[Sat Sep  1 14:52:59 2012] Detection parameters:
  Position = (289.0, 276.9) = 15 32 23.31 -8 32 1.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73385.2 +/- 324.3
  Background counts = 51.8
  Rate = 3 +/- 0.01

[Sat Sep  1 14:53:00 2012] Off-axis axis estimate = 1.70'
[Sat Sep  1 14:55:05 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 14:55:05 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Sep  1 14:55:05 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sat Sep  1 14:55:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Sep  1 16:20:35 2012] fullrun_pn_xmm0100240801_pi300-10000_cl_pass0_src1.ximg exists
[Sat Sep  1 16:20:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240801_pi300-10000_cl_pass0_src1.csv
[Sat Sep  1 16:20:35 2012] fullrun_pn_xmm0100240801_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Sep  1 16:20:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240801_pi300-10000_cl_pass0_src1.csv
[Sat Sep  1 16:20:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 16:20:36 2012] fullrun_pn_xmm0100240801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep  1 16:20:36 2012] fullrun_pn_xmm0100240801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep  1 16:20:36 2012] Fit fullrun_pn_xmm0100240801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep  1 17:07:32 2012] Spatial fit model total counts = 63960.200000, observed total counts = 63954.000000
[Sat Sep  1 17:07:32 2012] Offset between fit and detection position for source 1 = 0.100942 pixels
[Sat Sep  1 17:07:32 2012] 63928.300000 total counts/ 12597.200000 bgd. counts: snr = 457.344603
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.100942 pixels
  Position = (289.0, 276.8) = 15 32 23.32 -8 32 1.4
  Extent = 5.9 (5.9-5.9)", rotation angle = 0
  Source counts = 51331.1 +/- 252.8
  Background counts = 12597.2
  Rate = 2 +/- 0.01
[Sat Sep  1 17:07:32 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 17:07:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 17:07:32 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 17:07:32 2012] Source does appear to be extended
[Sat Sep  1 17:07:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 17:07:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep  1 17:07:44 2012] Initial guess for spatial extent in simple fitting = 5.90"
[Sat Sep  1 17:07:44 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.162
[Sat Sep  1 17:07:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.90"
[Sat Sep  1 18:39:06 2012] fullrun_pn_xmm0100240801_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep  1 18:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240801_pi300-10000_cl_pass1_src1.csv
[Sat Sep  1 18:39:06 2012] fullrun_pn_xmm0100240801_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep  1 18:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240801_pi300-10000_cl_pass1_src1.csv
[Sat Sep  1 18:39:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 18:39:07 2012] fullrun_pn_xmm0100240801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep  1 18:39:07 2012] fullrun_pn_xmm0100240801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep  1 18:39:07 2012] Fit fullrun_pn_xmm0100240801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep  1 19:07:45 2012] Spatial fit model total counts = 63953.500000, observed total counts = 63954.000000
[Sat Sep  1 19:07:45 2012] Offset between fit and detection position for source 1 = 0.000020 pixels
[Sat Sep  1 19:07:45 2012] 63921.600000 total counts/ 12592.800000 bgd. counts: snr = 457.404000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000020 pixels
  Position = (289.0, 276.8) = 15 32 23.32 -8 32 1.4
  Extent = 5.9 (5.9-5.9)", rotation angle = 0
  Source counts = 51328.8 +/- 252.8
  Background counts = 12592.8
  Rate = 2 +/- 0.01
[Sat Sep  1 19:07:45 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 19:07:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 19:07:45 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 19:07:45 2012] Source does appear to be extended
[Sat Sep  1 19:07:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 19:07:56 2012] Counts = 51328.800000, rescaling region sizes by 3.000000
[Sat Sep  1 19:07:56 2012] XMMSAS src. selection expression = ellipse(25095.911916, 24031.550600, 1061.514031, 1061.514031, 0.000000, X, Y)
[Sat Sep  1 19:07:56 2012] Writing source region out to fullrun_pn_xmm0100240801_pi300-10000_pass1_cl_src1_src.reg
[Sat Sep  1 19:07:56 2012] Extracting stamp from image fullrun_pn_xmm0100240801_pi300-10000_cl_sm2.00.img.gz, (228, 216) - (350, 338)
[Sat Sep  1 19:07:56 2012] XMMSAS bgd. selection expression = annulus(25095.911916, 24031.550600, 5307.570153, 10615.140305, X, Y) && !ellipse(30305.888680, 26645.920000, 421.759212, 351.783210, 63.092208, X, Y) && !ellipse(33036.793800, 31072.165600, 467.837613, 467.837613, 0.000000, X, Y) && !ellipse(21543.937085, 35191.771697, 1705.576049, 412.184829, 71.337467, X, Y) && !ellipse(35453.226898, 34466.825104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21619.102200, 34889.986000, 1159.016033, 1159.016033, 0.000000, X, Y) && !ellipse(21717.486000, 34441.086000, 1330.768038, 1330.768038, 0.000000, X, Y) && !ellipse(22150.622600, 33217.278000, 1555.568045, 374.068811, 69.488000, X, Y) && !ellipse(28341.909466, 32796.311492, 689.078412, 389.629625, 3.545921, X, Y) && !ellipse(22392.826000, 32387.986000, 1213.248035, 1213.248035, 0.000000, X, Y) && !ellipse(22669.518600, 31628.900000, 925.808027, 925.808027, 0.000000, X, Y) && !ellipse(22775.901600, 31313.382600, 1446.912042, 464.148813, 72.853900, X, Y) && !ellipse(23019.139400, 30560.488000, 1393.000040, 1393.000040, 0.000000, X, Y) && !ellipse(23068.595000, 30383.114000, 895.880026, 895.880026, 0.000000, X, Y) && !ellipse(23289.748800, 29706.946000, 1074.184031, 1074.184031, 0.000000, X, Y) && !ellipse(23247.195800, 29514.184000, 1288.544037, 1288.544037, 0.000000, X, Y) && !ellipse(23636.146800, 28630.230000, 987.528028, 987.528028, 0.000000, X, Y) && !ellipse(23763.712600, 28264.162000, 1137.112033, 1137.112033, 0.000000, X, Y) && !ellipse(19924.545975, 27600.409576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24003.431800, 27568.744000, 891.016026, 891.016026, 0.000000, X, Y) && !ellipse(24074.538000, 26876.994000, 1137.472033, 1137.472033, 0.000000, X, Y) && !ellipse(16147.344650, 26768.708374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24327.199188, 26401.239044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29113.824000, 25676.040000, 1283.224037, 1283.224037, 0.000000, X, Y) && !ellipse(30193.819600, 25353.325800, 321.916009, 321.916009, 0.000000, X, Y) && !ellipse(16936.788406, 24414.817810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19198.922485, 24391.634094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26779.633200, 21392.001000, 341.351210, 341.351210, 0.000000, X, Y) && !ellipse(23598.425507, 21105.283966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24034.691956, 19601.508560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24381.144073, 18711.277237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21474.504800, 18679.163400, 766.343222, 766.343222, 0.000000, X, Y) && !ellipse(18668.697205, 17858.992920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22862.007066, 16399.513374, 687.394209, 371.194533, 3.788913, X, Y)
[Sat Sep  1 19:07:56 2012] Writing fullrun_pn_xmm0100240801_pi300-10000_pass1_cl_src1.gif
[Sat Sep  1 19:08:17 2012] Mean detx,y = (296.84, -67.12) 
[Sat Sep  1 19:08:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  1 19:11:21 2012] grppha failed
[Sat Sep  1 19:11:21 2012] Setting source spectrum file to fullrun_pn_xmm0100240801_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Sep  1 19:11:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100240801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Sep  1 19:43:03 2012] Updating aperture counts using extracted products
[Sat Sep  1 19:43:03 2012] Error reading totcts from fullrun_pn_xmm0100240801_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Sep  1 19:43:04 2012] No arf file for this source, not re-computing flux
[Sat Sep  1 19:43:07 2012] Source 1 has no response, skipping
[Sat Sep  1 19:43:08 2012] xmm0100240801/analysis//spectral/fullrun_pn_xmm0100240801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete