[Sat Jun 23 10:10:18 2012] Detection parameters:
  Position = (351.1, 345.0) = 20 53 39.84 44 25 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.7 +/- 16.1
  Background counts = 8.7
  Rate = 0.03 +/- 0.003

[Sat Jun 23 10:10:19 2012] Off-axis axis estimate = 5.10'
[Sat Jun 23 12:48:48 2012] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 12:48:48 2012] Initial guess for spatial extent in simple fitting = 8.98"
[Sat Jun 23 12:48:48 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.141
[Sat Jun 23 12:48:48 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.98"
[Sat Jun 23 14:23:43 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 23 14:23:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_src3.csv
[Sat Jun 23 14:23:43 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 23 14:23:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_src3.csv
[Sat Jun 23 14:23:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 14:23:43 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 23 14:23:43 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 23 14:23:43 2012] Fit fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun 23 14:23:58 2012] Spatial fit model total counts = 156.612000, observed total counts = 156.000000
[Sat Jun 23 14:23:58 2012] Offset between fit and detection position for source 3 = 0.291502 pixels
[Sat Jun 23 14:23:58 2012] 154.940000 total counts/ 34.189000 bgd. counts: snr = 20.651307
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.291502 pixels
  Position = (350.8, 345.0) = 20 53 39.96 44 25 48.9
  Extent = 5.7 (4.9-6.6)", rotation angle = 0
  Source counts = 120.8 +/- 12.4
  Background counts = 34.2
  Rate = 0.02 +/- 0.002
[Sat Jun 23 14:23:58 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:23:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:23:58 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 14:23:58 2012] Source does appear to be extended
[Sat Jun 23 14:23:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 16:55:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 16:55:26 2012] Initial guess for spatial extent in simple fitting = 5.74"
[Sat Jun 23 16:55:26 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.208
[Sat Jun 23 16:55:26 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.74"
[Sat Jun 23 17:18:18 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 23 17:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_src3.csv
[Sat Jun 23 17:18:18 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 23 17:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_src3.csv
[Sat Jun 23 17:18:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 17:18:18 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 23 17:18:18 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 23 17:18:18 2012] Fit fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun 23 17:18:29 2012] Spatial fit model total counts = 155.522000, observed total counts = 158.000000
[Sat Jun 23 17:18:29 2012] Offset between fit and detection position for source 3 = 0.027712 pixels
[Sat Jun 23 17:18:29 2012] 154.475100 total counts/ 33.495100 bgd. counts: snr = 20.903689
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.027712 pixels
  Position = (350.8, 345.0) = 20 53 39.97 44 25 48.9
  Extent = 5.8 (5.0-6.6)", rotation angle = 0
  Source counts = 121.0 +/- 12.4
  Background counts = 33.5
  Rate = 0.02 +/- 0.002
[Sat Jun 23 17:18:29 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:18:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:18:29 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 17:18:29 2012] Source does appear to be extended
[Sat Jun 23 17:18:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 20:00:40 2012] XMMSAS src. selection expression = ellipse(30467.042000, 29966.750400, 347.129410, 347.129410, 0.000000, X, Y)
[Sat Jun 23 20:00:40 2012] Writing source region out to fullrun_mos2_xmm0100241201_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 23 20:00:40 2012] Extracting stamp from image fullrun_mos2_xmm0100241201_pi300-10000_cl_sm2.00.img.gz, (331, 325) - (371, 365)
[Sat Jun 23 20:00:40 2012] XMMSAS bgd. selection expression = annulus(30467.042000, 29966.750400, 578.549017, 1157.098033, X, Y)
[Sat Jun 23 20:00:40 2012] Writing fullrun_mos2_xmm0100241201_pi300-10000_pass1_cl_src3.gif
[Sat Jun 23 20:05:31 2012] Mean detx,y = (-1089.67, 4017.60) 
[Sat Jun 23 20:05:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 20:05:39 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 20:05:39 2012] Setting source spectrum file to fullrun_mos2_xmm0100241201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 23 20:05:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100241201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 23 20:14:05 2012] Updating aperture counts using extracted products
[Sat Jun 23 20:14:05 2012] Error reading totcts from fullrun_mos2_xmm0100241201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 23 20:14:05 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 20:14:05 2012] Using photon index=1.80, rate=0.0199, arf fullrun_mos2_xmm0100241201_pi300-10000_pass1_cl_src3.arf
[Sat Jun 23 20:14:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 20:14:05 2012] Updating source flux to 3e-13