[Thu Aug 23 23:29:18 2012] Detection parameters:
  Position = (290.4, 312.0) = 23 49 35.92 36 27 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.4 +/- 12.9
  Background counts = 8.1
  Rate = 0.01 +/- 0.002

[Thu Aug 23 23:29:18 2012] Off-axis axis estimate = 1.14'
[Thu Aug 23 23:30:45 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 23:30:45 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Thu Aug 23 23:30:45 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Thu Aug 23 23:30:45 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.00"
[Fri Aug 24 01:19:16 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_src25.ximg exists
[Fri Aug 24 01:19:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_src25.csv
[Fri Aug 24 01:19:16 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Aug 24 01:19:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_src25.csv
[Fri Aug 24 01:19:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 01:19:17 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Aug 24 01:19:17 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Aug 24 01:19:17 2012] Fit fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Aug 24 01:54:27 2012] Source 25 is offset by -3.881442 and -6.949862 pixels which is larger than
2 X fitted extent = 6.761931 x 6.761931, not incorporating fit results
[Fri Aug 24 01:54:27 2012] Source 25 is offset by -3.532660 and -6.713701 pixels which is larger than
2 X fitted extent = 6.436460 x 6.436460, not incorporating fit results
[Fri Aug 24 01:54:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 01:54:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 01:54:27 2012] Assessing source extent using major
[Fri Aug 24 01:54:27 2012] Source does appear to be extended
[Fri Aug 24 01:54:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 01:54:38 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 01:54:38 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Fri Aug 24 01:54:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Fri Aug 24 01:54:38 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 7.00"
[Fri Aug 24 03:51:21 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_src24.ximg exists
[Fri Aug 24 03:51:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_src24.csv
[Fri Aug 24 03:51:21 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri Aug 24 03:51:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_src24.csv
[Fri Aug 24 03:51:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 03:51:22 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri Aug 24 03:51:22 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Aug 24 03:51:22 2012] Fit fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Fri Aug 24 04:09:06 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 23.643870 pixels away
[Fri Aug 24 04:09:06 2012] Spatial fit model total counts = 508.951000, observed total counts = 511.000000
[Fri Aug 24 04:09:06 2012] Offset between fit and detection position for source 25 = 7.237871 pixels
[Fri Aug 24 04:09:06 2012] 533.233000 total counts/ 296.622000 bgd. counts: snr = 13.738308
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 7.237871 pixels
  Position = (285.6, 306.6) = 23 49 37.66 36 26 38.0
  Extent = 14.0 (14.0-28.0)", rotation angle = 0
  Source counts = 236.6 +/- 23.1
  Background counts = 296.6
  Rate = 0.04 +/- 0.003
[Fri Aug 24 04:09:06 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 04:09:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 04:09:06 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 04:09:06 2012] Source does appear to be extended
[Fri Aug 24 04:09:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 04:09:14 2012] XMMSAS src. selection expression = ellipse(24795.762000, 26622.528000, 839.958024, 839.958024, 0.000000, X, Y)
[Fri Aug 24 04:09:14 2012] Writing source region out to fullrun_pn_xmm0100241001_pi300-10000_pass1_cl_src25_src.reg
[Fri Aug 24 04:09:14 2012] Extracting stamp from image fullrun_pn_xmm0100241001_pi300-10000_cl_sm2.00.img.gz, (237, 258) - (334, 355)
[Fri Aug 24 04:09:14 2012] XMMSAS bgd. selection expression = annulus(24795.762000, 26622.528000, 1399.930040, 2799.860081, X, Y) && !ellipse(24021.527600, 25273.013400, 1454.270442, 1454.270442, 0.000000, X, Y) && !ellipse(27431.459891, 30440.782162, 1668.712048, 415.071931, 303.480892, X, Y) && !ellipse(26782.092600, 29458.351600, 1668.712048, 433.959212, 306.418000, X, Y) && !ellipse(26613.406000, 29330.288000, 1292.552037, 1292.552037, 0.000000, X, Y) && !ellipse(26113.190000, 28406.128000, 2457.168071, 2457.168071, 0.000000, X, Y) && !ellipse(25889.208000, 28154.128000, 1206.952035, 1206.952035, 0.000000, X, Y) && !ellipse(24192.394000, 25928.834000, 1115.336032, 1115.336032, 0.000000, X, Y)
[Fri Aug 24 04:09:14 2012] Writing fullrun_pn_xmm0100241001_pi300-10000_pass1_cl_src25.gif
[Fri Aug 24 04:32:44 2012] Mean detx,y = (246.55, 1219.87) 
[Fri Aug 24 04:32:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 04:33:06 2012] grppha failed
[Fri Aug 24 04:33:06 2012] Setting source spectrum file to fullrun_pn_xmm0100241001_pi300-10000_pass1_cl_src25_src.pi.gz
[Fri Aug 24 04:33:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100241001_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri Aug 24 04:43:42 2012] Updating aperture counts using extracted products
[Fri Aug 24 04:43:42 2012] Error reading totcts from fullrun_pn_xmm0100241001_pi300-10000_pass1_cl_src25_src.pi.gz
[Fri Aug 24 04:43:42 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 04:43:45 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Fri Aug 24 04:43:45 2012] Source 25 has no response, skipping
[Fri Aug 24 04:43:46 2012] xmm0100241001/analysis//spectral/fullrun_pn_xmm0100241001_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete