[Sat Jun 23 10:09:28 2012] Detection parameters:
  Position = (301.8, 276.9) = 20 53 59.87 44 20 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.0 +/- 18.1
  Background counts = 9.0
  Rate = 0.04 +/- 0.004

[Sat Jun 23 10:09:29 2012] Off-axis axis estimate = 1.58'
[Sat Jun 23 10:11:45 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 10:11:45 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Sat Jun 23 10:11:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.858
[Sat Jun 23 10:11:45 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.22"
[Sat Jun 23 12:30:00 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src28.ximg exists
[Sat Jun 23 12:30:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src28.csv
[Sat Jun 23 12:30:00 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat Jun 23 12:30:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src28.csv
[Sat Jun 23 12:30:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 12:30:01 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat Jun 23 12:30:01 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Jun 23 12:30:01 2012] Fit fullrun_pn_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sat Jun 23 14:23:53 2012] Warning, spatial fit 28 centroid is now closest to src. 31
[Sat Jun 23 14:23:53 2012] Source 29 is offset by -6.250485 and 4.959175 pixels which is larger than
2 X fitted extent = 1.790681 x 1.790681, not incorporating fit results
[Sat Jun 23 14:23:53 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:23:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:23:53 2012] Assessing source extent using major
[Sat Jun 23 14:23:53 2012] Source does appear to be extended
[Sat Jun 23 14:23:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 14:24:06 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 14:24:06 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Sat Jun 23 14:24:06 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.858
[Sat Jun 23 14:24:06 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 7.22"
[Sat Jun 23 16:46:18 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_src22.ximg exists
[Sat Jun 23 16:46:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_src22.csv
[Sat Jun 23 16:46:18 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat Jun 23 16:46:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_src22.csv
[Sat Jun 23 16:46:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 16:46:19 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat Jun 23 16:46:19 2012] fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Jun 23 16:46:19 2012] Fit fullrun_pn_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sat Jun 23 17:18:26 2012] Source 29 is offset by 7.394650 and -3.797742 pixels which is larger than
2 X fitted extent = 2.013352 x 2.013352, not incorporating fit results
[Sat Jun 23 17:18:26 2012] Source 29 is offset by -6.266568 and 4.966226 pixels which is larger than
2 X fitted extent = 1.825812 x 1.825812, not incorporating fit results
[Sat Jun 23 17:18:26 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 66.649888 pixels away
[Sat Jun 23 17:18:26 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 73.337565 pixels away
[Sat Jun 23 17:18:26 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 115.566254 pixels away
[Sat Jun 23 17:18:26 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:18:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:18:26 2012] Assessing source extent using major
[Sat Jun 23 17:18:26 2012] Source does appear to be extended
[Sat Jun 23 17:18:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 17:18:26 2012] Source is confused with source 33
[Sat Jun 23 17:18:36 2012] XMMSAS src. selection expression = ellipse(26204.376587, 24042.484467, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 23 17:18:36 2012] Writing source region out to fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src29_src.reg
[Sat Jun 23 17:18:36 2012] Extracting stamp from image fullrun_pn_xmm0100241201_pi300-10000_cl_sm2.00.img.gz, (264, 239) - (339, 314)
[Sat Jun 23 17:18:36 2012] XMMSAS bgd. selection expression = annulus(26204.376587, 24042.484467, 1087.500000, 2175.000000, X, Y) && !ellipse(27566.623400, 26787.566400, 1543.622444, 1543.622444, 0.000000, X, Y) && !ellipse(24143.026300, 26699.061400, 494.703214, 494.703214, 0.000000, X, Y) && !ellipse(29008.270721, 26576.720551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27229.346000, 25850.100000, 1163.200033, 1163.200033, 0.000000, X, Y) && !ellipse(27797.609222, 25183.472687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26739.480000, 23612.998000, 241.992007, 241.992007, 0.000000, X, Y) && !ellipse(25795.396200, 23226.008000, 1129.504033, 1129.504033, 0.000000, X, Y) && !ellipse(25609.023400, 22767.730800, 2078.128060, 454.807213, 296.266600, X, Y) && !ellipse(25502.422000, 22551.148000, 2078.128060, 566.171216, 296.583200, X, Y) && !ellipse(24898.503640, 21308.978615, 1211.112035, 393.259124, 295.003067, X, Y)
[Sat Jun 23 17:18:36 2012] Writing fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src29.gif
[Sat Jun 23 17:32:20 2012] Mean detx,y = (98.04, 3047.35) 
[Sat Jun 23 17:32:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 17:32:36 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 17:32:37 2012] Setting source spectrum file to fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jun 23 17:32:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Jun 23 19:05:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 23 19:05:25 2012] rmf not generated due to insufficient counts
[Sat Jun 23 20:14:04 2012] Updating aperture counts using extracted products
[Sat Jun 23 20:14:04 2012] Error reading totcts from fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jun 23 20:14:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 20:14:04 2012] Using photon index=1.80, rate=0.038, arf fullrun_pn_xmm0100241201_pi300-10000_pass1_cl_src29.arf
[Sat Jun 23 20:14:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 20:14:04 2012] Updating source flux to 1.2e-13
[Sat Jun 23 20:14:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting