[Thu Aug 23 23:29:17 2012] Detection parameters:
  Position = (276.7, 291.0) = 23 49 40.87 36 25 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36876.0 +/- 228.1
  Background counts = 9.3
  Rate = 6 +/- 0.04

[Thu Aug 23 23:29:18 2012] Off-axis axis estimate = 1.67'
[Thu Aug 23 23:30:45 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 23:30:45 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Aug 23 23:30:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.062
[Thu Aug 23 23:30:45 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.26"
[Fri Aug 24 01:19:15 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug 24 01:19:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_src2.csv
[Fri Aug 24 01:19:15 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug 24 01:19:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_src2.csv
[Fri Aug 24 01:19:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 01:19:16 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug 24 01:19:16 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug 24 01:19:16 2012] Fit fullrun_pn_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Aug 24 01:54:27 2012] Spatial fit model total counts = 33030.000000, observed total counts = 32937.000000
[Fri Aug 24 01:54:27 2012] Offset between fit and detection position for source 2 = 0.034329 pixels
[Fri Aug 24 01:54:27 2012] 33058.090000 total counts/ 6533.490000 bgd. counts: snr = 328.152886
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.034329 pixels
  Position = (276.7, 291.1) = 23 49 40.87 36 25 30.6
  Extent = 6.1 (6.0-6.1)", rotation angle = 0
  Source counts = 26524.6 +/- 181.8
  Background counts = 6533.5
  Rate = 4 +/- 0.03
[Fri Aug 24 01:54:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 01:54:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 01:54:27 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 01:54:27 2012] Source does appear to be extended
[Fri Aug 24 01:54:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 01:54:27 2012] Source is confused with source 26
[Fri Aug 24 01:54:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 01:54:38 2012] Initial guess for spatial extent in simple fitting = 6.06"
[Fri Aug 24 01:54:38 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.116
[Fri Aug 24 01:54:38 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.06"
[Fri Aug 24 03:51:21 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_src2.ximg exists
[Fri Aug 24 03:51:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_src2.csv
[Fri Aug 24 03:51:21 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Aug 24 03:51:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_src2.csv
[Fri Aug 24 03:51:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 03:51:21 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug 24 03:51:21 2012] fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug 24 03:51:21 2012] Fit fullrun_pn_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Aug 24 04:09:06 2012] Spatial fit model total counts = 33021.300000, observed total counts = 32937.000000
[Fri Aug 24 04:09:06 2012] Offset between fit and detection position for source 2 = 0.000632 pixels
[Fri Aug 24 04:09:06 2012] 33002.940000 total counts/ 6482.840000 bgd. counts: snr = 329.376421
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000632 pixels
  Position = (276.7, 291.1) = 23 49 40.87 36 25 30.6
  Extent = 6.1 (6.0-6.1)", rotation angle = 0
  Source counts = 26520.1 +/- 181.7
  Background counts = 6482.8
  Rate = 4 +/- 0.03
[Fri Aug 24 04:09:06 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 04:09:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 04:09:06 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 04:09:06 2012] Source does appear to be extended
[Fri Aug 24 04:09:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 04:09:14 2012] Counts = 26520.100000, rescaling region sizes by 3.000000
[Fri Aug 24 04:09:14 2012] XMMSAS src. selection expression = ellipse(24021.527600, 25273.013400, 1090.702831, 1090.702831, 0.000000, X, Y)
[Fri Aug 24 04:09:14 2012] Writing source region out to fullrun_pn_xmm0100241001_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 24 04:09:14 2012] Extracting stamp from image fullrun_pn_xmm0100241001_pi300-10000_cl_sm2.00.img.gz, (214, 228) - (339, 354)
[Fri Aug 24 04:09:14 2012] XMMSAS bgd. selection expression = annulus(24021.527600, 25273.013400, 5453.514157, 10907.028314, X, Y) && !ellipse(29709.667400, 33909.824260, 2752.488079, 481.041614, 125.458000, X, Y) && !ellipse(31418.296000, 36483.244000, 1322.712038, 1322.712038, 0.000000, X, Y) && !ellipse(31177.029783, 36095.747809, 1693.312049, 439.267472, 123.547802, X, Y) && !ellipse(30376.876200, 34889.553200, 1693.312049, 396.739211, 123.885700, X, Y) && !ellipse(25482.099762, 34851.042358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30273.016000, 34738.252000, 1658.136048, 558.945616, 123.918000, X, Y) && !ellipse(29260.054000, 33346.538000, 1610.872046, 1610.872046, 0.000000, X, Y) && !ellipse(28957.330000, 32813.466000, 1566.192045, 883.472025, 136.303700, X, Y) && !ellipse(30010.177887, 31949.528107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28611.480000, 32219.646000, 2449.664070, 384.068011, 123.711000, X, Y) && !ellipse(18436.491800, 31101.540400, 427.282412, 351.132010, 0.015564, X, Y) && !ellipse(27905.967881, 31159.683449, 1337.152038, 397.533567, 303.288179, X, Y) && !ellipse(27431.459891, 30440.782162, 1668.712048, 415.071931, 303.480892, X, Y) && !ellipse(26782.092600, 29458.351600, 1668.712048, 433.959212, 306.418000, X, Y) && !ellipse(26613.406000, 29330.288000, 1292.552037, 1292.552037, 0.000000, X, Y) && !ellipse(26113.190000, 28406.128000, 2457.168071, 2457.168071, 0.000000, X, Y) && !ellipse(25889.208000, 28154.128000, 1206.952035, 1206.952035, 0.000000, X, Y) && !ellipse(15686.272263, 16233.358307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24795.762000, 26622.528000, 1119.944032, 1119.944032, 0.000000, X, Y) && !ellipse(24192.394000, 25928.834000, 1115.336032, 1115.336032, 0.000000, X, Y) && !ellipse(17711.758270, 26645.318542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25873.294434, 22522.360718, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 04:09:14 2012] Writing fullrun_pn_xmm0100241001_pi300-10000_pass1_cl_src2.gif
[Fri Aug 24 04:10:02 2012] Mean detx,y = (167.85, -102.39) 
[Fri Aug 24 04:10:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 04:13:45 2012] grppha failed
[Fri Aug 24 04:13:45 2012] Setting source spectrum file to fullrun_pn_xmm0100241001_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Aug 24 04:13:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100241001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug 24 04:43:42 2012] Updating aperture counts using extracted products
[Fri Aug 24 04:43:42 2012] Error reading totcts from fullrun_pn_xmm0100241001_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Aug 24 04:43:42 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 04:43:45 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Aug 24 04:43:45 2012] Source 2 has no response, skipping
[Fri Aug 24 04:43:46 2012] xmm0100241001/analysis//spectral/fullrun_pn_xmm0100241001_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete