Source counts = 571.3 +/- 33.7 Background counts = 564.8 Rate = 0.1 +/- 0.007 [Sat Jun 23 17:18:26 2012] Spatial fit model total counts = 746.111000, observed total counts = 771.000000 [Sat Jun 23 17:18:26 2012] Offset between fit and detection position for source 34 = 2.406051 pixels [Sat Jun 23 17:18:26 2012] Warning, changing simple spatial fit ID from 24 to 25 [Sat Jun 23 17:18:26 2012] 766.142000 total counts/ 434.147000 bgd. counts: snr = 15.933572 Spatial fit parameters: Offset between fit and detection position for source 34 = 2.406051 pixels Position = (293.7, 259.8) = 20 54 3.14 44 19 38.3 Extent = 26.0" x 7.1", rotation angle = 297 Source counts = 332.0 +/- 27.7 Background counts = 434.1 Rate = 0.07 +/- 0.006 [Sat Jun 23 17:18:26 2012] Vigneting correction estimate = 1.000000 [Sat Jun 23 17:18:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 23 17:18:26 2012] Assessing source extent using major [Sat Jun 23 17:18:26 2012] Source does appear to be extended [Sat Jun 23 17:18:26 2012] Computing asymmetry using major and minor axis, asym = 3.67 [Sat Jun 23 17:18:26 2012] Source is asymmetric [Sat Jun 23 17:18:36 2012] XMMSAS src. selection expression = ellipse(25502.422000, 22551.148000, 1558.596045, 424.628412, 296.583200, X, Y) [Sat Jun 23 17:18:36 2012] Writing source region out to fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src34_src.reg [Sat Jun 23 17:18:36 2012] Extracting stamp from image fullrun_pn_xmm0100241201_pi300-10000_cl_sm2.00.img.gz, (204, 170) - (383, 349) [Sat Jun 23 17:18:36 2012] XMMSAS bgd. selection expression = annulus(25502.422000, 22551.148000, 2597.660075, 5195.320149, X, Y) && !ellipse(27566.623400, 26787.566400, 1543.622444, 1543.622444, 0.000000, X, Y) && !ellipse(30955.469208, 28171.384247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29159.672000, 27777.144000, 1319.408038, 1319.408038, 0.000000, X, Y) && !ellipse(28537.855286, 28098.094818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27998.024109, 28178.696198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21966.001100, 27104.549200, 632.441618, 632.441618, 0.000000, X, Y) && !ellipse(24143.026300, 26699.061400, 494.703214, 494.703214, 0.000000, X, Y) && !ellipse(29008.270721, 26576.720551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27229.346000, 25850.100000, 1163.200033, 1163.200033, 0.000000, X, Y) && !ellipse(27797.609222, 25183.472687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26204.376587, 24042.484467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26739.480000, 23612.998000, 241.992007, 241.992007, 0.000000, X, Y) && !ellipse(25795.396200, 23226.008000, 1129.504033, 1129.504033, 0.000000, X, Y) && !ellipse(25609.023400, 22767.730800, 2078.128060, 454.807213, 296.266600, X, Y) && !ellipse(24898.503640, 21308.978615, 1211.112035, 393.259124, 295.003067, X, Y) && !ellipse(24841.839040, 21214.042200, 605.554417, 605.554417, 0.000000, X, Y) && !ellipse(23924.384382, 19259.699390, 1515.512044, 441.328343, 296.405621, X, Y) && !ellipse(23742.688800, 18911.234400, 1515.512044, 434.359212, 297.789000, X, Y) && !ellipse(23335.046000, 18084.538000, 901.160026, 901.160026, 0.000000, X, Y) && !ellipse(23039.794800, 17431.560200, 1696.032049, 489.184814, 116.754500, X, Y) && !ellipse(22951.704000, 17435.570000, 1574.880045, 1574.880045, 0.000000, X, Y) && !ellipse(22522.062000, 16393.288000, 1350.704039, 1350.704039, 0.000000, X, Y) && !ellipse(22285.759179, 15900.497201, 1805.032052, 458.432552, 116.670336, X, Y) [Sat Jun 23 17:18:36 2012] Writing fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src34.gif [Sat Jun 23 17:34:49 2012] Mean detx,y = (53.17, 4646.86) [Sat Jun 23 17:34:51 2012] Setting backscal keywords in source and bgd. spectrum [Sat Jun 23 17:35:54 2012] Binned source spectrum to 10 counts/bin [Sat Jun 23 17:35:55 2012] Setting source spectrum file to fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src34_src_b10.pi.gz [Sat Jun 23 17:35:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src34_bgd.pi.gz [Sat Jun 23 20:14:04 2012] Updating aperture counts using extracted products [Sat Jun 23 20:14:04 2012] Error reading totcts from fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src34_src_b10.pi.gz [Sat Jun 23 20:14:04 2012] Calculating source flux in energy range 0.30-8.00 [Sat Jun 23 20:14:04 2012] Using photon index=1.80, rate=0.0689, arf fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src34.arf [Sat Jun 23 20:14:04 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 23 20:14:04 2012] Updating source flux to 2.2e-13 [Sat Jun 23 20:14:46 2012] Flag c found in src. 34 procflags, skipping spectral fitting