[Thu Aug 23 23:29:58 2012] Detection parameters:
  Position = (268.4, 299.1) = 23 49 43.86 36 26 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.5 +/- 12.0
  Background counts = 6.4
  Rate = 0.005 +/- 0.001

[Thu Aug 23 23:29:58 2012] Off-axis axis estimate = 2.18'
[Fri Aug 24 01:31:34 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 01:31:34 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Fri Aug 24 01:31:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.007
[Fri Aug 24 01:31:34 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.52"
[Fri Aug 24 01:54:20 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_src8.ximg exists
[Fri Aug 24 01:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_src8.csv
[Fri Aug 24 01:54:20 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Aug 24 01:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_src8.csv
[Fri Aug 24 01:54:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 01:54:20 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Aug 24 01:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Aug 24 01:54:20 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Aug 24 01:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Aug 24 01:54:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100241001_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 01:54:32 2012] Source 13 is offset by -6.562386 and 6.054879 pixels which is larger than
2 X fitted extent = 2.607756 x 2.607756, not incorporating fit results
[Fri Aug 24 01:54:32 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 01:54:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 01:54:32 2012] Assessing source extent using major
[Fri Aug 24 01:54:32 2012] Source does appear to be extended
[Fri Aug 24 01:54:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 03:56:14 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 03:56:14 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Fri Aug 24 03:56:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.007
[Fri Aug 24 03:56:14 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.52"
[Fri Aug 24 04:08:58 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_src7.ximg exists
[Fri Aug 24 04:08:58 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Aug 24 04:08:58 2012] Fit fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_src7 appears to have run properly
[Fri Aug 24 04:08:59 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Aug 24 04:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Aug 24 04:08:59 2012] fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Aug 24 04:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Aug 24 04:08:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100241001_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 04:09:08 2012] Source 13 is offset by -3.171397 and 1.663890 pixels which is larger than
2 X fitted extent = 0.684566 x 0.684566, not incorporating fit results
[Fri Aug 24 04:09:08 2012] Source 13 is offset by -6.562386 and 6.054879 pixels which is larger than
2 X fitted extent = 2.006740 x 3.901173, not incorporating fit results
[Fri Aug 24 04:09:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 04:09:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 04:09:08 2012] Assessing source extent using major
[Fri Aug 24 04:09:08 2012] Source does appear to be extended
[Fri Aug 24 04:09:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 04:39:19 2012] XMMSAS src. selection expression = ellipse(23298.128418, 25976.718445, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 24 04:39:19 2012] Writing source region out to fullrun_mos2_xmm0100241001_pi300-10000_pass1_cl_src13_src.reg
[Fri Aug 24 04:39:19 2012] Extracting stamp from image fullrun_mos2_xmm0100241001_pi300-10000_cl_sm2.00.img.gz, (231, 262) - (306, 337)
[Fri Aug 24 04:39:19 2012] XMMSAS bgd. selection expression = annulus(23298.128418, 25976.718445, 1087.500000, 2175.000000, X, Y) && !ellipse(24027.535800, 25282.434600, 1517.052044, 1341.703239, 34.896942, X, Y)
[Fri Aug 24 04:39:19 2012] Writing fullrun_mos2_xmm0100241001_pi300-10000_pass1_cl_src13.gif
[Fri Aug 24 04:43:21 2012] Mean detx,y = (-772.39, -229.35) 
[Fri Aug 24 04:43:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 04:43:30 2012] grppha failed
[Fri Aug 24 04:43:30 2012] Setting source spectrum file to fullrun_mos2_xmm0100241001_pi300-10000_pass1_cl_src13_src.pi.gz
[Fri Aug 24 04:43:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100241001_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Aug 24 04:43:31 2012] Not generating rmf since there are only 44 counts
[Fri Aug 24 04:43:31 2012] rmf not generated due to insufficient counts
[Fri Aug 24 04:43:42 2012] Updating aperture counts using extracted products
[Fri Aug 24 04:43:42 2012] Error reading totcts from fullrun_mos2_xmm0100241001_pi300-10000_pass1_cl_src13_src.pi.gz
[Fri Aug 24 04:43:42 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 04:43:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 04:43:45 2012] xmm0100241001/analysis//spectral/fullrun_mos2_xmm0100241001_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete