[Thu Aug 23 23:29:57 2012] Detection parameters:
  Position = (134.1, 381.4) = 23 50 32.35 36 31 60.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.1 +/- 12.3
  Background counts = 2.8
  Rate = 0.01 +/- 0.001

[Thu Aug 23 23:29:58 2012] Off-axis axis estimate = 13.35'
[Fri Aug 24 01:31:34 2012] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 01:31:34 2012] Initial guess for spatial extent in simple fitting = 13.10"
[Fri Aug 24 01:31:34 2012] source mask rpix=3.0, npix_max = 49, mask sum = 36, frac = 0.730
[Fri Aug 24 01:31:34 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.10"
[Fri Aug 24 01:54:20 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 24 01:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_src3.csv
[Fri Aug 24 01:54:20 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 24 01:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_src3.csv
[Fri Aug 24 01:54:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 01:54:20 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 24 01:54:20 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 24 01:54:20 2012] Fit fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 24 01:54:32 2012] Spatial fit model total counts = 113.796000, observed total counts = 114.000000
[Fri Aug 24 01:54:32 2012] Offset between fit and detection position for source 4 = 0.608621 pixels
[Fri Aug 24 01:54:32 2012] 114.238500 total counts/ 64.075000 bgd. counts: snr = 6.266767
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.608621 pixels
  Position = (134.5, 381.0) = 23 50 32.18 36 32 0.8
  Extent = 3.9 (3.3-5.0)", rotation angle = 0
  Source counts = 50.2 +/- 10.7
  Background counts = 64.1
  Rate = 0.006 +/- 0.001
[Fri Aug 24 01:54:32 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 01:54:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 01:54:32 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 01:54:32 2012] Source does appear to be extended
[Fri Aug 24 01:54:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 03:56:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 03:56:14 2012] Initial guess for spatial extent in simple fitting = 3.91"
[Fri Aug 24 03:56:14 2012] source mask rpix=0.9, npix_max = 7, mask sum = 5, frac = 0.640
[Fri Aug 24 03:56:14 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 3.91"
[Fri Aug 24 04:08:58 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 24 04:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_src3.csv
[Fri Aug 24 04:08:58 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 24 04:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_src3.csv
[Fri Aug 24 04:08:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 04:08:59 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 24 04:08:59 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 24 04:08:59 2012] Fit fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 24 04:09:08 2012] Spatial fit model total counts = 99.812600, observed total counts = 100.000000
[Fri Aug 24 04:09:08 2012] Offset between fit and detection position for source 4 = 0.005864 pixels
[Fri Aug 24 04:09:08 2012] 99.370400 total counts/ 49.145800 bgd. counts: snr = 7.164292
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.005864 pixels
  Position = (134.5, 381.0) = 23 50 32.19 36 32 0.8
  Extent = 3.9 (3.1-5.0)", rotation angle = 0
  Source counts = 50.2 +/- 10.0
  Background counts = 49.1
  Rate = 0.006 +/- 0.001
[Fri Aug 24 04:09:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 04:09:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 04:09:08 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 04:09:08 2012] Source does appear to be extended
[Fri Aug 24 04:09:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 04:39:19 2012] XMMSAS src. selection expression = ellipse(11653.524200, 33096.606200, 234.235613, 234.235613, 0.000000, X, Y)
[Fri Aug 24 04:39:19 2012] Writing source region out to fullrun_mos2_xmm0100241001_pi300-10000_pass1_cl_src4_src.reg
[Fri Aug 24 04:39:19 2012] Extracting stamp from image fullrun_mos2_xmm0100241001_pi300-10000_cl_sm2.00.img.gz, (121, 368) - (148, 394)
[Fri Aug 24 04:39:19 2012] XMMSAS bgd. selection expression = annulus(11653.524200, 33096.606200, 390.392689, 780.785378, X, Y)
[Fri Aug 24 04:39:19 2012] Writing fullrun_mos2_xmm0100241001_pi300-10000_pass1_cl_src4.gif
[Fri Aug 24 04:42:50 2012] Mean detx,y = (-14650.93, 393.13) 
[Fri Aug 24 04:42:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 04:42:57 2012] grppha failed
[Fri Aug 24 04:42:57 2012] Setting source spectrum file to fullrun_mos2_xmm0100241001_pi300-10000_pass1_cl_src4_src.pi.gz
[Fri Aug 24 04:42:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100241001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Aug 24 04:43:31 2012] Not generating rmf since there are only 50 counts
[Fri Aug 24 04:43:31 2012] rmf not generated due to insufficient counts
[Fri Aug 24 04:43:42 2012] Updating aperture counts using extracted products
[Fri Aug 24 04:43:42 2012] Error reading totcts from fullrun_mos2_xmm0100241001_pi300-10000_pass1_cl_src4_src.pi.gz
[Fri Aug 24 04:43:42 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 04:43:44 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 24 04:43:45 2012] xmm0100241001/analysis//spectral/fullrun_mos2_xmm0100241001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete