[Sat Sep  1 14:53:15 2012] Detection parameters:
  Position = (289.0, 276.9) = 15 32 23.33 -8 32 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26458.9 +/- 194.9
  Background counts = 15.6
  Rate = 1 +/- 0.007

[Sat Sep  1 14:53:15 2012] Off-axis axis estimate = 1.71'
[Sat Sep  1 16:20:37 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 16:20:37 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Sep  1 16:20:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sat Sep  1 16:20:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Sep  1 16:36:44 2012] fullrun_mos1_xmm0100240801_pi300-10000_cl_pass0_src1.ximg exists
[Sat Sep  1 16:36:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0100240801_pi300-10000_cl_pass0_src1.csv
[Sat Sep  1 16:36:44 2012] fullrun_mos1_xmm0100240801_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Sep  1 16:36:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0100240801_pi300-10000_cl_pass0_src1.csv
[Sat Sep  1 16:36:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 16:36:44 2012] fullrun_mos1_xmm0100240801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep  1 16:36:44 2012] fullrun_mos1_xmm0100240801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep  1 16:36:44 2012] Fit fullrun_mos1_xmm0100240801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep  1 17:07:34 2012] Spatial fit model total counts = 23222.400000, observed total counts = 23215.000000
[Sat Sep  1 17:07:34 2012] Offset between fit and detection position for source 1 = 0.101653 pixels
[Sat Sep  1 17:07:34 2012] 23183.770000 total counts/ 4742.170000 bgd. counts: snr = 267.799671
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.101653 pixels
  Position = (288.9, 276.8) = 15 32 23.35 -8 32 1.4
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 18441.6 +/- 152.3
  Background counts = 4742.2
  Rate = 0.7 +/- 0.006
[Sat Sep  1 17:07:34 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 17:07:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 17:07:34 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 17:07:34 2012] Source does appear to be extended
[Sat Sep  1 17:07:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 18:39:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep  1 18:39:08 2012] Initial guess for spatial extent in simple fitting = 5.73"
[Sat Sep  1 18:39:08 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.213
[Sat Sep  1 18:39:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.73"
[Sat Sep  1 18:45:10 2012] fullrun_mos1_xmm0100240801_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep  1 18:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240801_pi300-10000_cl_pass1_src1.csv
[Sat Sep  1 18:45:10 2012] fullrun_mos1_xmm0100240801_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep  1 18:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240801_pi300-10000_cl_pass1_src1.csv
[Sat Sep  1 18:45:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 18:45:10 2012] fullrun_mos1_xmm0100240801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep  1 18:45:10 2012] fullrun_mos1_xmm0100240801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep  1 18:45:10 2012] Fit fullrun_mos1_xmm0100240801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep  1 19:07:46 2012] Spatial fit model total counts = 23222.400000, observed total counts = 23215.000000
[Sat Sep  1 19:07:46 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Sat Sep  1 19:07:46 2012] 23183.770000 total counts/ 4742.170000 bgd. counts: snr = 267.799671
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (288.9, 276.8) = 15 32 23.35 -8 32 1.4
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 18441.6 +/- 152.3
  Background counts = 4742.2
  Rate = 0.7 +/- 0.006
[Sat Sep  1 19:07:46 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 19:07:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 19:07:46 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 19:07:46 2012] Source does appear to be extended
[Sat Sep  1 19:07:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 19:34:16 2012] Counts = 18441.600000, rescaling region sizes by 3.000000
[Sat Sep  1 19:34:16 2012] XMMSAS src. selection expression = ellipse(25087.539620, 24032.171800, 1030.624151, 1030.624151, 0.000000, X, Y)
[Sat Sep  1 19:34:16 2012] Writing source region out to fullrun_mos1_xmm0100240801_pi300-10000_pass1_cl_src1_src.reg
[Sat Sep  1 19:34:16 2012] Extracting stamp from image fullrun_mos1_xmm0100240801_pi300-10000_cl_sm2.00.img.gz, (230, 218) - (348, 336)
[Sat Sep  1 19:34:16 2012] XMMSAS bgd. selection expression = annulus(25087.539620, 24032.171800, 5153.120755, 10306.241511, X, Y) && !ellipse(33031.438260, 31066.797600, 484.413614, 484.413614, 0.000000, X, Y) && !ellipse(30304.240080, 26628.791200, 375.762411, 375.762411, 0.000000, X, Y) && !ellipse(30182.428000, 25370.759400, 318.132809, 318.132809, 0.000000, X, Y)
[Sat Sep  1 19:34:16 2012] Writing fullrun_mos1_xmm0100240801_pi300-10000_pass1_cl_src1.gif
[Sat Sep  1 19:34:20 2012] Mean detx,y = (143.94, -7.86) 
[Sat Sep  1 19:34:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  1 19:37:40 2012] grppha failed
[Sat Sep  1 19:37:40 2012] Setting source spectrum file to fullrun_mos1_xmm0100240801_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Sep  1 19:37:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100240801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Sep  1 19:43:04 2012] Updating aperture counts using extracted products
[Sat Sep  1 19:43:04 2012] Error reading totcts from fullrun_mos1_xmm0100240801_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Sep  1 19:43:04 2012] No arf file for this source, not re-computing flux
[Sat Sep  1 19:43:05 2012] Source 1 has no response, skipping
[Sat Sep  1 19:43:06 2012] xmm0100240801/analysis//spectral/fullrun_mos1_xmm0100240801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete