[Sat Jun 23 10:09:28 2012] Detection parameters:
  Position = (295.2, 262.1) = 20 54 2.54 44 19 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.4 +/- 17.9
  Background counts = 8.2
  Rate = 0.04 +/- 0.004

[Sat Jun 23 10:09:29 2012] Off-axis axis estimate = 2.65'
[Sat Jun 23 10:11:45 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 10:11:45 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Sat Jun 23 10:11:45 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.768
[Sat Jun 23 10:11:45 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 7.75"
[Sat Jun 23 12:30:00 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src32.ximg exists
[Sat Jun 23 12:30:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src32.csv
[Sat Jun 23 12:30:00 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src32_1.ximg exists
[Sat Jun 23 12:30:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src32.csv
[Sat Jun 23 12:30:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:30:01 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sat Jun 23 12:30:01 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sat Jun 23 12:30:01 2012] Fit fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Sat Jun 23 14:23:53 2012] Spatial fit model total counts = 595.961000, observed total counts = 601.000000
[Sat Jun 23 14:23:53 2012] Offset between fit and detection position for source 33 = 2.769156 pixels
[Sat Jun 23 14:23:53 2012] Warning, changing simple spatial fit ID from 32 to 31
[Sat Jun 23 14:23:53 2012] 640.965000 total counts/ 326.906000 bgd. counts: snr = 17.369999
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 2.769156 pixels
  Position = (295.2, 264.8) = 20 54 2.52 44 20 0.3
  Extent = 15.0 (15.0-15.0)", rotation angle = 0
  Source counts = 314.1 +/- 25.3
  Background counts = 326.9
  Rate = 0.07 +/- 0.005
[Sat Jun 23 14:23:53 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:23:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:23:53 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 14:23:53 2012] Source does appear to be extended
[Sat Jun 23 14:23:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 14:23:53 2012] Source is confused with source 32
[Sat Jun 23 14:24:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 14:24:06 2012] Initial guess for spatial extent in simple fitting = 15.00"
[Sat Jun 23 14:24:06 2012] source mask rpix=3.4, npix_max = 62, mask sum = 64, frac = 1.027
[Sat Jun 23 14:24:06 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 15.00"
[Sat Jun 23 16:46:18 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_src25.ximg exists
[Sat Jun 23 16:46:18 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Jun 23 16:46:18 2012] Fit fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_src25 appears to have run properly
[Sat Jun 23 16:46:19 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Jun 23 16:46:19 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Jun 23 16:46:19 2012] Fit fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Jun 23 17:18:26 2012] Warning, spatial fit 25 centroid is now closest to src. 34
[Sat Jun 23 17:18:26 2012] Spatial fit model total counts = 622.172000, observed total counts = 624.000000
[Sat Jun 23 17:18:26 2012] Offset between fit and detection position for source 33 = 2.596573 pixels
[Sat Jun 23 17:18:26 2012] Warning, changing simple spatial fit ID from 25 to 26
[Sat Jun 23 17:18:26 2012] 632.202000 total counts/ 291.054000 bgd. counts: snr = 19.996595
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 2.596573 pixels
  Position = (294.9, 262.3) = 20 54 2.65 44 19 49.1
  Extent = 26.0 (25.2-52.0)" x 5.7 (4.8-6.6)", rotation angle = 296 (294-299) degrees
  Source counts = 341.1 +/- 25.1
  Background counts = 291.1
  Rate = 0.07 +/- 0.005
[Sat Jun 23 17:18:26 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:18:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:18:26 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 17:18:26 2012] Source does appear to be extended
[Sat Jun 23 17:18:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.79
[Sat Jun 23 17:18:26 2012] Source is asymmetric
[Sat Jun 23 17:18:36 2012] XMMSAS src. selection expression = ellipse(25609.023400, 22767.730800, 1558.596045, 341.105410, 296.266600, X, Y)
[Sat Jun 23 17:18:36 2012] Writing source region out to fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src33_src.reg
[Sat Jun 23 17:18:36 2012] Extracting stamp from image fullrun_pn_xmm0100241201_pi300-10000_cl_sm2.00.img.gz, (205, 173) - (384, 352)
[Sat Jun 23 17:18:36 2012] XMMSAS bgd. selection expression = annulus(25609.023400, 22767.730800, 2597.660075, 5195.320149, X, Y) && !ellipse(27566.623400, 26787.566400, 1543.622444, 1543.622444, 0.000000, X, Y) && !ellipse(30955.469208, 28171.384247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29159.672000, 27777.144000, 1319.408038, 1319.408038, 0.000000, X, Y) && !ellipse(28537.855286, 28098.094818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27998.024109, 28178.696198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21966.001100, 27104.549200, 632.441618, 632.441618, 0.000000, X, Y) && !ellipse(24143.026300, 26699.061400, 494.703214, 494.703214, 0.000000, X, Y) && !ellipse(29008.270721, 26576.720551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27229.346000, 25850.100000, 1163.200033, 1163.200033, 0.000000, X, Y) && !ellipse(27797.609222, 25183.472687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26204.376587, 24042.484467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26739.480000, 23612.998000, 241.992007, 241.992007, 0.000000, X, Y) && !ellipse(25795.396200, 23226.008000, 1129.504033, 1129.504033, 0.000000, X, Y) && !ellipse(25502.422000, 22551.148000, 2078.128060, 566.171216, 296.583200, X, Y) && !ellipse(24898.503640, 21308.978615, 1211.112035, 393.259124, 295.003067, X, Y) && !ellipse(24841.839040, 21214.042200, 605.554417, 605.554417, 0.000000, X, Y) && !ellipse(23924.384382, 19259.699390, 1515.512044, 441.328343, 296.405621, X, Y) && !ellipse(23742.688800, 18911.234400, 1515.512044, 434.359212, 297.789000, X, Y) && !ellipse(23335.046000, 18084.538000, 901.160026, 901.160026, 0.000000, X, Y) && !ellipse(23039.794800, 17431.560200, 1696.032049, 489.184814, 116.754500, X, Y) && !ellipse(22951.704000, 17435.570000, 1574.880045, 1574.880045, 0.000000, X, Y) && !ellipse(22522.062000, 16393.288000, 1350.704039, 1350.704039, 0.000000, X, Y) && !ellipse(22285.759179, 15900.497201, 1805.032052, 458.432552, 116.670336, X, Y)
[Sat Jun 23 17:18:36 2012] Writing fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src33.gif
[Sat Jun 23 17:33:41 2012] Mean detx,y = (45.22, 4434.39) 
[Sat Jun 23 17:33:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 17:34:43 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 17:34:43 2012] Setting source spectrum file to fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Jun 23 17:34:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat Jun 23 20:14:04 2012] Updating aperture counts using extracted products
[Sat Jun 23 20:14:04 2012] Error reading totcts from fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Jun 23 20:14:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 20:14:04 2012] Using photon index=1.80, rate=0.0708, arf fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src33.arf
[Sat Jun 23 20:14:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 20:14:04 2012] Updating source flux to 2.2e-13
[Sat Jun 23 20:14:46 2012] Flag c found in src. 33 procflags, skipping spectral fitting