[Sun May 5 12:16:37 2013] Detection parameters: Position = (311.6, 333.1) = 13 30 40.54 24 18 2.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 95.0 +/- 15.2 Background counts = 48.9 Rate = 0.004 +/- 0.0006 [Sun May 5 12:16:37 2013] Off-axis axis estimate = 2.69' [Sun May 5 12:17:10 2013] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting [Sun May 5 12:17:10 2013] Initial guess for spatial extent in simple fitting = 7.77" [Sun May 5 12:17:10 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.956 [Sun May 5 12:17:10 2013] Giving source the simple spatial ID 69 for pass 0, mean size = 7.77" [Sun May 5 12:17:12 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src69.ximg exists [Sun May 5 12:17:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src69.csv [Sun May 5 12:17:12 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src69_1.ximg exists [Sun May 5 12:17:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src69.csv [Sun May 5 12:17:12 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src69_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:17:14 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src69.ximg exists [Sun May 5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src69.csv [Sun May 5 12:17:14 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists [Sun May 5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src69.csv [Sun May 5 12:17:14 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src69_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:17:35 2013] Spatial fit model total counts = 505.902000, observed total counts = 454.000000 [Sun May 5 12:17:35 2013] Poor agreement between spatial fit and data for source 71 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 5 12:17:35 2013] Vigneting correction estimate = 1.000000 [Sun May 5 12:17:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 12:17:35 2013] Assessing source extent using major [Sun May 5 12:17:35 2013] Source does appear to be extended [Sun May 5 12:17:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 12:17:35 2013] Source is confused with source 57 [Sun May 5 12:18:01 2013] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting [Sun May 5 12:18:01 2013] Initial guess for spatial extent in simple fitting = 7.77" [Sun May 5 12:18:01 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.956 [Sun May 5 12:18:01 2013] Giving source the simple spatial ID 67 for pass 1, mean size = 7.77" [Sun May 5 12:18:02 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src67.ximg exists [Sun May 5 12:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src67.csv [Sun May 5 12:18:02 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src67_1.ximg exists [Sun May 5 12:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src67.csv [Sun May 5 12:18:02 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src67_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:18:03 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src67.ximg exists [Sun May 5 12:18:03 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists [Sun May 5 12:18:03 2013] Fit fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly [Sun May 5 12:18:20 2013] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 71 at 11.772036 pixels away [Sun May 5 12:18:20 2013] Warning, spatial fit 67 centroid is now closest to src. 57 [Sun May 5 12:18:20 2013] Vigneting correction estimate = 1.000000 [Sun May 5 12:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 12:18:20 2013] Assessing source extent using major [Sun May 5 12:18:20 2013] Source does appear to be extended [Sun May 5 12:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 12:18:45 2013] XMMSAS src. selection expression = ellipse(27057.517151, 28933.544922, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 12:18:45 2013] Not overwriting source region fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src71_src.reg [Sun May 5 12:18:45 2013] Extracting stamp from image fullrun_pn_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (274, 296) - (349, 371) [Sun May 5 12:18:45 2013] XMMSAS bgd. selection expression = annulus(27057.517151, 28933.544922, 1087.500000, 2175.000000, X, Y) && !ellipse(26080.500885, 29529.968048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24345.310000, 26797.413000, 616.806418, 616.806418, 0.000000, X, Y) && !ellipse(26934.664333, 29219.093292, 1224.880035, 345.049002, 71.201983, X, Y) && !ellipse(23983.492760, 28158.665400, 1224.880035, 390.664011, 70.499200, X, Y) && !ellipse(23732.514147, 28938.010270, 1264.784036, 337.372512, 72.570351, X, Y) && !ellipse(28690.402649, 27676.850525, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 12:18:45 2013] Writing fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src71.gif [Sun May 5 12:45:11 2013] Mean detx,y = (-3051.22, 4100.81) [Sun May 5 12:45:13 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 12:45:29 2013] Binned source spectrum to 10 counts/bin [Sun May 5 12:45:29 2013] Setting source spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src71_src_b10.pi.gz [Sun May 5 12:45:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src71_bgd.pi.gz [Sun May 5 14:11:18 2013] Not generating rmf since there are only 94 counts [Sun May 5 14:11:18 2013] rmf not generated due to insufficient counts [Sun May 5 14:28:47 2013] Updating aperture counts using extracted products [Sun May 5 14:28:47 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src71_src_b10.pi.gz = 353.00 [Sun May 5 14:28:47 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src71_bgd.pi.gz = 1065.00 [Sun May 5 14:28:47 2013] Got source and background scale factors 1318332.000000, 7525320.000000 [Sun May 5 14:28:47 2013] User source parameters: Position = (311.6, 333.1) = 13 30 40.54 24 18 2.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 166.4 +/- 19.8 Background aperture counts = 186.6 Rate = 0.005 +/- 0.0006 [Sun May 5 14:28:47 2013] Updating counts from extracted products [Sun May 5 14:28:47 2013] Set source signif. to 166.43/13.66 = 12.18 [Sun May 5 14:28:51 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 14:28:51 2013] Using photon index=1.80, rate=0.00498, arf fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src71.arf [Sun May 5 14:28:51 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 14:28:51 2013] Updating source flux to 1.7e-14 [Sun May 5 14:29:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 14:29:33 2013] xmm0100240201/analysis//spectral/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src71_pl.csv not found, spectral fit skipped or did not complete