[Sat Jun 23 10:09:55 2012] Detection parameters: Position = (445.1, 252.2) = 20 53 1.79 44 19 4.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 33.2 +/- 7.6 Background counts = 6.2 Rate = 0.008 +/- 0.002 [Sat Jun 23 10:09:55 2012] Off-axis axis estimate = 11.15' [Sat Jun 23 12:30:01 2012] Using EEF radius (= 12.00 ")to estimate initial spatial extent for simple fitting [Sat Jun 23 12:30:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 23 12:30:01 2012] Initial guess for spatial extent in simple fitting = 12.00" [Sat Jun 23 12:30:01 2012] source mask rpix=2.8, npix_max = 42, mask sum = 32, frac = 0.753 [Sat Jun 23 12:30:01 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.00" [Sat Jun 23 12:48:47 2012] fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_src7.ximg exists [Sat Jun 23 12:48:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_src7.csv [Sat Jun 23 12:48:47 2012] fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_src7_1.ximg exists [Sat Jun 23 12:48:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_src7.csv [Sat Jun 23 12:48:47 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_src7_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 23 12:48:48 2012] fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists [Sat Jun 23 12:48:48 2012] fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists [Sat Jun 23 12:48:48 2012] Fit fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly [Sat Jun 23 14:23:55 2012] Spatial fit model total counts = 45.466100, observed total counts = 42.000000 [Sat Jun 23 14:23:55 2012] Offset between fit and detection position for source 8 = 0.416382 pixels [Sat Jun 23 14:23:55 2012] 47.553200 total counts/ 30.023400 bgd. counts: snr = 3.199242 Spatial fit parameters: Offset between fit and detection position for source 8 = 0.416382 pixels Position = (444.8, 251.9) = 20 53 1.89 44 19 3.0 Extent = 4.0 (3.0-5.5)", rotation angle = 0 Source counts = 17.5 +/- 6.9 Background counts = 30.0 Rate = 0.003 +/- 0.001 [Sat Jun 23 14:23:55 2012] Vigneting correction estimate = 1.000000 [Sat Jun 23 14:23:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 23 14:23:55 2012] Assessing source extent using major axis lower bound [Sat Jun 23 14:23:55 2012] Source does appear to be extended [Sat Jun 23 14:23:55 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 23 14:23:55 2012] Deleting source due to low Poisson probability 0.8