[Sun May  5 12:16:37 2013] Detection parameters:
  Position = (261.4, 395.9) = 13 30 56.51 24 22 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.7 +/- 12.7
  Background counts = 37.9
  Rate = 0.003 +/- 0.0007

[Sun May  5 12:16:37 2013] Off-axis axis estimate = 7.56'
[Sun May  5 12:17:10 2013] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:10 2013] Initial guess for spatial extent in simple fitting = 10.21"
[Sun May  5 12:17:10 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.925
[Sun May  5 12:17:10 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 10.21"
[Sun May  5 12:17:12 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src65.ximg exists
[Sun May  5 12:17:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src65.csv
[Sun May  5 12:17:12 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src65_1.ximg exists
[Sun May  5 12:17:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src65.csv
[Sun May  5 12:17:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:14 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sun May  5 12:17:14 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sun May  5 12:17:14 2013] Fit fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Sun May  5 12:17:35 2013] Spatial fit model total counts = 582.727000, observed total counts = 581.000000
[Sun May  5 12:17:35 2013] Offset between fit and detection position for source 67 = 8.002264 pixels
[Sun May  5 12:17:35 2013] 403.182300 total counts/ 304.182000 bgd. counts: snr = 5.676358
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 8.002264 pixels
  Position = (269.3, 396.9) = 13 30 53.99 24 22 41.2
  Extent = 20.4 (20.4-40.8)", rotation angle = 0
  Source counts = 99.0 +/- 20.1
  Background counts = 304.2
  Rate = 0.003 +/- 0.0006
[Sun May  5 12:17:35 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:35 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:17:35 2013] Source does appear to be extended
[Sun May  5 12:17:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:17:35 2013] Source is confused with source 36
[Sun May  5 12:18:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:01 2013] Initial guess for spatial extent in simple fitting = 20.42"
[Sun May  5 12:18:01 2013] source mask rpix=4.7, npix_max = 107, mask sum = 110, frac = 1.020
[Sun May  5 12:18:01 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 20.42"
[Sun May  5 12:18:02 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src63.ximg exists
[Sun May  5 12:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src63.csv
[Sun May  5 12:18:02 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src63_1.ximg exists
[Sun May  5 12:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src63.csv
[Sun May  5 12:18:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:03 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Sun May  5 12:18:03 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Sun May  5 12:18:03 2013] Fit fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Sun May  5 12:18:20 2013] Warning, spatial fit 63 centroid is now closest to src. 54
[Sun May  5 12:18:20 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:20 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:18:20 2013] Source does appear to be extended
[Sun May  5 12:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:45 2013] XMMSAS src. selection expression = ellipse(23383.394000, 34479.668400, 1225.038035, 1225.038035, 0.000000, X, Y)
[Sun May  5 12:18:45 2013] Not overwriting source region fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src67_src.reg
[Sun May  5 12:18:45 2013] Extracting stamp from image fullrun_pn_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (199, 326) - (340, 467)
[Sun May  5 12:18:45 2013] XMMSAS bgd. selection expression = annulus(23383.394000, 34479.668400, 2041.730059, 4083.460118, X, Y) && !ellipse(19140.455000, 34920.111000, 528.793615, 528.793615, 0.000000, X, Y) && !ellipse(21872.053800, 34502.148000, 486.855214, 486.855214, 0.000000, X, Y) && !ellipse(21277.378600, 36697.178000, 1732.360050, 1732.360050, 0.000000, X, Y) && !ellipse(21517.981720, 35712.580780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26080.500885, 29529.968048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20872.166000, 37593.546000, 1602.272046, 1602.272046, 0.000000, X, Y) && !ellipse(23502.389200, 35274.914800, 418.460012, 418.460012, 0.000000, X, Y) && !ellipse(22482.236200, 32994.772000, 1125.248032, 1125.248032, 0.000000, X, Y) && !ellipse(22496.058000, 32664.130000, 771.506422, 771.506422, 0.000000, X, Y) && !ellipse(23251.531800, 30417.852800, 1543.016044, 446.364813, 72.891000, X, Y) && !ellipse(24654.654960, 36221.431800, 631.247218, 442.328813, 220.394000, X, Y) && !ellipse(22119.434000, 33691.158000, 803.528023, 803.528023, 0.000000, X, Y) && !ellipse(22332.441200, 33267.689200, 1499.856043, 405.119212, 68.553600, X, Y) && !ellipse(22700.350000, 32120.806000, 411.902412, 411.902412, 0.000000, X, Y) && !ellipse(20718.115646, 31775.549347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23039.737566, 31127.906924, 1303.800038, 384.280566, 250.348680, X, Y) && !ellipse(23256.826800, 30376.622000, 1173.696034, 1173.696034, 0.000000, X, Y) && !ellipse(26934.664333, 29219.093292, 1224.880035, 345.049002, 71.201983, X, Y) && !ellipse(28009.578796, 34177.647278, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 12:18:45 2013] Writing fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src67.gif
[Sun May  5 12:42:21 2013] Mean detx,y = (-1156.76, 10572.71) 
[Sun May  5 12:42:23 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 12:43:10 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 12:43:10 2013] Setting source spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sun May  5 12:43:10 2013] Setting bgd. spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Sun May  5 14:10:24 2013] Not generating rmf since there are only 99 counts
[Sun May  5 14:10:24 2013] rmf not generated due to insufficient counts
[Sun May  5 14:28:46 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:46 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src67_src_b10.pi.gz = 751.00
[Sun May  5 14:28:46 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src67_bgd.pi.gz = 3030.00
[Sun May  5 14:28:46 2013] Got source and background scale factors 4087759.000000, 22273135.000000
[Sun May  5 14:28:47 2013] User source parameters:
  Position = (269.3, 396.9) = 13 30 53.99 24 22 41.2
  Extent = 20.4 (20.4-40.8)", rotation angle = 0
  Source aperture counts = 194.9 +/- 28.4
  Background aperture counts = 556.1
  Rate = 0.006 +/- 0.0009

[Sun May  5 14:28:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:28:51 2013] Using photon index=1.80, rate=0.00296, arf fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src67.arf
[Sun May  5 14:28:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:28:51 2013] Updating source flux to 1.7e-14
[Sun May  5 14:29:18 2013] Flag c found in src. 67 procflags, skipping spectral fitting
[Sun May  5 14:29:18 2013] Source 67 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 14:29:33 2013] xmm0100240201/analysis//spectral/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src67_pl.csv not found, spectral fit skipped or did not complete