[Sat Jun 23 10:09:55 2012] Detection parameters:
  Position = (386.9, 365.0) = 20 53 25.27 44 27 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.5 +/- 14.0
  Background counts = 8.3
  Rate = 0.03 +/- 0.003

[Sat Jun 23 10:09:55 2012] Off-axis axis estimate = 8.03'
[Sat Jun 23 12:30:01 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 12:30:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 12:30:01 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Sat Jun 23 12:30:01 2012] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.981
[Sat Jun 23 12:30:01 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.44"
[Sat Jun 23 12:48:47 2012] fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 23 12:48:47 2012] fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 23 12:48:47 2012] Fit fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_src3 appears to have run properly
[Sat Jun 23 12:48:48 2012] fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 23 12:48:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun 23 12:48:48 2012] fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 23 12:48:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun 23 12:48:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100241201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 14:23:55 2012] Spatial fit model total counts = 136.558000, observed total counts = 148.000000
[Sat Jun 23 14:23:55 2012] Offset between fit and detection position for source 5 = 0.717390 pixels
[Sat Jun 23 14:23:55 2012] 140.764900 total counts/ 48.211600 bgd. counts: snr = 13.329570
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.717390 pixels
  Position = (386.4, 364.5) = 20 53 25.50 44 27 13.7
  Extent = 7.6 (6.0-9.5)" x 6.8 (5.4-8.9)", rotation angle = 90 (89-260) degrees
  Source counts = 92.6 +/- 11.9
  Background counts = 48.2
  Rate = 0.02 +/- 0.002
[Sat Jun 23 14:23:55 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 14:23:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 14:23:55 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 14:23:55 2012] Source does appear to be extended
[Sat Jun 23 14:23:55 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.68
[Sat Jun 23 16:46:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 16:46:19 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Sat Jun 23 16:46:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 24, frac = 1.292
[Sat Jun 23 16:46:19 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.20"
[Sat Jun 23 16:55:26 2012] fullrun_mos1_xmm0100241201_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 23 16:55:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100241201_pi300-10000_cl_pass1_src3.csv
[Sat Jun 23 16:55:26 2012] fullrun_mos1_xmm0100241201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 23 16:55:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100241201_pi300-10000_cl_pass1_src3.csv
[Sat Jun 23 16:55:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100241201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100241201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 16:55:26 2012] fullrun_mos1_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 23 16:55:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jun 23 16:55:26 2012] fullrun_mos1_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 23 16:55:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jun 23 16:55:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100241201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 17:18:27 2012] Warning, spatial fit 3 centroid is now closest to src. 11
[Sat Jun 23 17:18:27 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 17:18:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 17:18:27 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 17:18:27 2012] Source does appear to be extended
[Sat Jun 23 17:18:27 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.68
[Sat Jun 23 19:38:35 2012] XMMSAS src. selection expression = ellipse(33564.948000, 31666.261200, 457.197013, 406.809012, 89.554467, X, Y)
[Sat Jun 23 19:38:35 2012] Writing source region out to fullrun_mos1_xmm0100241201_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun 23 19:38:35 2012] Extracting stamp from image fullrun_mos1_xmm0100241201_pi300-10000_cl_sm2.00.img.gz, (360, 338) - (413, 391)
[Sat Jun 23 19:38:35 2012] XMMSAS bgd. selection expression = annulus(33564.948000, 31666.261200, 761.995022, 1523.990044, X, Y)
[Sat Jun 23 19:38:35 2012] Writing fullrun_mos1_xmm0100241201_pi300-10000_pass1_cl_src5.gif
[Sat Jun 23 19:44:25 2012] Mean detx,y = (7123.65, 2974.38) 
[Sat Jun 23 19:44:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 19:44:38 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 19:44:38 2012] Setting source spectrum file to fullrun_mos1_xmm0100241201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 23 19:44:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100241201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun 23 20:00:27 2012] Not generating rmf since there are only 92 counts
[Sat Jun 23 20:00:27 2012] rmf not generated due to insufficient counts
[Sat Jun 23 20:14:04 2012] Updating aperture counts using extracted products
[Sat Jun 23 20:14:04 2012] Error reading totcts from fullrun_mos1_xmm0100241201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 23 20:14:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 20:14:04 2012] Using photon index=1.80, rate=0.0152, arf fullrun_mos1_xmm0100241201_pi300-10000_pass1_cl_src5.arf
[Sat Jun 23 20:14:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 20:14:04 2012] Updating source flux to 2.4e-13
[Sat Jun 23 20:14:06 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting