[Sun May 5 12:16:37 2013] Detection parameters: Position = (361.4, 339.2) = 13 30 24.68 24 18 29.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 52.0 +/- 11.0 Background counts = 46.9 Rate = 0.001 +/- 0.0003 [Sun May 5 12:16:37 2013] Off-axis axis estimate = 5.44' [Sun May 5 12:17:10 2013] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting [Sun May 5 12:17:10 2013] Initial guess for spatial extent in simple fitting = 9.15" [Sun May 5 12:17:10 2013] source mask rpix=2.1, npix_max = 27, mask sum = 17, frac = 0.627 [Sun May 5 12:17:10 2013] Giving source the simple spatial ID 68 for pass 0, mean size = 9.15" [Sun May 5 12:17:12 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src68.ximg exists [Sun May 5 12:17:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src68.csv [Sun May 5 12:17:12 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src68_1.ximg exists [Sun May 5 12:17:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src68.csv [Sun May 5 12:17:12 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src68_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:17:14 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src68.ximg exists [Sun May 5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src68.csv [Sun May 5 12:17:14 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists [Sun May 5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src68.csv [Sun May 5 12:17:14 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:17:35 2013] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 70 at 10.248913 pixels away [Sun May 5 12:17:35 2013] Vigneting correction estimate = 1.000000 [Sun May 5 12:17:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 12:17:35 2013] Assessing source extent using major [Sun May 5 12:17:35 2013] Source does appear to be extended [Sun May 5 12:17:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 12:18:01 2013] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting [Sun May 5 12:18:01 2013] Initial guess for spatial extent in simple fitting = 9.15" [Sun May 5 12:18:01 2013] source mask rpix=2.1, npix_max = 27, mask sum = 17, frac = 0.627 [Sun May 5 12:18:01 2013] Giving source the simple spatial ID 66 for pass 1, mean size = 9.15" [Sun May 5 12:18:02 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src66.ximg exists [Sun May 5 12:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src66.csv [Sun May 5 12:18:02 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src66_1.ximg exists [Sun May 5 12:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src66.csv [Sun May 5 12:18:02 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src66_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:18:03 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src66.ximg exists [Sun May 5 12:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src66.csv [Sun May 5 12:18:03 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists [Sun May 5 12:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src66.csv [Sun May 5 12:18:03 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src66_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:18:20 2013] Spatial fit model total counts = 454.770000, observed total counts = 333.000000 [Sun May 5 12:18:20 2013] Poor agreement between spatial fit and data for source 70 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 5 12:18:20 2013] Vigneting correction estimate = 1.000000 [Sun May 5 12:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 12:18:20 2013] Assessing source extent using major [Sun May 5 12:18:20 2013] Source does appear to be extended [Sun May 5 12:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 12:18:45 2013] XMMSAS src. selection expression = ellipse(31394.908417, 29464.617157, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 12:18:45 2013] Not overwriting source region fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src70_src.reg [Sun May 5 12:18:45 2013] Extracting stamp from image fullrun_pn_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (324, 302) - (399, 377) [Sun May 5 12:18:45 2013] XMMSAS bgd. selection expression = annulus(31394.908417, 29464.617157, 1087.500000, 2175.000000, X, Y) && !ellipse(31650.877136, 27862.500793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30810.035600, 28667.821000, 378.800811, 378.800811, 0.000000, X, Y) && !ellipse(28690.402649, 27676.850525, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 12:18:45 2013] Writing fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src70.gif [Sun May 5 12:44:40 2013] Mean detx,y = (-7208.57, 3157.43) [Sun May 5 12:44:42 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 12:44:59 2013] Binned source spectrum to 10 counts/bin [Sun May 5 12:44:59 2013] Setting source spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src70_src_b10.pi.gz [Sun May 5 12:44:59 2013] Setting bgd. spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src70_bgd.pi.gz [Sun May 5 14:11:05 2013] Not generating rmf since there are only 51 counts [Sun May 5 14:11:05 2013] rmf not generated due to insufficient counts [Sun May 5 14:28:47 2013] Updating aperture counts using extracted products [Sun May 5 14:28:47 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src70_src_b10.pi.gz = 213.00 [Sun May 5 14:28:47 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src70_bgd.pi.gz = 1272.00 [Sun May 5 14:28:47 2013] Got source and background scale factors 1117796.000000, 8977327.000000 [Sun May 5 14:28:47 2013] User source parameters: Position = (361.4, 339.2) = 13 30 24.68 24 18 29.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 54.6 +/- 15.6 Background aperture counts = 158.4 Rate = 0.002 +/- 0.0005 [Sun May 5 14:28:47 2013] Updating counts from extracted products [Sun May 5 14:28:47 2013] Set source signif. to 54.62/12.58 = 4.34 [Sun May 5 14:28:51 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 14:28:51 2013] Using photon index=1.80, rate=0.00163, arf fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src70.arf [Sun May 5 14:28:51 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 14:28:51 2013] Updating source flux to 8e-15 [Sun May 5 14:29:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 14:29:33 2013] xmm0100240201/analysis//spectral/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src70_pl.csv not found, spectral fit skipped or did not complete