[Thu May 30 10:37:22 2013] Detection parameters:
  Position = (306.4, 320.0) = 15 32 23.14 -8 32 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13949.8 +/- 139.5
  Background counts = 26.2
  Rate = 0.6 +/- 0.006

[Thu May 30 10:37:23 2013] Off-axis axis estimate = 1.67'
[Thu May 30 11:59:21 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu May 30 11:59:21 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Thu May 30 11:59:21 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Thu May 30 11:59:21 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu May 30 12:19:58 2013] fullrun_mos2_xmm0100240701_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 30 12:19:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240701_pi300-10000_cl_pass0_src1.csv
[Thu May 30 12:19:58 2013] fullrun_mos2_xmm0100240701_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 30 12:19:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240701_pi300-10000_cl_pass0_src1.csv
[Thu May 30 12:19:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 12:19:58 2013] fullrun_mos2_xmm0100240701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 30 12:19:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May 30 12:19:58 2013] fullrun_mos2_xmm0100240701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 30 12:19:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May 30 12:19:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 12:20:14 2013] Warning, spatial fit 1 centroid is now closest to src. 10
[Thu May 30 12:20:14 2013] Vigneting correction estimate = 1.000000
[Thu May 30 12:20:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 12:20:14 2013] Assessing source extent using major
[Thu May 30 12:20:14 2013] Source does appear to be extended
[Thu May 30 12:20:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 13:44:52 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu May 30 13:44:52 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Thu May 30 13:44:52 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Thu May 30 13:44:52 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.26"
[Thu May 30 14:06:50 2013] fullrun_mos2_xmm0100240701_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 30 14:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240701_pi300-10000_cl_pass1_src1.csv
[Thu May 30 14:06:50 2013] fullrun_mos2_xmm0100240701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 30 14:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240701_pi300-10000_cl_pass1_src1.csv
[Thu May 30 14:06:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 14:06:50 2013] fullrun_mos2_xmm0100240701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 30 14:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May 30 14:06:50 2013] fullrun_mos2_xmm0100240701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 30 14:06:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May 30 14:06:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240701_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 14:07:02 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.443729 pixels away
[Thu May 30 14:07:02 2013] Vigneting correction estimate = 1.000000
[Thu May 30 14:07:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 14:07:02 2013] Assessing source extent using major
[Thu May 30 14:07:02 2013] Source does appear to be extended
[Thu May 30 14:07:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 15:51:21 2013] Counts = 13949.849609, rescaling region sizes by 3.000000
[Thu May 30 15:51:21 2013] XMMSAS src. selection expression = ellipse(26607.202942, 27790.191071, 1957.500000, 1957.500000, 0.000000, X, Y)
[Thu May 30 15:51:21 2013] Writing source region out to fullrun_mos2_xmm0100240701_pi300-10000_pass1_cl_src1_src.reg
[Thu May 30 15:51:21 2013] Extracting stamp from image fullrun_mos2_xmm0100240701_pi300-10000_cl_sm2.00.img.gz, (194, 207) - (419, 432)
[Thu May 30 15:51:21 2013] XMMSAS bgd. selection expression = annulus(26607.202942, 27790.191071, 9787.500000, 19575.000000, X, Y) && !ellipse(31805.276200, 30374.423000, 473.277614, 292.696808, 16.852583, X, Y) && !ellipse(34516.181200, 34800.986200, 621.270418, 361.184010, 15.647623, X, Y) && !ellipse(29869.456024, 36576.646790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27378.778351, 27452.200531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25751.619751, 14831.575851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29023.572640, 14588.251800, 350.361610, 350.361610, 0.000000, X, Y) && !ellipse(31822.591156, 14134.278870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31674.204000, 29117.736800, 429.078412, 157.617605, 90.000000, X, Y) && !ellipse(22969.395200, 22508.991600, 434.872813, 434.872813, 0.000000, X, Y) && !ellipse(27139.000000, 28729.566986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28318.230440, 25117.111800, 373.434701, 373.434701, 0.000000, X, Y) && !ellipse(17576.766800, 30455.546000, 260.749608, 75.988402, 104.319636, X, Y) && !ellipse(41245.730865, 22803.661072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40827.714620, 26600.972400, 245.509607, 245.509607, 0.000000, X, Y)
[Thu May 30 15:51:21 2013] Writing fullrun_mos2_xmm0100240701_pi300-10000_pass1_cl_src1.gif
[Thu May 30 15:51:29 2013] Mean detx,y = (65.37, -4.33) 
[Thu May 30 15:51:33 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:02:01 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:02:01 2013] Setting source spectrum file to fullrun_mos2_xmm0100240701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 30 16:02:01 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0100240701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 30 16:06:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 16:06:16 2013] rmf not generated due to insufficient counts
[Thu May 30 16:13:42 2013] Updating aperture counts using extracted products
[Thu May 30 16:13:42 2013] Total counts from fullrun_mos2_xmm0100240701_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 12254.00
[Thu May 30 16:13:42 2013] Total counts from fullrun_mos2_xmm0100240701_pi300-10000_pass1_cl_src1_bgd.pi.gz = 18544.00
[Thu May 30 16:13:42 2013] Got source and background scale factors 11402380.000000, 560100018.000000
[Thu May 30 16:13:42 2013] User source parameters:
  Position = (306.4, 320.0) = 15 32 23.14 -8 32 0.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 11876.5 +/- 111.7
  Background aperture counts = 377.5
  Rate = 0.6 +/- 0.006

[Thu May 30 16:13:42 2013] Updating counts from extracted products
[Thu May 30 16:13:42 2013] Set source signif. to 11876.49/19.43 = 611.25
[Thu May 30 16:13:45 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 16:13:45 2013] Using photon index=1.80, rate=0.607, arf fullrun_mos2_xmm0100240701_pi300-10000_pass1_cl_src1.arf
[Thu May 30 16:13:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 16:13:46 2013] Updating source flux to 5.7e-12
[Thu May 30 16:13:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 16:13:52 2013] xmm0100240701/analysis//spectral/fullrun_mos2_xmm0100240701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete