[Sat Jun 23 10:10:18 2012] Detection parameters:
  Position = (306.4, 274.1) = 20 53 57.98 44 20 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.3 +/- 9.5
  Background counts = 9.8
  Rate = 0.008 +/- 0.002

[Sat Jun 23 10:10:19 2012] Off-axis axis estimate = 1.86'
[Sat Jun 23 12:48:48 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 12:48:48 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sat Jun 23 12:48:48 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.729
[Sat Jun 23 12:48:48 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.36"
[Sat Jun 23 14:23:43 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jun 23 14:23:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_src10.csv
[Sat Jun 23 14:23:43 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jun 23 14:23:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_src10.csv
[Sat Jun 23 14:23:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 14:23:43 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jun 23 14:23:43 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jun 23 14:23:43 2012] Fit fullrun_mos2_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Jun 23 14:23:58 2012] Spatial fit model total counts = 149.071000, observed total counts = 142.000000
[Sat Jun 23 14:23:58 2012] Offset between fit and detection position for source 17 = 1.170945 pixels
[Sat Jun 23 14:23:58 2012] 152.328200 total counts/ 112.568000 bgd. counts: snr = 3.747495
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.170945 pixels
  Position = (307.1, 273.1) = 20 53 57.72 44 20 36.5
  Extent = 11.1 (3.9-14.7)", rotation angle = 0
  Source counts = 39.8 +/- 12.3
  Background counts = 112.6
  Rate = 0.007 +/- 0.002
[Sat Jun 23 14:23:58 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:23:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:23:58 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 14:23:58 2012] Source does appear to be extended
[Sat Jun 23 14:23:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 16:55:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 16:55:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 16:55:26 2012] Initial guess for spatial extent in simple fitting = 11.12"
[Sat Jun 23 16:55:26 2012] source mask rpix=2.6, npix_max = 37, mask sum = 19, frac = 0.509
[Sat Jun 23 16:55:26 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 11.12"
[Sat Jun 23 17:18:18 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_src8.ximg exists
[Sat Jun 23 17:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_src8.csv
[Sat Jun 23 17:18:18 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Jun 23 17:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_src8.csv
[Sat Jun 23 17:18:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 17:18:18 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Jun 23 17:18:18 2012] fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Jun 23 17:18:18 2012] Fit fullrun_mos2_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Jun 23 17:18:29 2012] Warning, spatial fit 8 centroid is now closest to src. 15
[Sat Jun 23 17:18:29 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:18:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:18:29 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 17:18:29 2012] Source does appear to be extended
[Sat Jun 23 17:18:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 17:18:29 2012] Deleting source due to low Poisson probability 0.9