[Sun May  5 12:16:37 2013] Detection parameters:
  Position = (330.3, 318.7) = 13 30 34.57 24 17 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.6 +/- 13.9
  Background counts = 49.5
  Rate = 0.003 +/- 0.0006

[Sun May  5 12:16:37 2013] Off-axis axis estimate = 2.74'
[Sun May  5 12:17:10 2013] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:10 2013] Initial guess for spatial extent in simple fitting = 7.80"
[Sun May  5 12:17:10 2013] source mask rpix=1.8, npix_max = 21, mask sum = 24, frac = 1.141
[Sun May  5 12:17:10 2013] Giving source the simple spatial ID 71 for pass 0, mean size = 7.80"
[Sun May  5 12:17:12 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src71.ximg exists
[Sun May  5 12:17:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src71.csv
[Sun May  5 12:17:12 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src71_1.ximg exists
[Sun May  5 12:17:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src71.csv
[Sun May  5 12:17:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:14 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sun May  5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src71.csv
[Sun May  5 12:17:14 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sun May  5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src71.csv
[Sun May  5 12:17:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:35 2013] Spatial fit model total counts = 377.529000, observed total counts = 314.000000
[Sun May  5 12:17:35 2013] Poor agreement between spatial fit and data for source 73
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 12:17:35 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:35 2013] Assessing source extent using major
[Sun May  5 12:17:35 2013] Source does appear to be extended
[Sun May  5 12:17:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:01 2013] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:01 2013] Initial guess for spatial extent in simple fitting = 7.80"
[Sun May  5 12:18:01 2013] source mask rpix=1.8, npix_max = 21, mask sum = 24, frac = 1.141
[Sun May  5 12:18:01 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 7.80"
[Sun May  5 12:18:02 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src69.ximg exists
[Sun May  5 12:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src69.csv
[Sun May  5 12:18:02 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src69_1.ximg exists
[Sun May  5 12:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src69.csv
[Sun May  5 12:18:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:03 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Sun May  5 12:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src69.csv
[Sun May  5 12:18:03 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Sun May  5 12:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src69.csv
[Sun May  5 12:18:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:20 2013] Spatial fit model total counts = 377.556000, observed total counts = 314.000000
[Sun May  5 12:18:20 2013] Poor agreement between spatial fit and data for source 73
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 12:18:20 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:20 2013] Assessing source extent using major
[Sun May  5 12:18:20 2013] Source does appear to be extended
[Sun May  5 12:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:45 2013] XMMSAS src. selection expression = ellipse(28690.402649, 27676.850525, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 12:18:45 2013] Not overwriting source region fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src73_src.reg
[Sun May  5 12:18:45 2013] Extracting stamp from image fullrun_pn_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (293, 281) - (368, 356)
[Sun May  5 12:18:45 2013] XMMSAS bgd. selection expression = annulus(28690.402649, 27676.850525, 1087.500000, 2175.000000, X, Y) && !ellipse(30891.119263, 25700.937897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31650.877136, 27862.500793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30810.035600, 28667.821000, 378.800811, 378.800811, 0.000000, X, Y) && !ellipse(26080.500885, 29529.968048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26934.664333, 29219.093292, 1224.880035, 345.049002, 71.201983, X, Y) && !ellipse(31394.908417, 29464.617157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27057.517151, 28933.544922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29640.249800, 25428.745200, 329.244809, 329.244809, 0.000000, X, Y)
[Sun May  5 12:18:45 2013] Writing fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src73.gif
[Sun May  5 12:46:32 2013] Mean detx,y = (-4324.97, 2235.85) 
[Sun May  5 12:46:35 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 12:46:53 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 12:46:54 2013] Setting source spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Sun May  5 12:46:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Sun May  5 14:13:48 2013] Not generating rmf since there are only 75 counts
[Sun May  5 14:13:48 2013] rmf not generated due to insufficient counts
[Sun May  5 14:28:48 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:48 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src73_src_b10.pi.gz = 246.00
[Sun May  5 14:28:48 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src73_bgd.pi.gz = 1441.00
[Sun May  5 14:28:48 2013] Got source and background scale factors 1114239.000000, 8935814.000000
[Sun May  5 14:28:48 2013] User source parameters:
  Position = (330.3, 318.7) = 13 30 34.57 24 17 2.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 66.3 +/- 16.7
  Background aperture counts = 179.7
  Rate = 0.002 +/- 0.0005

[Sun May  5 14:28:48 2013] Updating counts from extracted products
[Sun May  5 14:28:48 2013] Set source signif. to 66.32/13.40 = 4.95
[Sun May  5 14:28:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:28:51 2013] Using photon index=1.80, rate=0.00198, arf fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src73.arf
[Sun May  5 14:28:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:28:51 2013] Updating source flux to 7.1e-15
[Sun May  5 14:29:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 14:29:33 2013] xmm0100240201/analysis//spectral/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src73_pl.csv not found, spectral fit skipped or did not complete