[Sun Jun 9 01:08:01 2013] Detection parameters: Position = (397.7, 226.6) = 5 14 39.71 47 3 47.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 179.7 +/- 21.4 Background counts = 168.7 Rate = 0.01 +/- 0.001 [Sun Jun 9 01:08:01 2013] Off-axis axis estimate = 8.88' [Sun Jun 9 01:11:54 2013] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 01:11:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Jun 9 01:11:54 2013] Initial guess for spatial extent in simple fitting = 10.87" [Sun Jun 9 01:11:54 2013] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.917 [Sun Jun 9 01:11:54 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.87" [Sun Jun 9 01:15:56 2013] fullrun_pn_xmm0100240401_pi300-10000_cl_pass0_src1.ximg exists [Sun Jun 9 01:15:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240401_pi300-10000_cl_pass0_src1.csv [Sun Jun 9 01:15:56 2013] fullrun_pn_xmm0100240401_pi300-10000_cl_pass0_src1_1.ximg exists [Sun Jun 9 01:15:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240401_pi300-10000_cl_pass0_src1.csv [Sun Jun 9 01:15:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100240401_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100240401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 01:15:56 2013] fullrun_pn_xmm0100240401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sun Jun 9 01:15:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240401_pi300-10000_cl_pass0_tfrozen_src1.csv [Sun Jun 9 01:15:56 2013] fullrun_pn_xmm0100240401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sun Jun 9 01:15:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240401_pi300-10000_cl_pass0_tfrozen_src1.csv [Sun Jun 9 01:15:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100240401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100240401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 01:56:36 2013] Spatial fit model total counts = 417.258000, observed total counts = 293.000000 [Sun Jun 9 01:56:36 2013] Poor agreement between spatial fit and data for source 1 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 9 01:56:36 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 01:56:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 01:56:36 2013] Assessing source extent using major [Sun Jun 9 01:56:36 2013] Source does appear to be extended [Sun Jun 9 01:56:36 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 01:56:50 2013] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 01:56:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Jun 9 01:56:50 2013] Initial guess for spatial extent in simple fitting = 10.87" [Sun Jun 9 01:56:50 2013] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.917 [Sun Jun 9 01:56:50 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.87" [Sun Jun 9 02:02:46 2013] fullrun_pn_xmm0100240401_pi300-10000_cl_pass1_src1.ximg exists [Sun Jun 9 02:02:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240401_pi300-10000_cl_pass1_src1.csv [Sun Jun 9 02:02:46 2013] fullrun_pn_xmm0100240401_pi300-10000_cl_pass1_src1_1.ximg exists [Sun Jun 9 02:02:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240401_pi300-10000_cl_pass1_src1.csv [Sun Jun 9 02:02:46 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100240401_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100240401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 02:02:46 2013] fullrun_pn_xmm0100240401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sun Jun 9 02:02:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240401_pi300-10000_cl_pass1_tfrozen_src1.csv [Sun Jun 9 02:02:46 2013] fullrun_pn_xmm0100240401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sun Jun 9 02:02:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240401_pi300-10000_cl_pass1_tfrozen_src1.csv [Sun Jun 9 02:02:46 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100240401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100240401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 02:23:11 2013] Source 1 is offset by 5.282117 and 6.237278 pixels which is larger than 2 X fitted extent = 2.342713 x 1.249416, not incorporating fit results [Sun Jun 9 02:23:11 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 02:23:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 02:23:11 2013] Assessing source extent using major [Sun Jun 9 02:23:11 2013] Source does appear to be extended [Sun Jun 9 02:23:11 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 02:23:21 2013] XMMSAS src. selection expression = ellipse(34550.992188, 19666.623154, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 02:23:21 2013] Writing source region out to fullrun_pn_xmm0100240401_pi300-10000_pass1_cl_src1_src.reg [Sun Jun 9 02:23:21 2013] Extracting stamp from image fullrun_pn_xmm0100240401_pi300-10000_cl_sm2.00.img.gz, (360, 189) - (435, 264) [Sun Jun 9 02:23:21 2013] XMMSAS bgd. selection expression = annulus(34550.992188, 19666.623154, 1087.500000, 2175.000000, X, Y) [Sun Jun 9 02:23:21 2013] Writing fullrun_pn_xmm0100240401_pi300-10000_pass1_cl_src1.gif [Sun Jun 9 02:23:29 2013] Mean detx,y = (8060.57, 7010.22) [Sun Jun 9 02:23:33 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 02:23:56 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 02:23:57 2013] Setting source spectrum file to fullrun_pn_xmm0100240401_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sun Jun 9 02:23:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0100240401_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sun Jun 9 02:26:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 9 02:26:53 2013] rmf not generated due to insufficient counts [Sun Jun 9 02:44:15 2013] Updating aperture counts using extracted products [Sun Jun 9 02:44:15 2013] Total counts from fullrun_pn_xmm0100240401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 132.00 [Sun Jun 9 02:44:15 2013] Total counts from fullrun_pn_xmm0100240401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1167.00 [Sun Jun 9 02:44:15 2013] Got source and background scale factors 923091.000000, 10125171.000000 [Sun Jun 9 02:44:15 2013] User source parameters: Position = (397.7, 226.6) = 5 14 39.71 47 3 47.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 25.6 +/- 12.5 Background aperture counts = 106.4 Rate = 0.009 +/- 0.005 [Sun Jun 9 02:44:15 2013] Updating counts from extracted products [Sun Jun 9 02:44:15 2013] Set source signif. to 25.61/10.31 = 2.48 [Sun Jun 9 02:44:16 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 02:44:16 2013] Using photon index=1.80, rate=0.00948, arf fullrun_pn_xmm0100240401_pi300-10000_pass1_cl_src1.arf [Sun Jun 9 02:44:16 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 02:44:16 2013] Updating source flux to 7.7e-14 [Sun Jun 9 02:44:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 02:44:24 2013] xmm0100240401/analysis//spectral/fullrun_pn_xmm0100240401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete